|
| 1 | Description |
| 2 | Labour charge for fabrication and installation of structuralGlazing/Curtain Wall made from annodized extruded allooy aluminium sections for the following units:- Structural Glazing made of extruded and annodized alloy aluminium sections, fabrications including cutting to proper shape and size, drilling including cost of brackets, fastener bolt, mullion bolt, nuts & washers, maskin tape, double side adhesieve crosslink foam (used for guard of glazed silicon on sub-frame), tissuepaper foam (used as filler between sub-frame and under backing of weather silicon), screws and other necessary hardwares, fixing of glass as per drawing, specification and direction of Engineer-in-Charge. (The rate includes hire charges of all tools and plants, including all incidentalcharges, adhesieve, joiners such as screw,cleate angle,etc. butexcluded the cost of extruded aluminium sections, glass, glazed silicon, weather silicon etc.) |
| 3 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987; coloured, toughened glass conforming to IS: 2553-1992 (part-II), (i) 6mm thick |
| 4 | Supplying Glazing Silicon of approved make and brand for fixing of Glass on Sub-frame as per direction of Engineer-in-charge Structural Glazing/Curtain wall etc. for Glazing Silicon for fixing Glass on Sub frame |
| 5 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia M.S. tube placed 1.5 metrecentre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with thebuilding etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in charge Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for executionof all items for such works. . |
| 6 | Supplying stainless steel functional hinge for casement window as per approved brand as directed by Engineer- in -charge. (Natural White), 16 inch |
| 7 | Supplying, fitting and fixing concealed False ceiling Framework with G.I. Section (perimeter channels having one flange of 20 mm. and another flange of 30 mm. with thickness of 0.55 mm. and web of length 27 mm., along the perimeter of the ceiling, screws fixed to the wall with help of nylon sleeves or PVC dash fastners @ 610 mm c/c. then suspend G.I. intermidiate 'C' section with web 90 mm. and flanges of 15 mm. each from soffit @ 1200 mm c/c with ceiling angle of size 25 mm. X 10 mm. X 0.55 mm. fixed to soffit G.I. Cleat and Steel expansion fasteners. Ceiling section of 0.55 mm. thickness having web of 51.5 mm. and two flanges of 26 mm. each with lips of 10.55 mm., are then fixed on to the intermediate channel with the help of connecting clips in the direction perpendicular to the intermidiate channel @ 610 mm c/c) with fully threaded fiber cement screws @ 300 mm c/c. all complete as per the drawing and direction of Engineer in-Charge. Sectionspecification :- Perimeter Channel :- 30 mm X 20 mm X 27 mm, thickness 0.55 mm (min), Intermidiate Channel :- 15 mm X 90 mm, thickness 0.90 mm Ceiling Section :- 51.5 mm X 26 mm X 10.55 mm, thickness 0.55 mm (min), Ceiling Angle :- 25 mm X 10 mm, thickness 0.55 mm (min)., |
| 8 | Supplying, fitting and fixing Eco-friendly,Moisture Resistance and Incombustable Gypsum plaster board ( Density > 700Kg per Cu.m.) confirming to IS 2095- Part 1, 2011 of approved design and brand finished with gypsum jointing compound to form a joint less false ceiling all complete as per drawing & direction of Engineer - in- Charge. 12.5mm thick tapered edged Gypsum Plaster Board |
| 9 | Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in- Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor,19 mm (Brand: Green ply or equivalent) |
| 10 | Providing and fixing and fitting in position, medium density fibre board conforming to IS: 12406-1988 for plain and IS: 14587-1998 for prelaminated made of wood fibre bonded with Urea formaldehyde for interior grade and Phenol Formaldehyde for exterior grade conformingto per IS:848-1974 as per approved make and brand as per direction of Engineer-in-Charge. In Ground Floor, Interior grade, 8 mm |
| 11 | Supplying, fitting and fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost oflabour, adhesive and all incidental charges thereof. In ground floor, Glossy/Matt/Suede excluding surface texture or metallic lustre. 1. 5 mm |
| 12 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On steel or other metal surface : With other than hi-gloss of approved quality, Two coats (with any shade except white) |
| 13 | Painting with Painting with ready mixed red lead paint of approved make and brand : 2 coats |
| 14 | Supplying, fitting and fixing |
| 15 | Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. Heavy type (I.S.I. size 3) |
| 16 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: 100 mm grip x 12 mm dia rod, With continuous plate base (Hexagonal/ Round rod) |
| 17 | Supply and fitting Ball Bearing Drawer Channel 25cm (300mm) - Zn (45kg), Godrej or equivalent |
| 18 | Supply and fitting Beaded Chain for Roller Blinds, Roman Blinds & Vertical Blinds |
| 19 | Labour for taking out rolling shutter (only shutter portion) dismantling by parts for repair or (replacement of damaged parts only), rehanging and refitting the same in position after necessary repairs (excluding the cost of supply of new parts). |
| 20 | Oiling and greasing of |
| 21 | Renewing spring of rolling shutter as per existing size and shape including fitting fixing complete. |
| 22 | Supplying, fitting and fixing single skin, colour coated trapezoidal profile for roofing sheet shall be made of 0.45 mm BMT (base metal thickness), 0.5 mm TCT (total coated thickness excluding paint, G550 (min 550 yield strength), of Zincalume metallic coating (IS 15965) with high solar reflectance index (SRI) value for better coiling as per thermatech technology, 1000-1500 mm effective cover width with five major corrugation, 28 mm high rib spaced at 203 mm c/c with subtle square flunting in the pan and the end rib shall have anti capillary groove and return leg. The sheet shall be fastened with 40 micron zinc coated or 25 micron zinc-tin alloy coated, hex head, self-drilling screw as per IS 3566-2002 Class 3 fastener. The base steel shall be coated with Zinc- aluminium alloy Zincalume (AZ 150), i.e, 55% Al, 43.4% Zinc, 1.6% Si, minimum of 150g/sq cm coating total on both sides, pre painted with colorbond XRW (exterior roofing, walling) paint system of 35 micron super durable polyester paint (SDP) with stable inorganic pigment with no lead contents conforming IS15965. The sheet shall be free from defects and have brand marking of the manufacturer giving product details on the back of the sheets at regular interval confirminggenuity of the material complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work, laps not payable) Brand: TATA, colour: Blue, all floors. |
| 23 | Supply & applying Weather Silicone sealant of approved make and brand for fixing of grove line between the Glasses as per direction of Engineer-incharge. for Structural Glazing/Curtain wall complete in all respect with labour, material, hanging arrangement etc Weather Silicone sealant for filling the Grove line between Glasses or any other material for facial work |
| 24 | Engaging labour(Coolie) for material shifting as instructed |
| 25 | Supplying, fitting and fixing 18 mm thick marble partition slab with chawk doongri marbel square cut, both sides polished with two front corners rounded and edges polished. |
| 26 | Supplying bib cock Spindle, ESSCO type, fitted & fixed complete |
| 27 | Supplying olid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings inall floor, 32 mm thick shutters (single leaf). |
| 28 | Taking out shutter of door and window, dismantling by parts (for repair or replacement of damaged parts) with old fittings but with new screws as necessary. (Where different parts of , reassembling and refitting and rehanging same same shutter are renewed under different item, payment under item 73 will be made once only). |
| 29 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. 100mm. X 58mm. X 1.90mm. (oxidised fittings) |
| 30 | Wood work in door and window frame fitted and fixed in complate, including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). Sal : Local. |
| 31 | Supplying, fitting and fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flatand 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with 7 mm (5 mm+2mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. All floorusing |
| 32 | Godrej Hydraulic door closer fitted and fixed complete. Heavy type |
| 33 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835 1987. 4mm thick frosted/ smoke glass.- |
| 34 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. Area uoto 2.5 sqm |
| 35 | Supplying stainless steel functional hinge for casement window as per approved brand as directed by Engineer- in -charge. (Natural White), 300 mm long |
| 36 | Supplying, fitting and fixing bib cock or stop cock: Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand |
| 37 | Flush pipe with union spreaders and clamps all in C.P. brass for single stall urinal, fitted and fixed complete |
| 38 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 1965 together with brass C.P. hinges, / 600 mm X 450 mm |
| 39 | Supplying bib cock Spindle, Jaquar type, fitted & fixed complete |
| 40 | Supply of of bib tap with flange (equivalent to Watertec MS 103001A) |
| 41 | Supplying heavy duty top pin/set of pivots of local make and approved by the Engineer-in-charge |
| 42 | Supplying, fitting and fixing low-down cistern parts Internal fittings for cistern complete of approved make. Please Enable Macros to View BoQ information |
