Tender For Supply, Installation, Testing and Commissioning Of New Lift Of Suitable Capacity In Replacement Of The Existing Old Lift In Existing Lift Well And Allied Electrical Installation Work At (G+10)-Storied Academic Building Within Alipore C Us
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Jul 2026
7 days left
EMD
52260
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alipore → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation, Testing and Commissioning Of New Lift Of Suitable Capacity In Replacement Of The Existing Old Lift In Existing Lift Well And Allied Electrical Installation Work At (G+10)-Storied Academic Building Within Alipore C Us Of University Of Calcutta. ---S.I.T.C Of New Lift.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-Jul-2026 | 1st Corrigendum Notice in respect of extension of date | Date | 17-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | SITC of new Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to relevant IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd. Before installation of new Lift, the existing old Lift installation is to be dismantled and kept in safe/proper place as per direction of E.I.C/Authority |
| 2 | Make : Lift manufacturers approved under category-I (as per Memorandum of PWD/Govt. of W.B vide memo no. 75-W(C)/1M-20/15 dt. 03/03/2015) |
| 3 | Type: Passanger Lift . |
| 4 | Load : 15 Passenger / 1020 Kg |
| 5 | Control: Microprocessor based with AC variable voltage & variable frequency ( VVVF) |
| 6 | Machine:- Energy efficient machine, Gearless, without Machine Room |
| 7 | Position of Machine Room: MRL |
| 8 | Speed: 1.75 Mtrs./ Sec |
| 9 | Floor served: G +10 |
| 10 | Landing: 11, all on same side |
| 11 | Total Rise : 34 Mtr(approx.) [subject to actual site verification] |
| 12 | Operation: Microprocessor based simplex full collective with or without attendant. |
| 13 | Signals: Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator.COP & LOP must have stainless steel face plate silver brushed with surface mounted button.Button : All buttons on car & landing shall be luminous, on/off switch for Lift, fan, light, toggle switch or key switch for automatic/attendent mode of operation. Display type :Colour LCD / Segmented LCD/LED.Operation Push Button for lift maintenance & service should be on top of the car. |
| 14 | Leveling accuracy:± 5 mm(Micro levelling arrangement ) |
| 15 | Car inside : 1600mm wide x 1500mm deep x 2200 mm height and & depth suitable for 15-Passenger Lift as per relvant NBC code or OEM standard. |
| 16 | Car Entrance:Clear Opening:- 1000 mm (W) x 2000 mm (H ) protected with car door or as per OEM standard. |
| 17 | Car Finish & Enclosure: Stainless Steel sheet (20 SWG) with Hairline finish with hand rail. |
| 18 | a) Rear Mid Panel ---- Stainless Steel sheet (20 SWG) with Hairline finish (#4) |
| 19 | b) Rare corner Panel--- Stainless Steel sheet (20 SWG) with Hairline finish (#4) |
| 20 | c) Side Mid Panel--- Stainless Steel sheet (20 SWG) with Hairline finish (#4) |
| 21 | d) Side corner Panel--- Stainless Steel sheet (20 SWG) with Hairline finish (#4) |
| 22 | e) Front Panel--- Stainless Steel sheet (20 SWG) with Hairline finish (#4) |
| 23 | Car Ceiling & Lighting: Stainless Steel with hairline finish (#4) with LED lighting and Fan |
| 24 | Car Ventilation: Cross flow Pressure fan with anodised aluminium grill. |
| 25 | Car Flooring : Decorative granite flooring (As per direcion of EIC and according to this Department's Order). |
| 26 | Car Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system with 2D infrared curtain of light and mechanical force limiting device,with fire rating of minimum 120 minutes. |
| 27 | Landing Door: Stainless steel centre opening automatic door provided with V3F controlled door drive system, with fire rating of minimum 120 minutes. |
| 28 | Door Opening: Automatic power oprated door with full length Photocell assembly light curtain sensor |
| 29 | PROTECTIVE DEVICES & OTHER ACESSORIES |
| 30 | ARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others. |
| 31 | Overload Protection:Fully loaded with overload protection.On overloading the lift car will not start with door remaining open and give audio display indication |
| 32 | Emergency lighting in car: Battery operated emergency lighting in the lift car. |
| 33 | Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room |
| 34 | Emergency Alarm: Battery operated alarm bell system in lift car and control room |
| 35 | Fireman switch: Fireman switch at main landing terminal. |
| 36 | Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. |
| 37 | Main rope - As per manufacturer's standard conforming to respective applicable IS |
| 38 | Hand Rail:-Stainless Steel Mirror Finish Handrails on rear car panels |
| 39 | Auto fan cut-off |
| 40 | DIMENSION OF SHAFT & POWER SUPPLY |
| 41 | Available Shaft Dimension: 2567 mm width X 1958 mm or as per actual site condition [the Bidder should visit the site] |
| 42 | Available Pit Depth :1600 mm or as per actual site condition [the Bidder should visit the site] |
| 43 | Available Overhead : 5100 mm or as per actual site condition [the Bidder should visit the site] |
| 44 | Electric power supply: AC 415 Volt 3phase, 50 Hz, terminated in machine room as per IS |
| 45 | N.B. Rates should be quoted with minor civil works, wall cutting and mending good the damages to the original finish. |
| 46 | Less(-) Cost for dismantled unserviceable materials (incl. D.C. Motor) . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender