Tender For Provn Of 06 X Sheds For Motor Cycle / Scooter Parking Near Bldg No P-128, P-129, P-130, P-152, P-153, P-163 (Jcos/ Or Md Accn) At Ii Line Under Ge Alipore, Kolkata.
Tender Value
37.86 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
0 days left
EMD
75728
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Garrison Engineer Alipore → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 06 X Sheds For Motor Cycle / Scooter Parking Near Bldg No P-128, P-129, P-130, P-152, P-153, P-163 (Jcos/ Or Md Accn) At Ii Line Under Ge Alipore, Kolkata.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Jun-2026 | BOQ corrigendum | BOQ | 07-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation in soft/loose soil not exceeding 30 cm deep and averaging 15cm deep and getting out complete all as specified and as directed. |
| 2 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and as directed. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 4 | Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 5 | Removing excavated materials to a distance exc 1.5 Km n.exc 5 Km and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and as directed. |
| 6 | M&L for PCC (1:2:4) type B2 (using 40 mm graded stone aggregates) for foundation / mass concrete complete all as specified and as directed. |
| 7 | S&F mild steel works for joist, channel, angle, or tee section, fixed independantly, without connecting plates, etc. as in fencing post conforming to Fe 410 W (gde E-250 quality B) complete all as specified and as directed. |
| 8 | S&F Steel work in tubular trusses, posts, purlin, struss, rafter etc including special shaped washers etc. complete using ERW or induction butt welded tubes complete all as specified and directed. |
| 9 | S&F Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exc 20 and n exc 25 cm long complete all as specified and directed. |
| 10 | S&F for pre-painted galvalume aluminium zinc coating GI based semi corugated steel sheet / Manglore pattern sheet of 0.50mm thick colour as approved having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified. |
| 11 | S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified. |
| 12 | Demolition of cement concrete (unreinforced) of any descriptions, in ground floors (floor topping, sub base etc) not exc 15cm thick, above or below ground level complete all as specified and directed. |
| 13 | M&L for hardcore of broken stone aggregate or boulders gauge n exc 63 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed. |
| 14 | M&L PCC (1:4:8) type D-2 (using 40mm graded stone aggregates) as in sub base complete all as specified and as directed. |
| 15 | M&L for 100 mm thick PCC type B1 (1:2:4) (using 20 mm graded stone aggregates) as in flooring, hardstanding or at any place finished even and smooth with using extra cement,complete all as specified and directed. |
| 16 | M&L for brick work with sub class 'B' bricks built in cement mortar (1:6) straight or curved on plan exceeding 6 mtr mean radius and all as directed. |
| 17 | M&L for rendering 20 mm thick plaster in CM (1:4) on external surfaces of brick walls finishing even and smooth with out using extra cement including necessary scaffoldings complete all as specified and as directed. |
| 18 | Supplying and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 19 | M&L for pre-polished cement concrete designer coloured chequered tiles, glossy finish, area n exc 0.16 sqm as in floors; set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) and over 40mm PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregates), complete all as specified and as directed. |
| 20 | M&L for applying two coats of Acrylic Smooth exterior paint on new surfaces with approved shade (applied @ 1.67 ltr/10 sqm per coat) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and preparation of surfaces complete all as specified and as directed. |
| 21 | S&F mild steel plates, Fe 410-W(Gde-E-250) quality-A plain or chequered, 5mm thick or over in thickness in available sizes complete all as specified and as directed. |
| 22 | Preparation of new steel surfaces of any description exc 10 cm width or girth and M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide primer complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender