|
| 1 | S&F HDPE Pipe PN-10 of 150 mm dia including all fittings like Bend,Tee,coupler ground shoe bend etc fixed to wall including fixing clapms of FI 18x3 mm including fixing nut bolt washers complete all as specified and directed. |
| 2 | Taking down of eaves gutter, rain water pipes of any size or pattern including all fittings etc. complete all as specified and directed. |
| 3 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. Including Tile Bedding layers and removing out side MD Land) complete all as specified and directed. |
| 4 | M&L for cement concrete in foundations, filling and masss concrete type C2 1:3:6 (40mm graded aggregate) complete all as specified and directed. |
| 5 | Excavating in trenches in any type of soil , n exc 1.5 m wide and n. exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soil complete all as specified and directed. |
| 6 | Returning, filling in, including spreading ,leveling, watering and well ramming in layers n. exc 25 cm with soil complete all as specified and directed. |
| 7 | Removal of excavated material (soil) to a distance exc 50 m n. exc 250 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed. |
| 8 | M&L for Walling of RR Masonry Built In cement Mortar (1:6) uncoursed including PCC (1:3:6) Type C1 Bond stone complete all as specified and directed. |
| 9 | M&L for Walling of RR Masonry Built In cement Mortar (1:6) uncoursed including PCC (1:3:6) Type C1 Bond stone (Except Stone) complete all as specified and directed. |
| 10 | M&L for Flush pointing to RR Mosonry uncoused or brought up to courses in CM (1:4) complete all as specified and directed. |
| 11 | M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:4).complete all as specified and directed. |
| 12 | M&L for 15mm thick rendering on any faces of stone, concrete or brick work in CM 1:4 surface finished even and fair complete all as specified and directed. |
| 13 | M&l for cement concrete 1:2:4 type B1 (20 mm graded stone aggregate) as in coping including necessary formwork complete all as specified and directed. |
| 14 | M&L for cement concrete type B2 , 1:2:4 using 40 mm gradded stone aggregate in surface channels and drains including necessary formwork complete all as specified and directed. |
| 15 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 16 | Demolition of floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 17 | M & L for cement concrete in foundations, filling and masss concrete type D2 1:4:8 (40mm graded aggregate) complete all as specified and directed. |
| 18 | M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.80 sqm, Single/Double charged digital printed tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor complete all as specified and directed. |
| 19 | ~ditto~ all as per item No. 18 above but in skirting laid over and including 10 mm thick plaster in CM 1:4 complete all as specified and directed. |
| 20 | M&L for Vetrified paver ceremic tiles 10 mm thick, in light shade (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed. |
| 21 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil complete all as specified and directed. |
| 22 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 23 | Supply only chain link fencing any width and dia of wire not less than 3.00 mm complete all as specified and directed. |
| 24 | M&L mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for securing chain link fencing complete all as specified and directed. |
| 25 | S&F framed work as in doors or gates of angle or other section with gussest plates, rails, braces, etc, complete drilled for fixing and incl steel sheeting or other covering doors etc, to be prepared for hanging and sliding with and including either hooks and hinges or steel hnging door fittings and fixing complete conferming to gde Fe 410-w complete all as specified and directed. |
| 26 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 27 | M&L in repair Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed. |
| 28 | Supply and fixing in repair Concertina Coil Mild steel punched tape concertina coil with Zinc coating 450mm Ø with clips spaced 24mm dispensed in compact rolls weighing 7.5 kg/coil covering an average span of 7.5m on expansion to be laid between the 'Y' angle pickets joining by welded at 45 degree slope LAIP. complete all as specified and directed. |
| 29 | Dismantling posts or struts concrete work or brick masonry (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 30 | Dismentling of chain link fencing wire mesh any type complete all as specified and directed. |
| 31 | Dismentling of barbed wire wire mesh any type n exc 4kg complete all as specified and directed. |
| 32 | S&F for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 33 | Preparation of two coats of synthetic enamel paint on new steel surfaces of any description, over 10cm in width or girth,not otherwise described including preparation over a coat of red oxide Zinc chrome prime complete all as specified and directedr complete all as specified and directed. |
| 34 | M&L for PCC (1:2:4) type B2, (using 20 mm graded stone aggregate), as in foundations / mass concrete/ levelling course complete all as specified and directed. |
| 35 | M&L for Granite slab/Floor 18 mm to 20 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:4) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing complete all as specified and directed. |
| 36 | Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 37 | M&L for 75mm thick PCC (1:2:4) Type C2 using 40mm graded stone agg as in plinth protection surface even and fair without using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and diected |
| 38 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. |
| 39 | M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed. |
| 40 | M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed. |
| 41 | M&L for Brick work with Fly ash bricks straight or curved on plan exc 6m mean radius built in CM (1:6) using old size bricks complete all as specified and directed. |
| 42 | Taking down cement plaster or cement lime plaster or wall tiles of any description on bricks or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 43 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement. complete all as specified and directed. |
| 44 | Material & Labour for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new/old work including preparation of existing wall surfaces including primer/removing of existing treatment etc complete all as specified and directed. |
| 45 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces including preparation of existing wall surfaces (and removing existing treatment) complete all as specified and directed. |
| 46 | Material & Labour for providing and fixing stainless steel (Grade 304) railing /moulded/ orinimantal door made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 47 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand. complete all as specified and directed. |
| 48 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 49 | M&L for moorum/red bajri filling in floors or paving laid in layers n. exc 15 cm thick spreading levelled and blinded with earth and rammed including watering complete all as specified and directed. |
| 50 | S&F fancy type stainless steel draphery rods with brackets 20-25mm bore including stop roller lid and knobs etc cut to length as required of colour complete all as specified and directed. |
| 51 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 25mm bore pipe complete all as specified and directed. |
| 52 | Taking down steel tubing and connections including cleaning for refixing or removal form site for upto 20mm bore pipe complete all as specified and directed. |
| 53 | Taking down chowket or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and directed. |
| 54 | S&F in repair APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm)incl bitumen base primer 0.3Kg per SQM laid over primed surface by forced torch application complete all as specified and directed |
| 55 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.complete all as specified and directed. |
| 56 | M&L for one or more coat of heat resistance aluminium paint over bitumen surfaces of any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth complete all as specified and directed. |
| 57 | Dismentaling of timber scantling as in fillets, rails posts rafters purlin etc under 40 Sqcm in section as in unframed work complete all as specified and directed |
| 58 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position including dismentling of old tank and fixing of 20 mm float valve complete all as specified and directed. |
| 59 | Dismentaling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 60 | S&F in repair for Rubber sheet with fabric backing or insert and plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive with ridge or fluted topping complete all as specified and directed. |
| 61 | S&F in repair Solid PVC Wall Lining consisting of 5mm thick Plain or wood grid printed one side derocative other side plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 62 | S&F in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. complete all as specified and directed. |
| 63 | S&F for Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame(60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters)(45.5mm x 28mm). Glazing bead (24.5mmx 16mm)will he mitered cut and fusion welded at all corners,including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile,frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system incl 4mm thick glass/PVC fiber sheet as pain required complete all as specified and directed. |
| 64 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. incl 4mm thick glass/PVC fiber sheet as pain and 0.35mm dia apparture of 1.35mm SS wire mesh required complete all as specified and directed. |
| 65 | Dimantling of PVC fibre roof sheeting, corrugated or semi corrugated or similar pattern roof coverings complete all as specified and directed. |
| 66 | M&L for Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 67 | M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 68 | Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed works complete all as specified and directed. |
| 69 | S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 70 | S&F for 5 mm thick ordinary glass and glazing with oil putty in square area exc 0.50 sqm in each pane complete all as specified and directed. |
| 71 | S&F for 12 mm thick Prelaminated particle board, exterior grade,prelaminated both side with decorative choice lamination colour both side side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 72 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed. |
| 73 | M&L for sand filling under Target/ Butt including shape and size as per site/size of Butt as in repair comlete all as specified ans directed.Up to 15 m height complete all as specified and directed. |
| 74 | fabrication for erection fixing only MS plates (plain or chequred ) chennals,square cut or notched (ordanery) and counter sunk forming holes with out any attachments including welding all round height up to 15m including bottom of slab.(Grade of steel Gde E-250 quality A) Except plate complete all as specified and directed. Note :- Old MS plate shall be re-used retrived fron item No. 26 |
| 75 | M&L for MS plates (plain or chequred ) chennals,square cut or notched (ordanery) and counter sunk forming holes with out any attachments all as specified and directed.including welding all round height up to 15m including bottom of slab.(Grade of steel Gde E-250 quality A) complete all as specified and directed. |
| 76 | S&F for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars,stiffeners, gusset plates, etc fixing of MS plate and like. complete all as specified and directed. |
| 77 | S&F for mild steel screw bolts machine made with hexagonal or square heads at one ends and secured to other other or screwed both ends to be fitted washer and one hexagonal nut exc 10 cm but n, exc 15 cm dia 16 to 20 mm complete all as specified and directed. |
| 78 | M & L for 100mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in floor /Paving finished even and smooth without using extra cement complete all as specified and directed. |
| 79 | M&L for PCC 40 mm thick floor type B-0 1:2:4 (using 12.5 mm stone aggregate) surface fair and even laid in pannel complete all as specified and directed |
| 80 | M&L for Granolithic concrete 1:1:2 floor topping 30mm thick; laid over cement concrete subfloors etc. and finished to an even and fair surface incl Wearproof topping of 20mm thick as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth (incl metallic hardner as per specification of SSR Part-I/Manufacturer instruction complete all as specified and directed. |
| 81 | M&L for 20 mm thick Wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth (except metallic hardner) complete all as specified and directed. |
| 82 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to removedust, etc and applting 1kg per sqm cement slurry for bonding between new and old surface complete all as specified and directed. |
| 83 | Sypply only metallic coat hardener of approved make complete all as specified and directed |
| 84 | S&F plastic dividing strips of 38mm wide and 1.5mm thick for laying floor pannels complete all as specified and directed |
| 85 | Schedule of credit of Amount Rs. 88,000.00 to be deducted during AOC. Please Enable Macros to View BoQ information |
