Tender For Restoration Of Rain Damaged Of Lwss Manai Pargod Under Section Manai Sub Division Manai In Tehsil Harchakian Distt, Kangra, (Hp) (Sh:- L/J & Testing Of G.I Pipe Of Various Diameter I/C All Fitting/Accessories In Various Locations Under Sec, Shahpur-Himachal Pradesh
TDR : 56011566
Tender Notice
BOQ
9 Days Left
Shahpur
Himachal Pradesh
Tender For Restoration Of Rain Damaged Of Lwss Manai Pargod Under Section Manai Sub Division Manai In Tehsil Harchakian Distt, Kangra, (Hp) (Sh:- L/J & Testing Of G.I Pipe Of Various Diameter I/C All Fitting/Accessories In Various Locations Under Sec
Name of Work:- Restoration of rain damaged of LWSS Manai Pargod under Section Manai Sub Division Manai in Tehsil Harchakian Distt, Kangra, (HP) (SH:- L/J & testing of G.I pipe of various diameter i/c all fitting/accessories in various locations under Section Manai). (Under PDNA). Estimated Cost- 288511/- Earnest Money- 5017/- Time Limit- Three Months
Sl. No.
Item Description
1
Excavation in foundations,trenches etc., in earth work, lift upto 1.50 mts. Stacking the excavated soil not more than 3 mts. Clear from the edge of the excavation & then returning the stacked soil in 15 cms. Layers,when required into plinths sides of foundation etc.,consolidating each deposited layers by ramming & watering & then disposing of all surplus excavated earth as dierected within all leads & lifts as per entire satisfaction of Engineer in charge
2
Laying ,jointing, with circumferential butt joints by electrical arc welding & flanged pipes with 5% flanged joints and remaining 95% with butt welding(Welding thickness shall be equal to pipe wall thickness) and testing of G.I Pipe of approved store issued rate make of following diameter confirming to IS:1239:1990 (Part-II) (latest with up to date amendments having wall thickness as specified below capable of withstanding required test pressure , including manufacturing and fabrication of reducers taper all shorts pieces, bends etc as per site requirement made from parent tubes. The laying of pipe shall also include flanged joints duly welded in three layer (one inner and two outer) Where ever required as per direction of Engineer in charge (Earth work in trenches and the cost of flanges i/c nut and bolts gasket will be measured and paid for separately) and all operation such as cutting welding and jointing fabrication of bends tees i.e lowering and laying in excavated trench to ensure required level including flushing cleaning and hydraulic testing complete in all respect to the entire satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The welding electrodes shall be as per IS 814 of Advani Overlikon/Over cord s/s make. The rates also includes entire carriage of material ,flushing, Cleaning and Hydraulic testing,DP test of butt welded joints complete in all respect and to the entire satisfaction of Engineer in charge with in all leads and lifts
3
150 mm dia
4
Dismantalling of existing GI Flanged pipe in trenches of 150 mm dia and stacking properly of dismnatled pi[e at the suitable place as directed by the Engineer in charge ( Earth work to be measured and paid for separately) within all leads and lifts.
5
150 mm dia
6
Relaying/Rerouting of existing GI Flanged pipe in trenches of 150 mm dia and stacking properly of dismnatled pi[e at the suitable place as directed by the Engineer in charge ( Earth work to be measured and paid for separately) within all leads and lifts.
7
150 mm dia
8
Providing circumferential butt welded joints by electrical arc welding to GMS pipe, welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerilikon (Adore)-CITOJET/ES/ESAB make,conforming to IS 814-1991, include Die pentration test,at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge.
9
150 mm dia
10
100 mm dia
11
80 mm dia
12
65 mm dia
13
Providing and Fixing Cast iron Sluice Valve of kirloskar,Kartar, Bir & Leader PN=1.6 Kg/cm square or any other ISI make including rubber gasket, nuts & bolts etc. complete in all respect with in all leads and lifts and as per entire satisfaction of the engineer in charge.
14
150 mm dia
15
Wire Crates of G.I. wire filleds with boulders with square cut faces against the wire( wire crate to be measured and paid for separately
16
Wire Crates of G.I. wire filleds with boulders with square cut faces against the wire ( Boulder filling to be measured and paid for separately) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
