|
| 1 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each complete all as specified and as directed. |
| 2 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and as directed. |
| 3 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed. |
| 4 | Taking down steel / wooden window and ventilator complete all as specified and as directed. |
| 5 | S&F factory made box type steel window with hung shutters both glazed and guaged shutter frame 60 x 25 mm ERW hollow 'P' section with wall thickness not less than 1 mm fixed to pressed steel frame 120 mm x 70 mm x 1.6 mm thick including fixing glazed portion, iron grills 8 mm squre MS Bar hunges with steel handle and fittingss lugs, tower bolt and steel peg stay etc complete with glazing bars, devotailed or welded complete with cooler opening all as specified complete all as directed by Engineer-in-Charge. Ref CEJZ Drg No TD/2004/93 sheet No 1 /3 to 3/3 |
| 6 | S&F factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified |
| 7 | S&F Pressed steel frame for doors of size 125 X 60mm frabicated out & 1.25 mm thick sheet with one or more rebates including necessary fixing lungs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed. |
| 8 | S&F Pressed steel frame for doors of size 105 X 60mm fabricated out & 1.25mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed. |
| 9 | M&L for cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in bed blocks for fixing hold fasts and fillling of frames etc. complete all as specified and as directed. |
| 10 | S&F 30 mm thick, factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 11 | S&F 35 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed. |
| 12 | M&L for Factory made single extruded WPC (Wood Polymer composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm (single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as per directed of Engineer-in-Charge. Note: WPC solid door/window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 13 | S&F factory made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and as directed. |
| 14 | S&F in repair steel rolling shutters, without ball bearing as specified including top cover, anchoring rod, hasp & staple, erected in position as indicated complete, gear operated type with chain wheel & hand chain thickness of laths 1.25 mm complete all as specified & directed. |
| 15 | S & F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, with or without coolar opening, complete with glazing bars, dovetailed or welded complete all as specified and as directed. |
| 16 | All as above but without glazing bars complete all as specified and as directed. |
| 17 | S&F in repair mild steel framed work such as in Mild Steel gate, grills, gratings, MS sheet etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified & directed. |
| 18 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete as specified and as directed. |
| 19 | S&F SS hinges medium weight size 100 mm, complete all as specified and as directed. |
| 20 | S&F mild steel pressed handle oval type stove enamelled of 150 mm size complete all as specified and as directed. |
| 21 | S&F mild steel barel tower bolts, stove enamelled black 200 mm with bright bolts and fixed complete all as specified and as directed. |
| 22 | S&F 300 mm mild steel sliding door bolt plate type stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate fixed complete all as specified and as directed. |
| 23 | S & F floor door stopper of 150 mm size, aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as directed. |
| 24 | S&F in repair mild steel mortice lock vertical type100 mm size 4-lever with two keys complete all as specified and as directed. |
| 25 | S & F in repair aluminium extruded section door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed. |
| 26 | S&F in repair 25 mm dia stainless steel tubular drapery rod cut to size and fixed in position including fixing brackets stop roller end caps etc complete all as specified and as directed. |
| 27 | S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete as specified and as directed. |
| 28 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or from metal frame or stone or concrete or bricks surrounds glazed with putty, taking out old pins punching or drilling out, complete all as specified and as directed. |
| 29 | S&F 4 mm thick sheet glass, ordinary quality and glazing with Putty/wooden beading in square n exc. 0.5 square metre in each pane complete as specified and as directed. |
| 30 | M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer complete as specified and as directed. |
| 31 | M&L for prepration of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 32 | M&L in repair for Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with requiredEPDM rubber/ neoprene gask etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainlesssteel screws, all completeEngineer-in-Charge. |
| 33 | M&L in repair for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around theopening, all complete as per requirement and direction of Engineer in-charge. |
| 34 | M&L in repair for powder coated anodised aluminium door shutters, (powder coating shall not be less than 50 microns of approved colour) aluminium section weighing exc. 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, powder coated aluminium fittings such as Alu handles -150 mm long -2 Nos in each door, SS hinges -100 mm long -4.0 No.s in each door, tower bolt of 200 mm length -2.00 No.s, anodised aluminum snap beading screws etc. complete all as specified. |
| 35 | M&L in repair for powder coated aluminium window and ventilator shutters (powder coating shall not be less than 50 microns of approved colour) sliding type / side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays, hinges type B-21, suitable handle and tower bolt complete all as specified and as directed. |
| 36 | S&F 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beading exc. 0.5 square metre in each pane complete all as specified and as directed. |
| 37 | S&F in repair 18 mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations and cover fillet complete all as specified and as directed. |
| 38 | S&F 100 mm Hasp and staple, aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 39 | Resecuring or easing and adjusting door shutter of any description exc 1.50 Sqm but n. exc 4.00 Sqm each by repairing locking arrangement, floor spring, bottom and top pivot etc. to make the shutter smooth functional of shutter complete all as specified and as directed. |
| 40 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 41 | S&F in repair Aluminium Door seal of overal size 42 mm having nylon brush of 20 mm fixed on aluminium body strip of 22 mm, fixed with screw on Aluminium door, wooden shutters or PVC shutters complete all as specified and as directed. |
| 42 | Dismantling boarding as in kitchen cabinet, cup boards/shelfs/partitions in any position fixed with screws complete all as specified and as directed. |
| 43 | S&F 18 mm thick WPC board one side laminated and other side balance white as on side of cupboard/Kitchen cabinet including shelves, partition drawer etc fixed as directed with solvent cement/adhesive and machine screws PVC edging/beading of size 18x1mm thick having density 600kg/per cum shall be provided on front visible edges of board complete all as specified and as directed. |
| 44 | S&F of Magnatic catcher (KTS-20) full extension load capacity 8 kgs suitable for cup board/kitchen cabinet shutter complete all as specified and as directed. |
| 45 | S&F of repair stainless steel handles, cast type polished bright of 100 mm size for kitchen cabinet shutters complete all as specified and as directed. |
| 46 | S&F 0 degree clip type self closing hinges for cabinets fixed with cadimum coated screws all as per sample. |
| 47 | Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets & snap grid frame work including hangers complete all as specified and as directed. |
| 48 | M&L for providing and fixing powder coated MS galvanised steel inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, fixed to angle iron truss with 2-3 mm GI wire with galvanised butterfly level clips for all hights complete all as specified and as directed. |
| 49 | M&L for 4 mm thick prepainted designer non-asbestos fibre cement building board and fixed on false ceiling grid complete all as specified and as directed by Engg.-in-charge. |
| 50 | S&F WPC louvered wall panel with thickness 12-25 mm inclusive of solvent cement and fixing at site inclusive of necessary frame work and solvent cement and fixed with PVC plug and screw and inserted to next panel groove edge and corners of all door window opening etc to be covered with pvc angle fixed at site as per specifications and drawing/ manufacture instruction complete all as specified and as directed. |
| 51 | S&F PVC wall panel hollow section thickness 10-12 mm inclusive of solvent cement and fixing at site inclusive of necessary frame work and solvent cement and fixed with PVC plug and screw and inserted to next panel groove edge and corners of all door window opening etc to be covered with pvc angle fixed at site as per specifications and drawing/ manufacture instruction complete all as specified and as directed. |
| 52 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises, compete all as specified and as directed. |
| 53 | M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed. |
| 54 | M&L for Glazed ceramic coloured tiles in vertical surface of size 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:4 complete all as specified and as directed. |
| 55 | M&L for coloured Ceramic tiles 10 mm thick (square/ rectagular) polished, area of each tiles not exceeding 0. 36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 a complete all as specified & directed. |
| 56 | All as above but as in vertical surface laid over and including 10 mm thick rendering in cement motar 1:3. complete all as specified and as directed. |
| 57 | M&L for Vitrified coloured tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed. |
| 58 | All as above but as in vertical surface laid over and including 10 mm thick rendering in cement motar 1:3. complete all as specified and as directed. |
| 59 | Demolition of stone slabs/tiles of any description or thickness in floors/apron etc laid bedded and pointed in any mortar complete all as specified and as directed. |
| 60 | M&L for 16-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillar, window cills, cooking platform and like laid over and including 10mm thick screed bed in cement mortar 1:4 and pointing in white cement (1:2) using marbal dust with admixture of pigment to match the shade of granite complete all as specified and as directed. |
| 61 | M&L for Machine cut kota stone size of (550 x 550)mm slab flooring 20-25mm thick laid over and including 20mm screed bedding in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 62 | M&L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar etc jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed. |
| 63 | Taking down cement plaster on brick or stone walls, concrete surface etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed. |
| 64 | M&L for rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 65 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even & fair complete all as specified and as directed. |
| 66 | M&L for rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of concrete surfaces as in ceiling including finishing the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 67 | M&L for prepration of newly plastered surface of walls providing 1mm thick wall care putty and applying two coat of distemper oil emulsion including over and including a coat of alklai resitant primer complete all as specified and as directed. |
| 68 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed. |
| 69 | M&L for preparation of new plastered or un plastered surfaces of wall including cornices, pilasters etc and applying two coat of cement based paint of approved colour on wall Surface including all necessary arrangement for execution of work, complete all as specified and as directed. |
| 70 | M&L for preparation of old plastered surfaces of walls and applying one or more coat of oil bound distemper complete all as specified and as directed. |
| 71 | S&F steel tubing ,galvanised, medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor including taking up or down 15 mm bore steel tubing and connections & disconnection of fittings complete all as specified and as directed. |
| 72 | S&F steel tubing ,galvanised, medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor including taking up or down 20 mm bore steel tubing and connections including disconnection of fittings complete all as specified and as directed. |
| 73 | S&F steel tubing ,galvanised, medium grade 25 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor including taking up or down 25 mm bore steel tubing and connections including disconnection of fittings complete all as specified and as directed. |
| 74 | Supplying and laying of 75 mm dia PVC pipes SWR fittings on walls / ceiling or laying in floors complete all as specified. |
| 75 | Supplying and laying of 110 mm dia PVC pipes SWR fittings on walls / ceiling or laying in floors complete all as specified. |
| 76 | S&F 75 mm bore PVC bends any radius /branch piece/ tee all as directed |
| 77 | S&F 110 mm bore PVC bends any radius /branch piece/ tee all as directed |
| 78 | S&F in repair 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) having monkey protection cover hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25 mm bore dia iron pipe complete all as specified and as directed. |
| 79 | S&F in repair 750 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) having monkey protection cover hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25 mm bore dia iron pipe complete all as specified and as directed. |
| 80 | S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm bore iron pipe and fixed. (Minimum weight 25mm - 455gms) complete all as specified and as directed. |
| 81 | S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20 mm bore iron pipe and fixed. (Minimum weight 25mm - 455gms) complete all as specified and as directed. |
| 82 | S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 83 | S&F in repair stainless steel kitchen plate rack overall minimum size 750mm X 600mmX250mm made out of 2mm thick stainless steel wire etc. complete all as specified and directed |
| 84 | S&F in repair bib taps, long body, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipes (Minimum weight - 450 gms) complete all as specified and as directed. |
| 85 | S&F in repair angular cock cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipes complete all as specified and as directed. |
| 86 | S&F in repair stop valves (concealed type) cast copper alloy, chromium plated, fancy type with long shank & cup, screwed down, screwed for 15 mm bore iron pipes (Minimum weight - 450 gms complete all as specified and as directed. |
| 87 | S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore dia iron pipe (Minimum weight - 500 gms) complete all as specified and as directed. |
| 88 | S&f in repair 2 way bib cock cast copper alloy chromium plated with wall flange, screwed for 15 mm bore dia iron pipe (Minimum weight - 450 gms) complete all as specified and as directed. |
| 89 | S&F in repair over head shower square/round shape, cast copper alloy, chromium plated, with 600 mm long arm complete all as specified and as directed. |
| 90 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with stainless steel bracket guard & railing 60cm long complete all as specified and as directed. |
| 91 | S&F in repairs stainless steel towel rail 600 mm long made out of 20mm stainless steel tube fixed with chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed. |
| 92 | S&F Towel Ring of stainless steel of standard size fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. |
| 93 | S&F in repair PVC nahani trap including stainless steel chromium plated Grating 100 mm dia complete all as specified and as directed. |
| 94 | S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete, complete all as specified and as directed. |
| 95 | S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm including bracket & 32mm bore polyethylene pipes & coupling, complete all as specified and as directed. |
| 96 | S&F in repair of Vitreous China Urinal, Half stall type of size (375x390x590), white including CP urinal spreader, suitable waste pipe complete all as specified and directed. |
| 97 | S&F in repair vitreous china wash down water closet (Pedestal pattern) white including suitable 'P' or 'S' trap and excluding (flushing cistern and flush pipe), complete all as specified and directed. |
| 98 | S&F PVC connection 15mm size with PTMT nut of length 600mm complete as specified and as directed. |
| 99 | S&F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. |
| 100 | S&F in repair stainless steel hand jet Health faucet with 8 mm dia 1.2m long SS flexible tube and wall hook complete all as specified and as directed. Please Enable Macros to View BoQ information |
