|
| 1 | Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet). SI No.692 |
| 2 | Earth work in excavation in foul position soil lead 50mt.& lift 1.5 mt. incl. lab. T&P etc all complete. |
| 3 | P/L of base concrete in 1:6:12 with cement, L-Sand and 40mm S/B including mat. Lab. T&P,etc all complete. |
| 4 | M 150 class brick work in 1:4 with cement &approved Course Sand mortar including supply all material and S.I.N. labor etc. SIN 305A |
| 5 | 12mm thick cement plaster in 1:4 cement mortor with 1 cement and 4 course sand including etc. all complete of work. |
| 6 | P/A palster of paris putty of 2mm thickness over plasterd surface etc. DSR 13.26 |
| 7 | Finishing walls with textured exterior paint of required shade New work (Two or more coats applied 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm DSR2023/13.45.1 |
| 8 | R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (S.I No-289) |
| 9 | M.S. (Tor steel or plain) in plain work such as R.C.C or R.B work Including bending for proper shape as necessary including bending for proper completion of the work and Including supply of all steel & wastage, bend, hooks, and authorised overlapping shall be measured. (S.I-504) |
| 10 | E/W filling with cartage upto 10km I distance including dreacsing lavaling etc. |
| 11 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).DSR2023/16.69 for path way |
| 12 | Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out complete. New work (Two or more coats) DSR/2023 16.47.1 |
| 13 | Brick solling with straight over burnt brick laid flat and dry including all complete all complete the work. for path way |
| 14 | S/L of GSB 53-9.5mm thick S/B upto 10 cm loose layer including etc all complete of work. |
| 15 | Consolidation of GSB upto 10 cm loose layer including etc all complete of work. |
| 16 | Water allowance to be allowed on above i/c including all complete of work. |
| 17 | Providing & Laying of 80mm thick coloured Hexagonal 30Mpa interlocking files including all complete of work as per MORD specification No.1500 |
| 18 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge As per M/R |
| 19 | Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone. DSR2023/16.86.1 |
| 20 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding. grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, l/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).DSR2023-10.28 |
| 21 | S/F of fountain including all complete at site.as per M/R |
| 22 | Supply and fixing of decorative 8 to 16 watt led bollard luminaire with driver set conferming to IP 65 protection complete in all respect. UP PWD Electrical SOR SI No.1442 |
| 23 | P/F Baricating of road including supply of materials etc. all complete of work. |
| 24 | Deduction cost of dismental materials - Old brick |
| 25 | Deduction cost of dismental materials - Old brick bats. |
| 26 | Swing four seater MGR PGMR 50 pagen no 151 |
| 27 | Multiseater sea saw PGSS page no 155 |
| 28 | Bench VIP Bench PGGD 46 Page NO 173 Please Enable Macros to View BoQ information |
