Tender For Provn Of 03 X Toilet Block Near Trg Area With Pathway At Sw Div And 01 X Toilet Block At Bgffr And 01 X Toilet Block At Trg Area Of Cr-Ii With Pathway At Pw Div At The Inf School, Mhow Under Ge (Mis) Mhow
Tender Value
40.87 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
4 days left
EMD
82000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GE (MIS) Mhow → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 03 X Toilet Block Near Trg Area With Pathway At Sw Div And 01 X Toilet Block At Bgffr And 01 X Toilet Block At Trg Area Of Cr-Ii With Pathway At Pw Div At The Inf School, Mhow Under Ge (Mis) Mhow
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Jun-2026 | BOQ Corrigendum | BOQ | 08-Jul-2026 |
| 2 | 27-Jun-2026 | Date Corrigendum | Date | 08-Jul-2026 |
| 3 | 08-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 3 | Earth work in excavation for all kind of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge |
| 4 | Add to item No-3 above for each additional 1.5 m or part thereof in depth beyond the first 1.5 m. |
| 5 | M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor, etc complete all as specified and directed |
| 6 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified and directed. |
| 7 | M&L for Mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia in strriups,spaces,nibs and binders complete all as specified and directed. |
| 8 | M & L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter finished fair complete all as specified and directed |
| 9 | M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
| 10 | Returing, filling in trenches, incl spreading, levelling, watering and well ramming in layers not exc 25 Cm in hard/dense soil complete all as specified and directed. |
| 11 | M&L sand filling under floor including waterring and consolidaion complete all as specified and directed. |
| 12 | Removing excavated material (soil) to a distance not. exc. 50 mtr and depositing where directed at a level nexc 1.5 mtr above the starting point. |
| 13 | M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions finished fair complete all as specified and directed |
| 14 | M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 15 | M&L fly ash brick work in CM ( 1:6 ) of modular size with straight or curved on plan exceeding 6.0mtr mean radius complete all as specified and directed. |
| 16 | M & L for use and waste of formwork to sides and soffits of floor or roof beam, beam hauchings, bands, girders, bressummers, lintels, etc for fair finish surfacecs complete all as specified and directed |
| 17 | M&L RCC M-25 (Nominal Mix) using 20 mm graded stone aggr as in beams, bands, cantilvers, bressummers, linters, chajjas, etc over 1.5m span etc complete all as specified and directed |
| 18 | M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping), etc For Fair Finish Surfacecomplete all as specified and directed. |
| 19 | M & L for use and waste of Timber Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed. |
| 20 | M&L RCC M-25 (design Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc complete all as specified and directed |
| 21 | M&L for moorum / red bajri filling in floors or pavings, laid in layers nexc 15cm thick, spread, levelled and rammed including waterring and consolidation complete all as specified and directed. |
| 22 | M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 23 | M & L 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) for levelling course in floors complete all as specified and directed. |
| 24 | M & L for 75mm thick cement concrete 1:3:6 type C1, with using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed. |
| 25 | M&L for rendering 10mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed. |
| 26 | M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and fair without using extra cement complete all as specified and directed.(Note:- Liquid water proofing compound to be measured paid separately) |
| 27 | M&L for rendering 5mm thick in ceiling CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 28 | S&F for factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed. |
| 29 | S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed. |
| 30 | S&F aluminium coloured power coated window and ventilator shutters, sliding type without sash bar alu section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all as specified and directed. |
| 31 | S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition incl necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed. |
| 32 | S&F for mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed. |
| 33 | M&L for applying two coats of 1st Quality oil emulsion distember over new prepared surface of wall with putty complete all as specified and directed. Note:- Putty shall be measured and paid seperately under relevant item) |
| 34 | M&L for preparation of new plastered surfaces of walls and applying two coat of Acrylic Smooth exterior paint of required shade (@ 1.67 ltr/10 sqm) over over a coat of primer(@ 2.20 kg/10 sqm) same make base over a coat of putty all as specified and directed.Note:- Putty shall be measured and paid seperately under relevant item) Make Asian- Apex or Equivalent. |
| 35 | M&L three coats of white washing on newly/Old plastered or concrete celling sufaces incuding preparation of surfaces. |
| 36 | M&L for preparation of newly plaster surface of wall and and apply 2mm thick cement base wall care putty in two coat (each coat not less than 1mm) over a coat of primer on walls and surface finished even and smooth with sand paper complete all as specified and directed |
| 37 | M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed. |
| 38 | M&L for glazed ceramic coloured tiles of size not less than 450x300x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed. |
| 39 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete complete all as specified and directed. |
| 40 | M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand complete all as specified and as directed. |
| 41 | M&L for Brushing with neat cement slurry @ 3 Kg per Sqm area mixed with integral water proofing compound as specified and directed (WPC shall be measured and paid separately under respective item). |
| 42 | M&L for rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing compound while concrete surface is green and finish the surface even and smooth without using extra cement all as specified and directed (WPC shall be measured and paid separately under respective item). |
| 43 | M&L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete. |
| 44 | M&L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat would be paid seperately.) |
| 45 | M&L 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.Note: Application of APP membrane must be done by authorised applicator of membrane manufacturer. |
| 46 | M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg / sqm each coat on water proofing treatment with preparation of surface as on non assesible area complete all as specified and directed. |
| 47 | Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as approved. |
| 48 | S&F Rotational moulded Polyethylene water storage tank 1000 liters capacity (cylidrical vertical with closed top) of two layer hoisted and fixed in position all as specified in SSR part I complete all as specified and as directed. |
| 49 | S&F 15mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,complete all as specified and as directed. |
| 50 | All as per item no 49 above but 20mm bore complete all as specified and as directed. |
| 51 | S&F CP pillar taps (swan neck type) cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed.Make-Plumber/Essco of jaguar(Economical Range) |
| 52 | S&F CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified .Make-Plumber/Essco of jaguar(Economical Range)and directed.. |
| 53 | S&F fancy type chromium plated15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed. Make-Plumber/Essco of jaguar(Economical Range) |
| 54 | S&F CP toilet paper holder complete all as specified and as directed. |
| 55 | S&F vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and as directed . |
| 56 | S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) |
| 57 | S&F PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified and directed. .Make-Plumber/Essco of jaguar(Economical Range) |
| 58 | S&F health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed..Make-Plumber/Essco of jaguar(Economical Range) |
| 59 | S&F vitreous china wash basin white (oval shaped under counter) of size 550 x 400mm including 32mm brass CP waste coupling complete all as specified and as directed . |
| 60 | S&F vitreous china urinal bowl urinal flat back, size of 465x355x265mm white (min)with grating and union for discharge pipe, urinal spreader with waste pipe and all fiting for urinal.complete all as specified and as directed |
| 61 | M&L CP Urinal spreader of any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 62 | S&F Urinal partition of Vitreous china urinal partition white of size 310x700 mm.complete all as specified and directed |
| 63 | S&F PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed. |
| 64 | S&F 5 mm thick glass mirror Size n Exc. 0.85 sqm of selected quality glass of fixed to wall surface with CP screw and CP washer ccomplete all as specified and directed. |
| 65 | S&F PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed. |
| 66 | S&F for 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed |
| 67 | S&F 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. |
| 68 | S&F 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 69 | S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 70 | S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 71 | S&F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 72 | S&F 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. |
| 73 | S&F 75 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 74 | S&F 75 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 75 | S&F for 40mm Bottle trap of CP having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed. |
| 76 | M&L for Extra for forming fiar finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds,mitred/stopped ends etc complete all as specified and directed. |
| 77 | S&F MS work as in doors or gates, water staging,Drain cover windows, ventilators of angle/rectangular or square hollow section or other section with gusset plates, rails,grill braces etc complete, drilled for fixing of steel sheeting or other covering doors, windows, ventilators etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, window, ventilator fittings and hanging, also fastening and fixing conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and as directed by Engr-in-Charge |
| 78 | Cutting into existing manhole for connecting new drains making good to pipe and rendering cutting out existing benching for and ternning branch channel (1/2 round as 3/3 section) in cement concrete type B-1 1:2:4 smoth finished and benching as required for 150 mm pipe complete all as specified and directed. |
| 79 | M&L for (SGSW) drain pipe of 150mm internal dia laid in trenches and jointed in cement mortar (1:1) complete all as specified and directed |
| 80 | M&L for DWCPE pipe of 180mm outer dia/ 163mm inner dia meter pipes including testing complete all as specified and directed |
| 81 | M&L for PCC (1:3:6) type C -2 as in concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested internal dia of pipe 150mm with specified bedding thickness, etc complete all as specified and directed . |
| 82 | M&L plain Cement concrete 1:4:8 D2 40mm graded aggregate in foundations, filling and mass concrete as directed by Engineer-incharge |
| 83 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:4., etc complete all as specified and directed. |
| 84 | M&L brick work with fly ash bricks in one brick thick honey combing walling built in CM 1:4 |
| 85 | M&L for Reinforced cement concrete (design mix )in M-20 in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 86 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 87 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cmwide |
| 88 | S&F TMT bar 10mm dia and over cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 89 | S&F TMT bar 6 to 8mm dia cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 90 | M&L for rendering 5mm thick in CM 1:4 on coincrete surfaces |
| 91 | S&F 100mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors |
| 92 | S&F 100 mm bore cast iron cowls |
| 93 | M&L for Plain cement concrete 1:2:4 Type B1 in foundations, filling and mass concrete |
| 94 | S&F 100mm SWG Single 'Y' junctions |
| 95 | Returning filling in, approved earth including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as sspecified and directed. |
| 96 | Removing excavated material exc. 1 km b not exc 1.5 km and depositing where directed |
| 97 | M&L for Preparing new surfaces and applying two coats of cement base paint on wall |
| 98 | Providing RCC precast ce- ment concrete 1;2:4 type B1 in cover slab set in cement mortor 1:4 |
| 99 | M&L for Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and directed. (Note:-Reinforcement to be measured separately). |
| 100 | M&L for 15 mm thick plaster in CM 1:4 on brick walls or concrete surfaces and in any position including finishing the surfaces fair and even (without using extra cement), complete all as specified and directed. |
| 101 | S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed. |
| 102 | M&L in for MS steel Hollow Section work in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified and as directed. |
| 103 | Preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete complete all as specified and as directed |
| 104 | M&L for machine cut kota stone slab in flooring 18-20mm thick laid over and including 15mm thick screed bed in cement mortar 1:6 and pointed with cement mixed with pigment to match with the shade of slab including rubbing and polishing complete all as specified |
| 105 | M & L for Point wiring with FR LS PVC insulated PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching disturbed surface of wall with existing surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping will be used) & 1.5 sqmm green FR LS PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including galvanised boxes and bakelite sheet for mounting switches, sockets, fan regulators etc for One light point/fan point controlled by one switch . Make of PVC conduit/Casing Caping:- Plaza/Finolex/Polycab/Kalinga/Jindal/Asian .(a) One light point controlled by one switch |
| 106 | (b) One Exhaust fan point controlled by one switch |
| 107 | (c) One 5amps socket out let point controlled by one switch on same board with other switches. |
| 108 | All as per item no-1 here in before but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch. |
| 109 | S & F for Modular Switch , single pole, one way, and 5/6 Amp single module complete all as specified. |
| 110 | S & F for Modular Switch , single pole, one way, and 15/16 Amp single module complete all as specified. |
| 111 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module complete all as specified. |
| 112 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module complete all as specified. |
| 113 | S&F ceiling rose surface bakelite three terminal complete all as directed. |
| 114 | Supply and fix integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or equivalent in Wipro |
| 115 | Supply and fix integrated LED tube light fitting 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square box complete all as specified and directed .Make:- Havells Cat No. LHEXBLP7IN1W009 Bajaj Cat Pt No. BCLSB 10 WH or equivalent in Wipro |
| 116 | Supply and fix LED street light fittings 1x35 Watt, 5700K complete fitting having pressure dia cast aluminium housing with heat resistant toughened glass & IP 65 /66protection fixed on and including sufficient length and appropriate size GI bracket with all accessories duly connection with three core flexible copper cable complete all as specified and directed .Make:- Havells Cat No.LHEXAYP7PN6K030 Crompton Cat No. LSTO-25-CDL, Bajaj Cat No. BCLST 25W LED IV2 |
| 117 | Supply and fix double door TPN DBs 4 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge. |
| 118 | S & F in repairs MCB TPN 40 to 100 amps 10 KA, c-series including connection with suitable size aluminium/copper lugs complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/HPL/Havells |
| 119 | S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. |
| 120 | Supply and fixing Exhaust fan 300mm sweep, AC single phase 230 Volts, metallic type, complete with louver including electric connection with suitable size copper conductor cable, clamps, nuts, bolts etc including making hole of appropriate size in the existing brick wall and making good the disturbed wall and matching with the existing surface of wall complete all as specified and directed by Engr-in-Charge. Make : Havells Model: Ventil Air-DX white or equivalent in /Bajaj/Crompton |
| 121 | Supply and fixing Exhaust fan 250mm sweep, AC single phase 230 Volts, non metallic type, complete with louver including electric connection with suitable size copper conductor cable, clamps, nuts, bolts etc including making hole of appropriate size in the existing brick wall and making good the disturbed wall and matching with the existing surface of wall complete all as specified and directed by Engr-in-Charge. Make : Havells Model: Ventil Air-DX white or equivalent in /Bajaj/Crompton |
| 122 | M & L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cmx 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.5 of MES SSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type c-1 with 40 mm thick RCC 1:2:4 type B-J cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion including taking down/dismantling the existing complete all as specified and directed. |
| 123 | Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of size 3.5 core x 35 Sqmm complete all as specified and directed |
| 124 | Supply and laying galvanised iron pipe 'light Grade' 50 mm in trenches , under floors, roads, along poles for protection of cables with all necessary fittings, including sealing ends complete all as specified and directed .Make Jindal/Prakash Surya/Tata |
| 125 | Excavation in trenches not exceeding 1.5 metre wide & not exceeding 1.5 meter in depth for foundation ,laying of cable or pipe ( where provide for protection of cable or fixing poles and stay and getting out in soft/loose soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed by Engr-in-charge. |
| 126 | Returning, filling in trenches in soft/loose soil in layers n.exc. 25 cm after laying of cables including spreading, levelling, and well ramming complete all as specified and directed. |
| 127 | Removing surplus excavated soil to a distance n.exc. 50 metre and depositing where directed at a level n.exc.1.5 metre high from the starting point. |
| 128 | M & L for Local sand cushioning with dry and clean sand over and under the under ground cable in trenches , ducts for cable protection complete all as specified. |
| 129 | Supplying and laying reinforced precast concrete cable cover, class LV, type 1 flat , size 250mm x 150mm x 40mm complete all as specified and as directed. |
| 130 | Cutting existing steel tubing for alterations oradditions complete all as specified and as directed |
| 131 | Supply and laying for galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed of following sizes :-.(a) 25 mm (2”) dia. |
| 132 | (b) 20 mm (3/4”) dia |
| 133 | S & F for gun metal gate valve with iron wheel head screwed both ends ISI marked fixed to GI pipe complete all as specified and as directed of following sizes :-(a) 25 mm (2”) dia |
| 134 | (b) 20 mm (3/4”) dia |
| 135 | M & L for Construction of brick masonry valves pits, of the following internal dimension complete with 3.15 mm thick MS sheet cover angle iron frame duly painted with locking arrangement including all necessary excavation and earth work PCC work complete.(a) 600 mm x 600 mm x 600 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 08, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 08, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 15, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender