|
| 1 | Finishing walls with Acrylic Smooth exterior paint of required shade: |
| 2 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 3 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. |
| 4 | Two or more coats on new work |
| 5 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 6 | Two coats |
| 7 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall |
| 8 | 20 mm nominal dia Pipes |
| 9 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 10 | 25 mm nominal dia Pipes |
| 11 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work |
| 12 | 50 mm dia nominal bore |
| 13 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 14 | 25 to 40 mm nominal bore |
| 15 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 16 | 45 cm lengthi) 15 mm nominal bore |
| 17 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 18 | 100 mm diameter |
| 19 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 20 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 21 | 15 mm nominal bore |
| 22 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 23 | 15 mm nominal bore |
| 24 | Providing and fixing C.P. Angular cock of approved quality and colour. |
| 25 | 15mm nominal bore. |
| 26 | Providing and fixing C.P. brass stop cock of approved quality. |
| 27 | 15mm nominal bore. |
| 28 | Providing and fixing CPVC Tank Nipple (Tank Connector pipe) for water tank pipe, fittings of approved quality and colour. |
| 29 | 25mm nominal bore |
| 30 | Providing and fixing CPVC Ball Valve of approved quality High or low pressure with plastic floats complete |
| 31 | 25mm nominal bore |
| 32 | Construction of 5.80m ht Steel Staging with double Platforms each of Size 3.00X1.60m whole unit provided with 06Nos of RCC Short Column base (300mm x 300mm size) with foundation footing for each and foundation depth of 1.20 Mtr with short column raised to 150mm above G.L and erecting Pre- fabricated staging over the short column base by means of base bearing plates & Foundation bolts. etc complete., Including Pre-Fabrication of 01 nos of Steel Staging with double platforms each of size 3.00m Length & 1.60m width & each platform welded over with 20Gauge thick GI Sheet and staging frame consisting of 06nos of 65dia GI Pipes in vertical posts and 50mm dia GI Pipes in horizontal tie members & 40mm dia GI Pipes in cross bracings provided as required in all of its four sides & 50dia GI Pipe in outer frame of each top platforms with 32mm dia GI pipes in its intermediate spaced @ 150c/c , complete unit made out of GI pipes and painted with black anti corrosive bitumastic paint of all complete as per enclosed detailed drawing sketch & direction of EIC. |
| 33 | Providing and Fixing steel Ladder of overall length 6.00mtr & 0.50mtr width (outer to outer) consisting of 50dia GI Pipes as the vertical rail members & 32mm dia GI pipes as the intermediate rungs spaced @ 300c/c i/c fixing the same to the steel staging in a required position and painted with black anti corrosive bitumastic paint of all complete as per enclosed detailed drawing sketch & direction of EIC. Please Enable Macros to View BoQ information |
