|
| 1 | M&L for waterproof cement based putty @ 1 Kg (undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface complete all as specified and directed. |
| 2 | M&L for preparation of old surface ( Plastered or unplastered) of walls and applying two coat of water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. |
| 3 | M&L in repair APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm)incl bitumen base primer 0.3Kg per SQM laid over primed surface by forced torch application complete all as specified and directed |
| 4 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laidon 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.complete all as specified and directed. |
| 5 | M&L for one or more coat of heat resistance aluminium paint over bitumen surfaces of any description wood, steel, iron, concrete,brick, stone, etc., exceeding 10cm inwidth or girth complete all as specified and directed. |
| 6 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying single coat of white wash on wall, complete all as specified & as directed. |
| 7 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying single coat of white wash on ceiling complete all as specified and directed. |
| 8 | M&L for single coat of cement based paint on old plastered surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 9 | M&L for single coat of internal emulsion old plastered surfaces of walls including preparation of surfaces (with all work carried out with mechanical sprayer/sander)complete all as specified and directed. |
| 10 | Taking down cement plaster on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 11 | M&L rendering 15mm thick cement plaster in cement mortar (1:4) finished even & fair without using extra cement on brick/concrete surfaces n patch work complete all as specified and directed. |
| 12 | M&L rendering 10mm thick cement plaster in cement mortar (1:6) finished even & smooth without using extra cement on brick/concrete surfaces in patch work complete all as specified and directed. |
| 13 | M&L for two coats of cement based paint on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 14 | M&L for two coats of internal emulsion over on newly/old plastered surfaces of walls including preparation of wall incl old/new surfaces of wall over coat of wall care putty incl scraping down existing treatment/preparation (with all work carried out with mechanical sprayer/sander) complete all as specified and directed. |
| 15 | M&L for prepation of old painted wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 16 | M&L for prepation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 17 | S&F in repair 15mm bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 18 | S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 19 | S&F in repair 20mm bore stop valve/ Gate valve cast copper alloy with handle screwed both ends for GI out let/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed. |
| 20 | S&F in repair 15mm angle cock/ stop cock with flange cast copper alloy, chorminium plated, fancy type, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 21 | S&F in repair Brass Chromium plated sink,WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe in sink and WHB mixer etc. complete all as specified and directed. |
| 22 | S&F in repair Brass Chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe in wall mixer etc. complete all as specified and directed. |
| 23 | S&F in repair covers for PVC overhead water tanks of 500 to 2000 ltr capacity (as per sample) complete all as specified and directed. |
| 24 | S&F in repair Wash hand basin Oval shape / flat back 550x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified and directed . |
| 25 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 26 | S&F in repair waste coupling 32 mm brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 27 | S&F in repair waste coupling steel sinkas per sample brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 28 | S&F in repair PVC connections 15 mm size with brass nuts both side of length 450 mm complete all as specified and directed . |
| 29 | S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixed complete all as specified and directed . |
| 30 | S&F in repair PVC waste pipe 32 to 40 mm for WHB/Sink up to floor trap and fixed complete all as specified and directed. |
| 31 | S&F in repairs brass chromium plated overhead shower 150mm size with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed. |
| 32 | S&F in repair 20 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position complete all as specified and directed. |
| 33 | S&F in repair 600mmx450mm mirror of selected quality glass, mounted on 5mm thick PVC fiber board and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed . |
| 34 | S&F in repair 4 to 5 mm thick mirror of selected quality glass, mounted on 5mm thick PVC fiber board and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed . |
| 35 | S&F in repair aluminium anodised towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed . |
| 36 | S&F in repair MS Rat tail pattern helicle doors spring/ capsule type size 150 to 200mm, ordinary springs including roller and roller plate complete all as specified and directed . |
| 37 | S&F in repairs 110 mm dia, PVC (SWR) single socketed rain water pipe in any length with rubber ring joints fixed to walls incl taking down complete all as specified and directed |
| 38 | S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius. complete all as specified and directed . |
| 39 | S & F in repairs 110 mm dia, PVC bend complete all as specified and directed |
| 40 | Taking up or down 15/16 mm dia CPVC/GI Tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed . |
| 41 | Taking up or down 20 mm dia CPVC/GI Tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed . |
| 42 | S&F of 15mm bore mild steel galvanized tubing medium grade with all fittings such as nipple, union, socket, elbow, bends, etc fixed to walls and making good the distubed surface to match previous structure with complete all as specified and directed. |
| 43 | S&F of 20mm bore mild steel galvanized tubing medium grade with all fittings such as nipple, union, socket, elbow, bends, etc fixed to walls iand making good the distubed surface to match previous structure with complete all as specified and directed. |
| 44 | Supplying and fixing of 20mm bore dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings to walls with hooks, ceiling or laid on floor complete all as specified and directed . |
| 45 | S&F in repair PVC 10 litre capacity valve less syphonic action type, flushing cistern, low/high level, white/coloured with inlet ball valve, float and handle including brackets, etc.complete all as specified and directed. |
| 46 | S&F in repair vitreous China squatting pan Orissa pattern, size 580 x 440 mm white, with integral foot rest including provision of lime concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floors complete all as specified and directed. |
| 47 | S&F in repairs cascade duel flush one peace inbuilt flushing cistern vitreous china wash down water closet pan padestel pattern white including soft seat cover, connection pipe to union of flushing cistern, inlet and overflow pipes,connecting anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed. |
| 48 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed . |
| 49 | S&F in repai Toilet paper holder of chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed . |
| 50 | S&F in repair Chromium plated soap dish including fixing arrangement complete all as specified and directed . |
| 51 | M&L for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed . |
| 52 | S&F 80 mm to 100mm dia round/square grating of CP with or without hole including Jointed to PVC pipe complete all as specified and directed . |
| 53 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples. complete all as specified and directed . |
| 54 | S&F in repair 4 mm thick, plain sheet glass ordinary quality and glazing with oil putty or with wooden beads in squares n.exc 0.5 Sqm in each pane complete all as specified and directed . |
| 55 | S&F in repair 4 mm PVC Fibre glass plain sheet glazing with oil putty, glazing slip with wooden beads in squares/ rectngular any size of each pane complete all as specified and directed . |
| 56 | S&F in repair stainless steel chromium plated decorative drapery curtain rod (colour as approved) of 20 mm dia approved pattern and design including decorative knobs (wall side and free side) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified and directed . |
| 57 | S&F in repair 150mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 58 | Dismentling of wall and ceiling board (fibre .pulp,insulation etc) or insulation board/slab/blanket etc complete all as specified and directed. |
| 59 | Supply & Fixing 18 mm thick, WPC board one side pre laminated and other side white in colour of approved texture as in Kitchen cabinet (with shelves and partitions) inas per manuacturer's instructions( Density 600 ) complete all as specified and directed. |
| 60 | Supply & Fixing 12 mm thick, WPC board one side pre laminated and other side white in colour of approved texture as in Kitchen cabinet (with shelves and partitions) inas per manuacturer's instructions( Density 600 ) complete all as specified and directed. |
| 61 | S&F Continuous (piano) hinges,16 to 18 mm Mild steel, bright finish or electro galvanised Chromium plated complete all as specified and directed. |
| 62 | S&F in repair Anodised alunimun size 605 x 605 mm snap grid frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 63 | S&F in repair 4 mm thick non asbestos fibre cement building board and fixed to suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per pecification and drawing complete all as specified and directed. |
| 64 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.600x600mm grid complete all as specified and directed. |
| 65 | S&F in repair 12 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed. |
| 66 | S&F in repair 8 mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed . |
| 67 | S&F in repair POP cornis of garth exc 100mm nexc 200mm shape and design as approved by Engr-in-Charge fixed to wall/ceiling with PVC rawl plug/ MS screw as required complete all as specified and directed. |
| 68 | Petty repairs to leakage of bib taps,water pipe line ,flushing cistern , pillar cock, stop cock, PVC connection, waste pipes, float valves, angle valve, concealed valve, GI union joints of pipe, re-fixing of bottle trap, etc. by changing the PVC washers/Sheet washers,spindle or any other minor accessories etc complete all as specified and directed. |
| 69 | S&F in repair Rotational moulded polythylene 1000 capacity water storage tank(Cylindrical vertical with closed top) hoisted and fixed in position including PVC float valve 20 mm bore, high pressure with polythene ball & float & dismantling of old water tank complete all as specified and directed. |
| 70 | S&F in repair Rotational moulded polythylene 500 capacity water storage tank(Cylindrical vertical with closed top) hoisted and fixed in position including PVC float valve 20 mm bore, high pressure with polythene ball & float & dismantling of old water tank complete all as specified and directed . |
| 71 | Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each. complete all as specified and directed. |
| 72 | ~ditto~ all as per item No. 71 above but exc 1.50 Sqm n.exc 4 Sqm. complete all as specified and directed . |
| 73 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each. complete all as specified and directed . |
| 74 | Taking down shutters of any description n exc 2 sqm each including rescuring or eaising and adjusting and refixing in same opening.after repair complete all as specified and directed . |
| 75 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 76 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 77 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm (double rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 78 | S&F Factory made solid panel PVC door shutter 30mm (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90o) used instead of exposed portion of PVC sheet beading panelling of wood grain printed PVC sheets to be fitted in the MS frame welded sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supling & fixing in the frame at the site as per specification and drawing shown in SSR Pt-I complete all as specified and directed. |
| 79 | S&F Factory made solid panel PVC door shutter 30mm (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90o) used instead of exposed portion of PVC sheet beading panelling of 0.35mm dia and apparture of 1.3mm dia SS wire mesh to be fitted in the MS frame welded sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supling & fixing in the frame at the site as per specification and drawing shown in SSR Pt-I complete all as specified and directed . |
| 80 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheet fixing in opending as per specification and drawing etc complete all as specified and directed. |
| 81 | S&F in repair for toughned glass as in door partition aurimatic door and similar works 12 mm thick fixed in shutters fixing with two 300mm Stainless Steel handle including double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty incl SS lock heavy duty monogram/ eatching/ writing letter etc complete all as specified and directed. |
| 82 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 83 | S&F MS butt hinges100mm long medium weight, cold rolled. complete all as specified and directed . |
| 84 | S&F MS butt hinges extruded aluminium alloy with galvanised MS hinge pin anodised 100mm long C-22 type complete all as specified and directed. |
| 85 | S&F 150 mm long extruded alu alloy handles, fabricated type, anodised. complete all as specified and directed . |
| 86 | S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy. complete all as specified and directed . |
| 87 | S&F 150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed. complete all as specified and directed . |
| 88 | S&F Aluminium anodised grill coloured coated(anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern(DG 104), with approved standard section and fixed to existing window frame with CP brass/stainles steel screwnot less than 50mm and @ 200mm c/c, incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alu standard section ( 28mm x 19mm x 2mm thick)around the opening, complete all as specified and directed. |
| 89 | S&F for Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame(60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters)(45.5mm x 28mm). Glazing bead (24.5mmx 16mm)will he mitered cut and fusion welded at all corners,including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile,frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system incl 4mm thick glass/PVC fiber sheet as pain required complete all as specified and directed . |
| 90 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. incl 4mm thick glass/PVC fiber sheet as pain and 0.35mm dia apparture of 1.35mm SS wire mesh required complete all as specified and directed. |
| 91 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed. |
| 92 | S&F Coloured Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed in CM(1:6) complete all as specified and directed. |
| 93 | S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick backing coat in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed . |
| 94 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.80 sqm, Single/Double charged digital printed tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor complete all as specified and directed. |
| 95 | ~ditto~ all as per item No 94 above but in skirting laid over and including 10 mm thick plaster in CM 1:4 complete all as specified and directed. |
| 96 | Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed . |
| 97 | M&L for Granite (of any type) tiles 16 to 18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including jointing with solvent, grinding, rounding to edges and polishing complete all as specified and directed . |
| 98 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed . |
| 99 | M&L for brick with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 100 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 101 | M & L for Cement concrete type D2 1:4:8 (using 40 mm graded aggregate) as in fdn filling and mass concrete, sub base complete all as specified and directed . |
| 102 | Dimantling of PVC fibre roof sheeting, corrugated or semi corrugated or similar pattern roof coverings complete all as specified and directed. |
| 103 | M&L for Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed . |
| 104 | M&L for Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed . |
| 105 | S&F for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; complete all as specified and directed. |
| 106 | M&L for preparation of new/old wall surfaces incl scrapping/rubbing down existing treatment with using sander machine and applying coat of putty to make surface even and smooth (using mechanical machines only) complete all as specified and directed. |
| 107 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 108 | Dismantling of fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed. |
| 109 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 110 | Schedule of credit of Amount Rs. 26,055.00 to be deducted during AOC. Please Enable Macros to View BoQ information |
