|
| 1 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10 |
| 2 | Kitchen sink without drain board |
| 3 | 610x460 mm bowl depth 200 mm DSR 17.10.2.2 |
| 4 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : DSR 17.13 |
| 5 | Orissa pattern W.C. pan of size 580x440 mm DSR 17.13.2 |
| 6 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete DSR 17.19 |
| 7 | 10 litre ( flush) capacity-white DSR 17.19.1 |
| 8 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.DSR 17.15 |
| 9 | Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto1 Mtr long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16.A |
| 10 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete DSR 17.20 |
| 11 | White solid plastic seat with lid |
| 12 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings DSR 17.25 |
| 13 | Flat back wash basin of size 550x400 mm DSR 17.25.2 |
| 14 | Providing and fixing soil, waste and vent pipes : DSR 17.35 |
| 15 | 100 mm dia DSR 17.35.1.2 |
| 16 | 75 mm dia DSR 17.35.2.2 |
| 17 | Providing and fixing heel rest sanitary bend DSR 17.40 |
| 18 | 100 mm DSR 17.40.1.2 |
| 19 | 75 mm DSR 17.40.2.2 |
| 20 | Providing and fixing collar: DSR 17.57 |
| 21 | 100 mm DSR 17.57.1.2 |
| 22 | 75 mm DSR 17.57.2.2 |
| 23 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR 17.60 |
| 24 | 100 mm inlet and 75 mm outlet DSR 17.60.2 |
| 25 | Sand cast iron S&S as per IS : 3989 DSR 17.60.2.1 |
| 26 | Providing & fixing G.I.pipes complete with G.I. fittings , clamps, i/c cutting and making good the walls etc. DSR 18.10 |
| 27 | 15 mm dia nominal bore DSR 18.10.1 |
| 28 | 20 mm dia nominal bore DSR 18.10.2 |
| 29 | Providing & fixing Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall DSR 18.11 |
| 30 | 15 mm dia nominal bore DSR 18.11.1 |
| 31 | 20 mm dia nominal bore DSR 18.11.2 |
| 32 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR 18.17 |
| 33 | 20 mm nominal bore DSR 18.17.1A |
| 34 | 15 mm nominal bore (NSR ) |
| 35 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : DSR 18.46 |
| 36 | 15 mm nominal bore DSR 18.46.1 |
| 37 | 20 mm nominal bore DSR 18.46.2 |
| 38 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 39 | Cutting holes up to 30x30 cm in walls including making good the same:DSR 18.76. |
| 40 | With common burnt clay F.P.S. (non modular) bricks |
| 41 | Cutting holes up to15x15cm in R.C.C. floors and roofs for passing drain pipe etc.and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 (1cement: 2 coarse sand:4graded stone aggregate20mm nominal size) including finishing complete so as to make it leak proof. DSR 18.77. |
| 42 | Providing and fixing 1 H.P. monoblock boosting pump including cost of fixing & fitting accessories, Head range 6 to 39 mtr, discharge 2880-750 LPH, CG Mjnisapphire or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 43 | Providing and fixing Hydro pneumatic pump of size 0.5 HP of approved make with pressure switch pressure gauge, accessories and making connection complete having discharge 2000 LPH at 6m head make Crompton or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 44 | Providing Drip Seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : |
| 45 | 100mm |
| 46 | Providing& Fixing CP Nozzel Tap any approved make complete in all respect |
| 47 | Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make |
| 48 | Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm |
| 49 | Providing and fixing of syphon fitting for low level flushing cistern |
| 50 | Providing and fixing of EWC Seat Cover of approved make |
| 51 | Conversion for OWC to EWC with 4\\" C.I.H.R bend, 4\\" PVC collar 1 No 4\\" PVC pipe of 4kg pressure upto 1'-6\\" long including dismantling of OWC pan and floor and repair of flooring to its original complete in all respect . Please Enable Macros to View BoQ information |
