Tender For Repair/Maintenance Security Wall, Chain Link Fencing And Maintenance Of Drain Work At Aor Of Age B/R-I Under Ge (East) Agra
Tender Value
30 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Security Wall, Chain Link Fencing And Maintenance Of Drain Work At Aor Of Age B/R-I Under Ge (East) Agra
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars, drain etc including removal of spoil etc complete all as specified and directed. |
| 2 | M&L for brick work with subclass B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | M&L for brick work except bricks with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed. Note:- Bricks obtained from item No 1shall be reused after cleaning and no extra payment shall be made on this account. |
| 4 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 5 | M&L for 15mm thick plastering in CM 1:4 on brick surfaces of walls & finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 6 | M&L for washed stone grit plaster on exterior walls in two layers , under layer 12mm th cement plaster 1:4 ( 1 cemant : 4 coarse sand ) furrowing the under layer with scratching tool , applying cement slurry on the under layer @ 3 Kg of cement per sqm , top layer 15 mm th cement plaster 1 :1 / 2 :2 ( 1 cement : 1/2 coarse sand : 2 stone chipping 10 mm nominal size ) in panels with groove all arround as per approved pattern incl. scrubbing and washing the top layer with brushes and water to expose the stone shipping complete all as specified and directed. |
| 7 | Forming groove of uniform size 15 mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens nailed to the under layer incl. removal of wooden battens , repair to the edges of panels and finishing the groove complete all as specified and directed. |
| 8 | M&L For PCC (1:2:4) type B1 using 20 mm graded cushed stone agg as in band , coping ,benching and the like including necessary form work complete all as specified and directed. |
| 9 | S&F in repairs precast cement concrete louvers and jallies, boundry wall, 45 mm thick (measured solid) including all mouldings set in cement mortar 1:4 type B0 1:2:4 (12.5 mm graded aggregate) complete all as specified and directed. |
| 10 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer at any height (n.Exc 11m )incl necessary scaffolding /Centreing etc complete all as specified and directed. |
| 11 | Dismantling posts or struts (wood, steel or R.C.C any section including taking out embedded portion in concrete etc complete all as specified and directed. |
| 12 | Dismantling MS work of any description not otherwise provided for complete all as specified & directed |
| 13 | M&L mild steel work of angle iron or flat iron etc for hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, alusters, nosing to steps including embeding in concrete and screwing etc, angle iron for posts, struts and swan neck in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 14 | S&F mild steel work in framed work such as grills, gratings etc with ends of bars shouldered and/ or riveted or forged into spikes framed girder bar,bared ironed door hung as gate includ ing pintle hinges, stops and hand made sliding bolt and similar work confirming to FC 290 gde-E-165, incl dismantling complete all as specified and directed. |
| 15 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed. |
| 16 | S&F in repair for Galvanised, 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rail straining bolts, including securing or tying at crossings with and provision of galvanised mild steel pins, etc. complete all as specified and directed. Note : Each line wire to be measured) |
| 17 | Excavating in post holes (or similar holes) each n exc 0.5 cu.m in soft/loose soil, getting out, returning, and removal complete all as specified and directed. |
| 18 | M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 19 | Dismantling fencing wire mesh, chain link any type and any size etc complete all as specified and directed. |
| 20 | S&F G I chain link fencing of any mesh size 75x75 mm and 3.15 mm dia of wire to any type fixing with flat iron and nut bolts etc complete all as specified and directed.Note :- flat iron will be measured and paid separately. |
| 21 | S&F of Mild steel round bars Fe 290 (Gde - E-165)10mm dia and over, cut to length, bent to shape required, including cranking, bending hooking ends and binding and fixed with flat iron alongwith fixing with chain linkfencing etc complete all as specified and directed. |
| 22 | S&F screw bolts (machine made/self taping) with hexagonal or sqare heads at one end and screwed the other each screw to be fitted with one washers and one hexagonal or square nut length of bolts n exc 50mm and dia of shank 8 to 10 mm dia etc complete all as specified & directed. |
| 23 | M&L for preparing new/old plastered or unplastered surfaces of walls and applying two coats of Acrylic weather proof Exterior paint (Apex paint) on old plastered or new plastered surfaces of walls or concrete surfaces at any height complete all as specified and directed. |
| 24 | M&L for preparing old plastered or unplastered surfaces of walls and applying one coats of Acrylic weather proof Exterior paint (Apex paint) on walls or concrete surfaces at any height complete all as specified and directed. |
| 25 | M&L for machine pressed coloured rubber moulded chequered tiles 30 cm x 30 cm x 20 to 22 mm thick set, jointed & pointed in neat cement slurry in floors over 15 mm thick screed bed in CM 1:6 incl dismantling of old tiles and removing the dismantling material from site n.exc 2km distance complete all as specified and directed. |
| 26 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing & dismantling old stone and removing the dismantling material from site n.exc 2km distance complete all as specified and directed. |
| 27 | Demolition of cement concrete (unreinforced) in any position n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 28 | M&L for PCC1:3:6 type C2 using 40 mm graded stone aggregate as in Drain bed complete all as specified and directed. |
| 29 | M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in coping,benching, drain surfaces to be finsied even and smooth without using extra cement complete all as specified and directed. |
| 30 | S&F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 31 | M&L for RCC Pre-cast factory made drain cover slabs heavy duty (35MT) to support vehicle traffic etc in rectangular shape complete complete all as specified and directed including demolition.Make: ARIHANT, A1 cement company, G Traders Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender