|
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soilsBy Mannual Means |
| 2 | Excavation work by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains not exceeding1.5 m in width or 10 sqm on plan including dressing of sidesand ramming of bottoms lift upto 1.5 m, including getting outthe excavated soil and disposal of surplus excavated soil asdirected with a lead in a 50 meter including stacking of usefulmaterial if available |
| 3 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 4 | M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 5 | Providing and laying in position specified grade of cementconcrete for RCC structural elements upto floor five levelincluding curing, compaction, finishing with rendering incement sand mortar 1:3 (1 cement: 3 coarse sand) and makinggood the joints and cost of plastizers (if required ) excludingthe cost of centering, shuttering and reinforcement for Walls(any thickness) including attached pilasters, buttresses, plinthand string courses, fillets, columns, pillars, piers, abutments,posts and struts etc.M20 grade Nominal Mix / Design Mix |
| 6 | Centering and Shuttering with plywood or steel sheetsincluding strutting, propping bracing both ways and removalof formwork for foundation , footings, strap beam, raft , basesof columns etc. |
| 7 | Centering & shuttering with plywood or steel sheets includingstrutting, propping bracing both ways with steel props andremoval of formwork for upto floor five level forColumns, pillars, posts and struts etc. |
| 8 | Suspended floors, roofs, landings, staircases, balconies,girders, cantilevers, bands, coping bed plates, anchor blocks,sills, chhajjas, lintel, beam, plinth beam etc. |
| 9 | Providing and fabricating reinforcement for R.C.C. workincluding straightening, cutting, bending, placing in positionand binding (including cost of binding wire) all complete up tofloor five level |
| 10 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 11 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 12 | Stone cladding/ flooring work dressed bansi paharpur stone in traditional style used in cladding/flooring thk 20-25 mm. with patterns over 25 and 50 mm. thick base in cm 1:6 including pointing with cement mortar 1:2 (1 cement: 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15 mm. as per enclosed drawing and details and instruction of engineer incharge |
| 13 | Providing and fixing of Bansi Paharpur stone chajja 40 mm thick with nosing as per drawing complete. |
| 14 | Providing & Fixing of Bansi Paharpur stone bracket attached to capital of pillars 300mmX225mmX100mm including carving with carving work etc |
| 15 | Single piece of stone element with carving work in Bansi Paharpur stone includes stone pillar, stone base, todies and thabi etc carving work as per direction of engineer in charge |
| 16 | P/F bansi Paharpur stone Kangoore on Boundary wall in size of 375mm x 190mm x 75mm thickness having carving work is as per approved drawing and as per direction of engineer-in-charge. |
| 17 | Providing and Fixing Dholpur White / Mandana stone/ Gwalior mint stone base with white cement & Tinex chamical, & SS Clamp and Fastners (of approved brand) inclusive of moulding, carving, rubbing, polishing complet, laid and jointed with white cement slurry mixed with pigment to match the shade of the slab as per drawing attached with hairline joint at transition including rubbing, polishing and finishing, complete in all respect as per direction of Enginner & Architect with all lead & lift. The Stone measurement will be done of outer most dimension. |
| 18 | Providing and Fixing of Stone Chattris of size (1X1X1.5 ) M in Bansipaharpur stone on 4 pillars of size 0.45M Dia. as per drawing including carving, cladding etc all including required DASA copings and all attached and fixing with SS clamps and fasterners with tenax chemical ,including Planning, developing, making base, carving work, polishing, all loading-unloading, transportation, scaffolding, hoisting, installation with all required T&P (including white cement, pigment, Chemical, SS clamps and fasteners of approved brand etc.), fixing over/on base/surface as per shape-size & placement of approved drawing , finishing, surface treatment etc. covering properly till the date of opening/inauguration of site etc. under the direction of engineer incharge and as per approval from Architect |
| 19 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. South (Red) Above 3601 Cm2 Slabs |
| 20 | Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite/Kota Stone WorkFull Edge moulding |
| 21 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete |
| 22 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches by sandla/loi. (only for colour changing ) |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 24 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). |
| 25 | Providing and fixing cobble stone flooring work dressed stone 100 mm thick in hond fo\inish with pattern as per design over 25-50 mm thick base in cm 1:6 incl. pointing with cement sand mortar 1:2 match the shade of stone with joint as per direction of engineer in chargeBlack kadappa (100*100*100)mm machine cut |
| 26 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 27 | Extra if square,rectangular hollow tubelar sections are used or grill made by flats only |
| 28 | Providing and laying of paver block as per IS 15658 : 2006 (Indian standard for precast concrete block for paving- specification) and IRC : SP:63-2004 (guidelines for the use of interlocking concrete block pavement)M-30, 60 mm thick to be used in non traffic areas like building premises, monument premises, land scapes, public gardens/ park, domestic drives, paths and patios, Embankment slopes, sand stabilization Area etc.( As per table 1 of IS 15658:2006 Category ‘B’ Denated only two side like I,Z,T shape etc. as per IRC SP 63:2004 |
| 29 | Add extra over rates of item No. 11.38, A to C if colored paver blocks are used Please Enable Macros to View BoQ information |
