|
| 1 | Development |
| 2 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 3 | Carraige of Good Earth by manual upto 1 k.m. |
| 4 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 5 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
| 6 | Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and then rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly, as per direction of officer in charge. |
| 7 | Providing and stacking of Calliandra hybrida of height 75-90 cm. with 4-5 branches in bag of size 25 cm as per direction of the officer-in-charge. |
| 8 | Providing and stacking of Tecoma gaudichaudi of height 60-75 cm. with 5-6 branches in p.bag of size 25 cm as per direction of the officer-incharge. |
| 9 | Providing and stacking Clerodendrum inerme having ht. 25 cm to 30 cm multi branched in 25 cm size of Earthen Pot / Plastic Pot and as perdirection of the officer-in-charge. |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:13.61.1 Two or more coats on new work. |
| 11 | Providing and Placing of precast RCC benches (chair hench with back Rest) using Cement Concrete grade M-30 consisting of 2 No. L-Shaped base support of thickness 100 mm having Back: height 1000mm, front height 450mm and Base width 620mm having 5 No. of RCC planks1500x100x50 mm and one number plank of size 1500x200x50mm in the approved colour and shade; The minimum weight of 'MS Reinforcemen bar in the base support will be 3.4 Kg-having 4 Nos. 8 mm día M.S Bar distributed along the section and periphery of the legs with sufficient No. of 4 mm dia MS stirrups. Each base support will have 3 Nos. 12mm dia (2. Nos. 40mm and one number 65 mm long) galvanised coupling nuts welded suitably to the main reinforcement at appropriate locations so as to receive bolts for fixing of seats of concrete planks on base support and 3 holes to received carriage bolts for fixing back rest planks. The minimum weight of MS reinforcement bar in the plank of 200mm wide will be 4.4kg and of 100mm wide 2.9 kg. All the RCC Planks will have 2 holes of 14mm dia at appropriate location, so as to receive 12mm dia galvanized bolts for fixing on the base support. One of the planks of size 1500x100x50mm shall be engraved in the centre at the back with letter SDMC or as directed by Engineer-In-Charge, 2 planks of size 1500x100x50mm-and 1 plank of size 1500x200x50mm will be bolted to coupling nuts provided in the base support on both side with 2 number of 12mm dla and 65mm long galvanized steel CSK bolts and one Eva Washer for each bolt to form a seat;3 planks of size 1500x100x50mm will be bolted to coupling nuts provided in both the base support to form back rest with 6 nos. (Two Nos. In Each Plank) half threaded carriage bolts and nuts of size 165m long and 8mm dia with Eva and steel washers. The holes visible at the back side of the bencli will be sealed with cement mortar after assembling. Side edges of all the planks shall be painted with acrylic bases paint of approved colour and shade and front portion of seating and back rest planks shall be polished to give glossy linist complete as per direction of Engineer-in-charge |
| 12 | Providing & fixing of Name Board made of MS sheet 90X60cm. 1mm thick with frame of MS angle 50X50X6mm to diagonal braces at the back of the sheet of MS flat 40X6mm, total height of the board above ground level 2.40 m, length of legs below ground 0.30m embedded in CC block 1:2:4 (1cement : 2 coarse sand : 4 graded stone agg. 20mm nominal size) 30X30X15 cm. including excavation and removal of surplus earth within 50m. lead Applying priming coat of approved steel primer, painting with synthetic enamel paint of approved quality and lettering with enamel paint of approved color (one side) as per drawing / direction of officer in-charge. |
| 13 | Supply And Fixing Of Double Arch Swing.Leg Support :80 Mm Nb Pipe. Seat- Anti Skid Rubber Belt. Bearing : Heavy Duty Ball Bearing. Area : 6.0 M X 1.5 M. Height : 2.6 M. Top Bar :50 Mm Nb Pipe. Suspension: 6 Mm Rubber Coated Chain. In This One Child Can Enjoy The Swing At One Time. The Arch Shaped Side Frame Shall Be Made Of 80mm Nb B Class Gi Pipe Shall Be Made Up Of 50mm Nb B Class Gi Pipe. The Frame Shall Be Powder Coated To Give An Aesthetic Look. The Swing Shall Be Made Up Of 10mm Thick Anti Skid Rubber Top The Rubber Belt Seat/ U Shape Swing Seat With 2 Eye Bolt Tyb-S06. Made Of Polyurethane Of Size：53 X 20.5 X 20 Shall Be Suspended On 6mm Rubber Coated Gi Chair. The Bail Bearings Shall Be Mounted Inside A Specially Designed Nylon Clamp. Powder Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size) (As Per Direction Of Officer In Charge.) |
| 14 | Supply And Fixing Of Wave Slide.Ladder-Frame- 25m M N B Pipe. Handrail - 20 Mm N B Pipe. Centre Support- 50 Mm N B Pipe. Area : 0.5 M X3.5 M. Platform Height : 2.1 M. Chute Frp. The Topcoat Is Done Using The Best Quality Brand Or Duly Powder Coated. The Wave Slide Chute Shall Be Made Up Of 4mm Thick Frp / Lldpe Materials. The Structure Shall Comprise Of 20 And 25 Mm Nb Bclass Gi Pipes. The Center Support Shall Be Made In 90mm Nb B Class Gi Pipe. The Ladder Cum Railing Shall Be Made 20mm And 25mm Nb B Class Gi Pipes. The Platform Shall Be Made Up Of 14 Swg Gi Sheet With Anti Skid For Firm Foot Grip. There Shall Be Triangular Steps 16 Swg Gi Sheet. The Chute Shall Have Its End Such As It Causes Safe Landing Of The Child. The Pipes Shall Be Powder Coated Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size) (As Per Direction Of Officer In Charge.) |
| 15 | Supply And Fixing Of Animal Merry Go Round.Area : Ø 1.5 M. Height – 0.8 M. Seat – Roto Moulded Pvc Animal Shape. Main Frame: 40nb G.I.Pipe. Bearing: Heavi Duty Bearing. Ms Plate: 250x10mm. Support Pipe- 80nb. The Topcoat Is Duly Powder Coated. The Main Frame Of The Animal Merry Go Round Shall Be Made Up Of 25 & 40 Nb B Class Gi Pipes. The Stand Shall Be Made In 80 Nb B Class Gi Pipe. The Whole Structure Shall Be Mounted On Heavy Duty Bearing Shaft Permanently Lubricated With Water Sealant. The Animal Shall Be Made Out Of Frp (Fibre Reinforced Plastic)/Lldpe (Low Linear Density Poly Ethylene). It Shall Accommodate 4 Children At A Time. The Pipes Shall Be Powder Coated To Prevent Rusting. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement: 2 Coarse Sand: 4 Stone Agg. 20mm Nominal Size) (As Per Direction Of Officer In Charge.) Please Enable Macros to View BoQ information |
