|
| 1 | S/E of LED 10W bulk head LED Light Cat No. WT202W NW PSU S2 PC I/C erection of fitting in wall/ ceiling and making necessary connection to complete the job with all labour and petty material as required. |
| 2 | PROVIDING AND FIXING STAINLESS STEEL TOWEL RING JAQUAR CAT NO. AQN-7721 COMPLETE WITH BRACKETS FIXED TO WOODEN CLEATS WITH SS BRASS SCREWS WITH CONCEALED FITTINGS ARRANGEMENT OF APPROVED QUALITY AND COLOUR etc. |
| 3 | PROVIDING AND FIXING SQUARE - MOUTH PVC GULLY TRAP OF SIZE 160 X 110 MM COMPLETE WITH BRICK MASONRY CHAMBER WITH WATER TIGHT C.I. COVER WITH FRAME OF 300X300 MM SIZE (INSIDE) THE WEIGHT OF COVER TO BE NOT LESS THAN 4.50 KG AND FRAME TO BE NOT LESS THAN 2 |
| 4 | PROVIDING AND FIXING IN POSITION UPVC SWR SPECIALS FOR SOIL WATER VENT OR ANTI SYPHONAGE PIPES (SUPREME OR APPROVED EQUIVALENT ) AS PER IS - 13592 INCLUDING CUTTING, JOINTING WITH APPROVE SOLVENT , RUBBER RING ETC AND OTHER ACCESSORIES INCLUDING CEMENT COMPO FOR 110MM O/D PIPE LINE (PLAIN BEND) ETC |
| 5 | PROVIDING AND FIXING IN POSITION UPVC SWR SPECIALS FOR SOIL WATER VENT OR ANTI SYPHONAGE PIPES (SUPREME OR APPROVED EQUIVALENT ) AS PER IS - 13592 INCLUDING CUTTING, JOINTING WITH APPROVE SOLVENT , RUBBER RING ETC AND OTHER ACCESSORIES INCLUDING CEMENT COMPO FOR 110MM O/D PIPE LINE (P-TRAP) ETC |
| 6 | PROVIDING AND FIXING IN POSITION UPVC SWR SPECIALS FOR SOIL WATER VENT OR ANTI SYPHONAGE PIPES (SUPREME OR APPROVED EQUIVALENT ) AS PER IS - 13592 INCLUDING CUTTING, JOINTING WITH APPROVE SOLVENT , RUBBER RING ETC AND OTHER ACCESSORIES INCLUDING CEMENT COMPO FOR 110MM O/D PIPE LINE (CLEAN OUT) etc |
| 7 | PROVIDING AND FIXING UPVC FLOOR TRAP FOR SOIL WATER VENT OR ANTI SYPHONAGE PIPES (SUPREME OR APPROVED EQUIVALENT ) AS PER IS - 13592 AND IS-14735 INCLUDING CUTTING, WASTAGE ETC AND CUTTING HOLES IN WALLS ROOFS OR FLOORS ETC AND MAKING GOOD IN ORIGIN. etc |
| 8 | S/E of LED 12W LED downlighter DN296B LED12S-6500 PSU WH square/ round surface recess mounting white colour of Phillips make working hour minimum 35000 hours, operation on single phase AC supply complete in all respect upto he entire satisfaction of Engineer- in -charge of the work including making necessary connections etc.. |
| 9 | S/E of LED Panel of 36 W surface/ recess mounting size 2`x2` cat no RC380B LED36S-6500 G5 L60W60 PSU OD of Phillips make with energy efficient white colour working hour minimum 50000 hours, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc.. |
| 10 | Supply and erection of Concealed light CAT No. DN092B LED10S-6500 PSU WH of Philips Make and all petty materials required to complete the job in all respects of Philips / Wipro / Bajaj make as approved by the Engineer in charge. ETC |
| 11 | Supply and Erection of surface mounting LED Batten fitting 1 x 18/20 watt (4 feet long ),CAT NO. BN021LED 125 6500 PSU GR HSN CODE 9405 white colour of Phillip make, made of high grade poly carbonate body working hour minimum 50000 hours, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc... |
| 12 | IncomerPANELS:1 Nos. 125A 4P MCCB with built in thermal magnetic release (Ics = Icu = 25kA)with inbuilt O/L , S/C and E/F protection as per specification and each with followingaccessories.1Set of R,Y,B phase indication lamps with control MCB as per fault requirement foreach Incomer.Busbars3Nos. SPN copper insulated bus bars link of minimum of 160AmpsOUTGOINGS1Nos. 25A FP MCB2Nos. 40A FP MCB1Nos. 63A FP MCB1 Nos. 6-32A, DP MCB 10kA `C` Curve3 no`s Neutral and earth link ( one for each face ) |
| 13 | Extra Cost for Glass Door Accessories i.e Pull Handle TGDIH ( 25mm dia X 450mm long ) H-Type Pull handle back to back with 350mm CTC, adjustable fixing for glass ,Length =450mm, 25mm dia, -SS304 Finish: mill , . spindle and cover plate ,US 10 Std. Corner lock plus Strike plate and EPC. As per DIN EN 1154.(500,000 cyle tested ) , Finish: Satin stainless steel. Floor stop half dome with 45mm dia with fixing accessories, in satin Chrome ,Final certifications of products should be submitted be from the product manufacturer for the originality of the product and manufacturer should be have its own service team . The above work complete in all respect as per approved drawings and to the satisfaction of Architect /Engineer-in-Charge. |
| 14 | Providing and fixing of approved make translucent, cast PVC, self - adhesive vinyl, special CRYSTAL-effect film to reproduce Sand - blasting effect on glass at required locations as per the direction of Engineer-In-Charge complete.a) Plain Frosted film |
| 15 | PROVIDING AND FIXING HEAVY CLASS SS GRATING OF APPROVED DESIGN CAT NO cct-r-101 |
| 16 | PROVIDING AND FIXING SOAP DISPENSER WITH GLASS BOTTLE CAT NO ACN-1135N |
| 17 | Providing and applying at all floors, heights and locations exterior based texture of heritage/spectrum make made from natural stone based materials and bonding agent made from pure acrylic co-polymer emulsion, Broad fungicide and Bonding agent mixed to a recommended quantity of water and applied with a trowels on to the surface, to be finished, in an average uniform coat of 2mm covering an area of about 0.5 sqm/kg of the mix. giving a uniform surface texture applied by a trained flakes applicators in a single coat. The finish shall be anti fading and non pigmented type with resistance to weathering. |
| 18 | Providing and fixing in position UPVC SWR specials for soil waste vent or anti syphonage pipes (Supreme or approved equivalent ) as per IS -13592 including cutting and jointing with approved solvent as per the direction of Engineer incharge - H.R.B. |
| 19 | Providing and fixing urinal partitions of standard dimensions made of 10mm thick toughened frosted Glass, scratch and impact resistant. The urinal partitions shall be fixed on walls with right angle brackets in stainless steel of grade SS 304 with necessary fittings (Jaguar Cat no.-JSE-CHR-810US450X or approved equivalent) a) Urinal partition of size 900mm X 450mm |
| 20 | PROVIDING AND FIXING IN POSITION HINDWARE/Kohler/Jaguar MAKE Star white Viterous Chinaware Urinal of Hindware having in compatibility with Cat no.- URS-WHT-13261 of Hindware (Jaguar/Parryware) with stainless Steel flush pipe, spreads, domed waste coupler and concealed urinal self closing cock having in compatibility with Cat no.F310003ACP of Hindware(Jaguar/Kohlar) and PVC waste pipe etc. with all OTHER NECESSARY Fittings and making good the walls and floor. |
| 21 | Supplying, errection, testing and commissioning of 2BHP motor monoblock water pump set with complete fittings etc. in Fatehabad distt. |
| 22 | Item Description |
| 23 | DNIT for the work :- Construction of XEN OP Office Building Dabwali (Sirsa). Please Enable Macros to View BoQ information |
