|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : HQ CWE NO 2 DELHI CANTT-10 Name of Work: REPAIR/REPLACEMENT OF HT UG CABLE,GT VCB,RMU,TRANSFORMER & ITS CONNECTED ITEMS OF SALARIA OFFICERS ENCLAVE UNDER GE WEST Contract No : CWE/WEST/Token-51/2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | M&L for excavation in trenches in soft soil n.exc 1.5 Mtr wide and n.exc 1.5 meter in depth for laying of cables/pole etc setting out trimming the site forming bottom surface to required level complete all as specified and directed. |
| 3 | M&L for returning filling in-trenches including spreading leveling watering and well ramming in layers with soft/loose/dense soil n.exc 25 cm thick in each layer of soil complete all as specified and directed. |
| 4 | M&L for removing/excavated soil to a distance n.exc 50 Mtr and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed. |
| 5 | M&L for sand cushioning with a layer of sand Jamuna 23 cm thick (8 cm under and 15 cm above the cable) in trenches complete all as specified and directed. |
| 6 | M&L for fixing old serviceable un-reinforced precast concrete cable covers for cable protection of class LV type 1 flat of size 250 x150 x 40 mm, complete all as specified and directed. |
| 7 | Supplying and fixing in replacement, Silica Gel Breather assembly including vent pipe and Silica Gel for outdoor transformers, capacity upto 630 KVA to 1000 KVA, complete all as specified and directed. |
| 8 | Material & Labour for painting of transformer installed on plinth structures at SALARIA of capacity upto 1000 KVA with existing colour, with spraying machine, after cleaning, preparation of outer surface of transformer, including writing of SM No, MES and capacity of transformer complete all as specified and directed. |
| 9 | S & F XLPE cable end termination, Heat shrinkable, outdoor/Indoor type complete with jointing material and accessories suitable for voltage 11 Kv (Earthed), 3 core, 240 sqmm, complete all as specified and directed. |
| 10 | S & F XLPE cable end termination, Heat shrinkable, outdoor/Indoor type complete with jointing material and accessories suitable for voltage 11 Kv (Earthed), 3 core, 95 sqmm, complete all as specified and directed. |
| 11 | Dehydration/filtration of transformer oil by means centrifuging machine electrically operated at site of installation of transformer in running condition including testing of transformer oil before and after filtration by means of oil testing machine, keeping the electrodes at 2.5 mm gap and to achieve die electric strength of filtered oil 50 KV and above ,complete all as specified and directed. |
| 12 | Supply and topping up/replaced transformer oil conforming to IS : 335 and withstand dielectric strength of 60 KV (when tested with 2.5 Gap electrode) complete all as specified and directed. |
| 13 | Supplying, laying and commissioning of HT XLPE cables, insulated, screened, PVC bedded, galvanized steel strip armoured, earthed, electric power cable with Aluminium conductor, 11 KV grade, 3 Core, 240 Sq.mm cross sectional area laid in trenches / fixed on poles including taking up/down old cables, complete all as specified and directed. Note: Earth work,excavation,cable covers and sand cushioning shall be measured and paid separately. |
| 14 | Supplying, laying and commissioning of HT XLPE cables, insulated, screened, PVC bedded, galvanized steel strip armoured, earthed, electric power cable with Aluminium conductor, 11 KV grade, 3 Core, 95 Sq.mm cross sectional area laid in trenches / fixed on poles including taking up/down old cables, complete all as specified and directed. Note: Earth work,excavation,cable covers and sand cushioning shall be measured and paid separately. |
| 15 | Material and labour in replacement sign boards of size not less than 5 feet x 4 feet fabricated out of 16 gauge MS sheet frame duly welded/riveted with MS square pipe of size 25mm x25mm suitable for fixing in wall including necessary fixing accessories.The steel portion of the board shall be painted in stove enameled paint and the front & back of the frame shall be overall sheathed with blue colour base painter adhesive tape. The wiriting matter will be in English language on one sides with reflective adhesive painter tapes ,complete all as specified and directed. |
| 16 | Material and labour for Preparation of old painted surfaces of steel by brushing/cleaning stain, greasy spots with thinner, applying two coats of synthetic enamel paint by spray machine on all sides of 11 KV VCB panel/RMU including writing of MES /SM No and details of feeder as on graphic plastic sheet, complete all as specified and directed. |
| 17 | M & L for Locating electrical faults and repair work in HT-LT side of the transformer, VCB whenever any fault arises at Salaria officers Enclave area, making complete supply system functional dully rectifying and repair work ,complete all as specified and directed. Note: (a) Whenever any breakdown reported the Contractor will have to take immidiate action and send skilled Technician immediately on site.(b) Any parts required to be replaced during repair work shall be measured and paid for separately. |
| 18 | S & F in repair of High voltage insulation mats (ISI Marked) as per IS-15652 of size 02m X 01 m , complete all as specified and directed. |
| 19 | Supply and fixing cable route indicator for HT UG Cable of 11000 Volts bolted with 40 x 6 mm flat iron member of height 0.60 mtr, and 80 mm dia CI plate embedded in PCC 1 : 3 : 6 type C2 of size 20 x 20 x 30 cm block ,complete all as specified and directed. |
| 20 | Periodical servicing to 11KV HT RMU (3 ways) any type make- Crompton Greaves model Sabre complete including the following:-(a) Disconnecting the 11 KV line from RMU.(b) Opening the RMU and replacement the unserviceable part as required at site.(c) Checking of mechanical system for proper functioning of upward/downward or clock wise and anti clock wise movement of breaker.(d) Cleaning & servicing the fixed/ moving contact,busbar,cable boots with the CTC solution and greasing/oiling the parts where required or as directed. (e) Tighting the all loose parts and testing complete as directed by EIC.(f) Repair the door/lock incl welding and painting and replacement of lock/handleNote- (i) Replacing new items shall be included in the quoted rates. (ii) Other part which is not included but required for functioning of equipment is included in the quoated rate. (iii) Remove the moisture from RMU by heating (iv) The above job to be carried out by engineer of authoriseddealer/service centre of concerned manufacturer. (vii) Painting with the approved colour after preparationg of old surface as directed. |
| 21 | Maintenance,Servicing,cleaning,Vaccum circuit breaker unit 11KV of capacity 630A, make CG,racking out from panel / opening of the VCB for servicing / overhauling, taking out and removing unserviceable/defective parts including cleaning & servicing ,greasing, oiling of the parts etc and replacement of unserviceable parts with new one, reassembling the VCB after overhauling / servicing and Calibration and testing of 11KV VCBs indoor type along with control panel and control wiring,protection system and Calibration of relays by injecting high voltage/ current in primary / secondary side as required for check the triping mechanism complete including rectification of defects noticed, complete all as specified and directed. |
| 22 | S&F differential relay CT 11KV single phase out door oil cooled CT of ratio 800/400/5 -5 amps class 1.0 - 5P 10 burden 15 VA insulation level 70KV/170 KV as per IS : 2705 including check wiring from CT to Differential three relay ,complete all as specified and directed. |
| 23 | M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregates as in foundation of, PCC blocks etc including necessary form work ,complete all as specified and directed. |
| 24 | Supply & Fixing LT panel LED indication lamp for breaker ON/OFF/TRIP/Breaker Spring Charged/R-Y-B-W etc for 440V LT control panel/APFC Panels and associated wiring, if reqd, including taking down old UNSV LED indication, complete all as specified and directed. |
| 25 | Supply and installation Anti-condensation space-heater withThermostatic control in cable and circuit breaker compartments of HT switchgears/VCB including taking down old UNSV heater, complete all as specified and directed. |
| 26 | Supply & Fixing of fixed contact block complete suitable for 400 amps, 11 KV HT VCB including taking down old UNSV contact block, complete all as specified and directed. |
| 27 | Supply & Fixing of moving contact block complete suitable for 400 amps, 11 KV HT VCB including taking down old UNSV moving contact block, complete all as specified and directed. |
| 28 | Supply & Fixing of Digital Amp meter (CT secondary site selectable 5A) for 11 KV VCB Control Panel including taking down old UNSV meter, complete all as specified and directed. |
| 29 | Supply & Fixing of Digital Volt meter Secondary voltage 110 V for 11 KV VCB Control Panel including taking down old UNSV meter, complete all as specified and directed. |
| 30 | Supplying and fixing Potential Transformers, in existing VCB Panel Indoor type 12 KV 630 amp,350 MVA(incoming) PT 11KV/110 Dc 24 Volt Ct ratio 200/5 Amp with necessary busbar and connected items dully fixing and made functional the VCB including taking down old UNSV PTs, complete all as specified and directed. |
| 31 | M & L for earthing complete with galvanized steel earth plate each 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point earth plate surrounding use of charcoal dust and salt in layer including excavation and earth work , GI pipe 20 mm dia light grade for watering with wire mess and funnel and GI pipe 15 mm dia medium grade for protection of earth lead complete upto main TPN DB making of PCC earth pit using 1:2:4 type B1 using 20mm dia stone aggregate provision of MS PIT cover 300mm x300mm with handle complete all as specified or indicated including testing on , complete all as specified and directed. |
| 32 | M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to pole or any other indicated situation using GI strip 25 x 4 mm as earthing lead complete all as directed including taking down the old unserviceable , complete all as specified and directed. |
| 33 | S & F danger notice plate of size 25x20cm & 1.6mm thick, mild steel sheet, vitreous enamelled white with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamp, bolts and nuts of approved size for HT, complete all as specified and as directed. |
| 34 | Supply & Fixing of Digital/electronic Amp meter up to 630 Amp suitable for upto 440V Control Panel dully fixing in existing LT Panel with necessary arrangement/Hylum Sheet as required including taking down old UNSV meter, complete all as specified and directed. |
| 35 | Supply & Fixing of Digital/electronic Volt meter suitable for upto 440V Control Panel dully fixing in existiing LT Panel with necessary arrangement/Hylum Sheet as required including taking down old UNSV meter, complete all as specified and directed. |
| 36 | Preparation of old painted surface removing of rust from any kind of steel surface, clamps, TFR fencing etc for of any description and repainting by 1st quality Synthetic enamelled paint 1 coat over a coat of primer, complete all as specified and directed. |
| 37 | M & L Cleaning /servicing of LT distribution Panel , after Checking the incoming and outgoing connections from MCCB/ Bus bar and replacing the old burnt/ overheated unserviceable lugs, terminals, nuts, bolts, washers supporting insulators etc and checking the serviceability of MCB / MCCB, earth continuity conductor and strip etc complete all as specified. Dully blowing out all unwanted dust etc with high pressure air blower and painting complete Panel with existing colour after cleaning at Substation Salaria and Transformer Distribution Panel complete all as specified and directed. |
| 38 | M & L Cleaning /servicing of APFC Panel , after Checking the incoming and outgoing connections from MCCB/ Bus bar and replacing the old burnt/ overheated unserviceable lugs, terminals, nuts, bolts, washers supporting insulators etc and checking the serviceability of Capacitor Bank/ APFC relay/ CTs etc and making functional all ammeater and voltmeter, earth continuity conductor and strip etc complete all as specified and painting complete Panel with existing colour after cleaning complete all as specified and directed and repair/replacement of following parts:- |
| 39 | M&L for Replacement for LT APFC panel CTs as per existing ratios including taking out old Us CTs complete all as specified and directed. |
| 40 | M&L for Replacement of Capacitor bank for capacitor panel of capacity 50 KVAR complete including taking out old u/s one complete all as directed . |
| 41 | M&L for Replacement of Capacitor bank for capacitor panel of capacity 25 KVAR complete including taking out old u/s one complete all as directed . |
| 42 | M&L for Replacement of Capacitor bank for capacitor panel of capacity 15 KVAR complete including taking out old u/s one complete all as directed . |
| 43 | M&L for Replacement of Capacitor bank for capacitor panel of capacity 10 KVAR complete including taking out old u/s one complete all as directed . |
| 44 | Dismantling/ demolition posts or struts embedded in soil or concrete etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed. |
| 45 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 46 | Excavation in post holes (or similar holes) n exc 0.5 cum getting out in any type of soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm and covering and removal of surplus soil n exc 50m and making good surface, complete all as specified and directed. |
| 47 | M&L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete , complete all as specified and directed. |
| 48 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting, etc including embedding in concrete and similar work conforming to Fe-290 Gde-E-165 , complete all as specified and directed. |
| 49 | M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide, complete all as specified and directed. |
| 50 | M&L for preparation of new or previously untreated steel Surfaces of any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth and applying a coat of black bituminous paint, complete all as specified and directed. |
| 51 | Supply only chain link MS galvanized fencing any size or type, complete all as specified and directed. |
| 52 | Fixing only chain link fencing including line wires any mesh size and type of standards , rails, straining bolts etc , complete all as specified and directed. |
| 53 | S&F MS round bar 10 mm dia and above cut to length bend to shape required including cranking bending separately spirally for hopping for col hooking ends and binding with mild steel wire not less than 0.9 mm dia or securing with clip qly confirming to IS, complete all as specified and directed. |
| 54 | M & L for Cutting wild grass, bushes, creaper, unwanted vegetation from inside/ surrounding of E/M installations, near sweage pump installations as when directed and removing of unwanted material from installation compound and depositing where directed. |
| 55 | Supply and laying un-reinforced precast concrete cable covers for cable protection of class LV type 1 flat of size 250 x150 x 40 mm, complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
