|
| 1 | Supply of portable dewatering submersible pump set for dewatering muddy water, containing sand, silt etc. of capacity 5 HP having discharge of 500-600 LPM at 16-18 mtrs. Head, Delivery size 50 mm suitable for 415 volt, 3 phases, 50HZ A.C Supply along with 05 mtrs., waterproof cable. (Make- SU/Mody / KBL/ DJB approved. |
| 2 | Supply of control panel with ON-Off arrangement in sheet metal enclosure suitable for 5 HP pump set comprising of Ampere meter, voltmeter, DOL starter, indicating lamps, single phase protection, oveload relay duly fixed along with control wiring etc. Make:- C&S/L&T/Mody/DJB Approved. |
| 3 | S/O GI Pipes 50 mm dia size medium class with GI Flange Welded in both sides 3 mtr long with MS strips complete with threading work on each side of pipe each flange should be 4 holes and cut for cables. Make:- Jindal/TATA/DJB approved. |
| 4 | Complete clamping/holding the pump set and pipe with suitable clamp along with nut and bolts and washers for holding the 50 mm dia pipe for seprate suction & delivery of both pumps including bending and shaping etc.as required. |
| 5 | S/o Gun metal gate valve of 50 mm dia. Make:Skope/MARCK/ DJB approved. |
| 6 | Providing of 50 mm dia. CI D/F non return valve of size 50mm dia., as per IS 5312, PN 1.0 CI Body, Door/Bronze to Rubber rings/SS410 Twin Pin. Make: IVC/Kirloskar/Skope/DJB Approved. |
| 7 | S/O required off size threaded nut-bolts of good quality I.S.I |
| 8 | S/o CI Sluice Valves non rising with SS spindle ISI PN 1.0 IS 14846 flanged end of following sizes. 50 mm |
| 9 | 150 mm |
| 10 | Supply of Change over switch 320 Amp, 4 pole, 415 Volts, Confirms to IEC: 60974-III/IS:13974-II Make:- Havells/ABB/ DJB Approved |
| 11 | Supply of PVC Insulated un armoured single core flexible copper cable for working volatage up to 1.1 KV as per IS:694/2010 of size 35 sq.mm2. Make Grandlay/Havells/Gloseter/DJB Approved. |
| 12 | S/o Neoprene rubber packing of good quality having 50% neoprene Make: Jyoti / DJB approved. |
| 13 | Making of pit for installation of submersible p/set with the help of pneumatic hammer/ mannual labour, Breaking of RCC pit by power hammer & manual labour includes, removing /cleaning, Filling/strengthening of CC structure of pit installation. i/c with all civil work as required for installation of two nos pump set in each pit. |
| 14 | Installation of submersible p/set, in pit with suitable arrangement of all Electrical items i/c panel &Earthing of all equipment like p/set & panel etc., all piping work, fixing of valves and accessories executing minor civil works, making electrical connections with cable as required size, taking all safety measures all tool and tackles required. |
| 15 | Installation testing and commissioning of all E&M equipment at No load and full load conditions as per standard with full satisfaction of Engineer-In-Charge. This is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. Please Enable Macros to View BoQ information |
