|
| 1 | Dismantaling structural steel work incl doors, gates but excluding framed trusses etc complete all as specified and directed. |
| 2 | S & F MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completFe-290, Gde-E-165 complete all as specified and directed. |
| 3 | S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 4 | Dismantling posts or struts (wood, steel, or RCC) any section, including taking out embedded portion in concrete, brick work, masonry etc complete all as specified and directed. |
| 5 | S & F of MS fencing posts/struts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 6 | Dismantling fencing wire mesh of any type complete all as specified and directed. |
| 7 | Supply only Chain link MS galvanised fencing any size or type complete all as specified and directed. |
| 8 | Fixing only Chain link fencing including line wires any mesh, size and type of any type of standards, rails, straining bolts, etc including provision of binding wires complete all as specified and directed. |
| 9 | S&F Mild steel screw bolts (machine made) 16 to 20 mm diameter of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long and n exc 10 cm long complete all as specified and directed. |
| 10 | S&F Flat iron welded or jointed in connection with framed work including securing bolts and all necessary drilling, bolting or reverting and similar work conforming to Fe-410-0 complete all as specified and directed. |
| 11 | MS round bars/strengthening bar 10mm dia & over cut to length bent to shape required incl cranking bending spirally for hoping for colm & backing ends and binding with & include MS wire (aheaded ) not less than 0.90 mm dia or securing with clips quality confirming to Fe-410W(grade E-250)Quality A or Fe 290 (gde-E-165) complete all as specified and directed. |
| 12 | Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 13 | M & L for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates as in plinth protection/paving complete finished fair and even complete all as specified and directed. |
| 14 | Material and labour for 50mm thk (average) PCC 1:2:4 type B-1 using 20mm graded stone agg as in roof padding finished even and smooth without using extra cement complete all as specified and directed. |
| 15 | M&L for Plain cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in filling and mass concrete complete all as specified and directed. |
| 16 | M&L Providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof, chajjas, coping, bed blocks and similar work including necessary form work complete all as specified and directed. |
| 17 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid/bedded and pointed in any type of mortar and removing from site upto 500 mtr distance complete all as specified and directed. |
| 18 | M&L for 100mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 19 | M&L for 40mm thick layer of sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 20 | M&L for machine pressed precast concrete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade complete all as specified and directed. |
| 21 | M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with gray cement and pigment over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 22 | S&F in repair galvanised two strand steel barbed wire 2.24 mm dia barbed wire with 2 mm barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised MS wire staples or steel pins etc as directed (each line wire to be measured) complete all as specified and directed. |
| 23 | Restraining and resecuring barbed wire including making good staples etc (each line wire to be measured) complete all as specified and directed. |
| 24 | S & F in repair concertina coil of 610mm dia (in stretched position) hot deep galvanised steel wire coated with CLR ante corrosive coating making diamond shape with the help of devotail clips (18 SWG) fixed over barbed with the angle iron the concertina coil is to be fixed with barbed wire at points where coil touched the bottom barbed wire with the help of hog rings (14 SWG) complete all as specified and directed. |
| 25 | Demolition of brick work / stone masonry/PCC block built in cement mortar of any description complete all as specified and directed. |
| 26 | M & L walling of random rubble, uncoursed, Bangalore type masonry well bonded bedded solidly hearted built in CM 1:6 complete all as specified and directed. |
| 27 | All as per item No (18) above except stones complete all as specified and directed. |
| 28 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6 complete all as specified and directed. |
| 29 | Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and directed. |
| 30 | M&L for 15mm cement plaster in CM 1:4 on fair finished wall surfaces even and smooth without using extra cement complete all as specified and directed. |
| 31 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement and user water proofing compound complete all as specified and directed. (Note : WPC will be measured and paid separately under relevant item) |
| 32 | Supply only integral water proofing compound complete all as specified and directed. |
| 33 | Racking out joints / points in cement mortar to squared rubber masonry coursed or uncoursed complete all as specified and directed. |
| 34 | M&L raised pointing to random or polygonal rubble, un- coursed stone masonry or brought upto courses in CM 1:4 complete all as specified and directed. |
| 35 | M&L preparation of new plasterd wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 36 | M&L preparation of new steel surface over 10 Sqm cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 37 | M&L preparation of old plastered wall surface incl. washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of cement based paint complete all as specified and directed. |
| 38 | M&L for preparation of old surfaces of wall including complete removal of existing treatment and preparation of surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over 3mm wall care putty complete all as specified and directed |
| 39 | M&L for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of white wash complete all as specified and directed. |
| 40 | M&L for preperation of old painted surfaces of steel and iron work of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint any tint complete all as specified and directed. |
| 41 | M&L for preparation of old external surfaces of walls inclluding cornices, plasters etc(plastered or un plastered surfaces) and applying one coats of exterior emulsion coloured complete all as per manufacture instructions complete all as specified and directed. |
| 42 | Demolition of reinforced cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 43 | M&L for RCC (nominal mix) type B-1, 1:2:4, using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 44 | M&L for RCC (nominal mix) type B-1, 1:2:4, using 20mm graded crushed stone aggregate as in Beams, cantilevers, bressumm- ers, lintels over 1.5m span complete all as specified and directed. |
| 45 | M&L for RCC (nominal mix) type B-1, 1:2:4, using 20mm graded crushed stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 46 | Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cracking bending spirally hooking ends and binding with MS wire (annealed) no less than 0.90 mm dia complete all as specified and directed. |
| 47 | Ditto, all as per item ser No. (46) above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 48 | Formwork to sides of flat rough finished surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 49 | Formwork to sides of flat rough finished surface of concretepillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 50 | Formwork to soffits of suspended slabs such as flat roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick rough finished surfaces of concrete (Horizontal or sloping) complete all as specified and directed. Please Enable Macros to View BoQ information |
