|
| 1 | Demolition of brickwork/stone/boulder masonry, built in cement mortar including all quoins arches pillars, etc, but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed. |
| 2 | Walling of random rubble stone with dressed face masonry uncoursed well bonded bedded and solidly hearted built in cement mortar 1:6 brought upto course complete all as specified and directed. |
| 3 | All as per item srl No-2 here-in-before but except stone complete all as specified and directed. |
| 4 | Precast Cement Concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in bond stones set in cement mortar 1:6 including necessary formwork and finished exposed surface complete all as specified and directed. |
| 5 | Raised pointing to random or polygonal rubble, uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed. |
| 6 | PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate), as in coping, kneelers, parapets, apex stones and similar works including necessary formwork complete all as specified directed. |
| 7 | PVC (SWR) pipes 110 mm single socketed in any length, fixed in retaining wall for weep holes and complete all as specified directed. |
| 8 | Broken stone or boulder of guage exc 80 mm to 150 mm, dry, hand packed tighty, as in back filling of retaining wall complete all as specified and directed. |
| 9 | All as per item srl No-8 here-in-before but excluding stone/ boulder complete all as specified and directed. |
| 10 | Demolition of cement concrete (unreinforced) of any description and in any position not other wise complete all as specified and directed. |
| 11 | PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels and drain etc including necessary formwork complete all as specified and directed. |
| 12 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. |
| 13 | Demolition of cement concrete (unreinforced) in ground floors and pavings exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 14 | 100 mm thick cement concrete type D-2, 1:4:8 (40 mm graded crushed stone aggregate) subbase of flooring complete all as specified and directed. |
| 15 | PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate), 75 mm thick as in hard standing finished even and fair without using extra cement complete all as specified and directed. |
| 16 | Forming Contraction (Dummy) joints 75 mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed. |
| 17 | Dismantling of stone slabs and tiles laid dry or laid dry and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 18 | 80 mm thick machine pressed precast conctete interlocking paver block of any shape and size conforming to IS 15658-2006 of M-40 grade with grey cement and pigments complete all as specified and directed. |
| 19 | 25 mm thick sand cushioning layer under interlocking paver block complete all as specified and as directed. |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and directed. |
| 21 | Factory made precast (Rubber moulded) concrete designer chequered tiles any colour, shape and size not less than 20 cm x 20 cm x 25mm thick (compressive strength not less than 250 Kg/Sqm), set, jointed and pointed with grey cement and pigment over and including 20 mm thick cement mortar 1:6 screed bed or bedding layer complete all as specified and directed. |
| 22 | Dismantling posts or struts embedded in concrete, brickwork, masonry, etc. (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 23 | Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 grade E-165 complete all as specified and directed. |
| 24 | PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 25 | Mild steel screw bolts (machine made) dia of neck 11 mm to 15 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but not exc. 10 cm long complete all as specified and directed. |
| 26 | Preparation of new steel surfaces of any description, over 10 cm in width or girth applying two coats of synthetic enamel paint and over a coat of red oxide primer complete all as specified and directed. |
| 27 | TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 28 | Dismantling of fencing wire mesh (Chain link fencing) any type of size complete all as specified and directed. |
| 29 | Supply only chain link MS galvanised fencing, any size or type including provision of binding wire complete all as specified and directed.Note: BOO shall be ordered by AGE (I) Bhalra to access the wt of chain link fencing. |
| 30 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. Please Enable Macros to View BoQ information |
