|
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | Plain Cement Concrete Type D2 1:4:8(40 mm graded stone aggregate) in foundations filling and mass concrete complete all as specified and as directed. |
| 4 | Material & Labour Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed. |
| 5 | Material & Labour for reinforced cement concrete type B1 1:2:4 using 20mm graded stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, and mass concrete complete all as specified and as directed. |
| 6 | Material & Labour Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 7 | Material & Labour Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 8 | All as per item No 7 as above but 6mm to 10mm dia in stirrups complete all as specified and as directed. |
| 9 | Supply and Fixing GI pipe with all fittings and fixed complete to walls as in frame work complete all as specified and as directed. |
| 10 | Material & Labour Framed brackets of angles, channels or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 11 | Mild steel bolts. purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long diameter of neck exc 12 mm and n. exc 20mm complete all as specified and as directed. |
| 12 | Material & Labour for Non Asbestos cement plain building boards 10mm thick, fixed to GI pipe framework with self thread screws complete all as specified and as directed. |
| 13 | Material & Labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 14 | Material & Labour Hardcore using broken stone or boulders of gauge n exc. 63 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 15 | Material & Labour for PCC sub base 75 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded stone aggregate) complete all as specified and as directed. |
| 16 | Material & Labour Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, leveled and rammed including watering complete all as specified and as directed. |
| 17 | Material & Labour for Vitrified coloured Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete laid over and including provision of Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed. |
| 18 | All as per item No 17 as above but in skirting/dado using adhesive complete all as specified and as directed. |
| 19 | Rendering 10mm thick in Cm 1:6 on fair faces of brick work or concrete surfaces and rendering is to be finished fair and even without using extra cement complete all as specified and as directed. |
| 20 | Material & Labour Plain cement concrete type B1 1:2:4 using 20mm graded stone aggregate as in column, pillars etc complete all as specified and as directed. |
| 21 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed. |
| 22 | Material & Labour for preparation of new surfaces and applying two coats of oil bound distemper over a coat of primer over a coat of 1mm thick wall care putty complete all as specified and as directed. |
| 23 | Material & Labour for preparation of new surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 24 | Material & Labour for preparation of new galvanized surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 25 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanized steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) (A) Area not exceeding 2.00 sqm each complete all as specified and as directed. |
| 26 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area up to 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). |
| 27 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door up to 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately) |
| 28 | Material & Labour for Sheet glass 4.00 mm thick , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 29 | Material & Labour for Sheet glass 4.00 mm thick , ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 30 | Material & Labour for Sheet glass 5.50 mm thick , ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 31 | Material & Labour Plain cement concrete 75 mm thick type C2 1:3:6 (40 mm graded stone aggregate) as in plinth protection finished fair and even complete all as specified and as directed. |
| 32 | Providing & fixing false ceiling at (a) all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of perforated Size 595 x 595 mm of approved texture with semi perforated 12mm thick micro regular edged GRG false ceiling tiles , design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic raw plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. |
| 33 | Material & Labour for preparation of new surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 34 | Supply & Fixing Vitreous China wash basin, white, flat back, size 550x400 mm excluding ditto but including brackets complete all as specified and as directed. |
| 35 | Supply & Fixing SS towel rail of size 600mm |
| 36 | Supply & Fixing 600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 37 | Supply & Fixing Pillar taps fancy type 15mm bore with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 38 | Supply & Fixing 32mm Low density polyethylene pipes (LDPE) waste pipe of pressure rating 6kgf/cm2 fixed complete to walls, or in floors etc.for sinks/basin etc complete all as specified and as directed. |
| 39 | Supply & Fixing PVC connection 15mm dia and 450mm long with PTMT nuts complete all as directed. |
| 40 | Supply & Fixing 15mm dia bore stop cock/angle cock, cast fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe on for unions and fixed complete all as specified and as directed. |
| 41 | Supply & Fixing 15mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., with all fittings fixed complete all as specified and as directed. |
| 42 | Supply & Fixing 20mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., with all fittings fixed complete all as specified and as directed. |
| 43 | Material & Labour for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick using adhesive set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed. |
| 44 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 45 | Material & Labour for Reinforced cement concrete type B1 1:2:4 using 20mm graded stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 46 | Supply & Fixing for PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 47 | Supply & Fixing for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed. |
| 48 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. |
| 49 | Material & Labour for modular kitchen at bottom of kitchen platform and top cabinets using 19mm thick water proof plywood inside 7 mica white and half white miraci PVC mica, hardware materials, soft close hinges, Drawer channel, kitchen baskets, profile handles etc complete all as specified and as directed. |
| 50 | Supply & Fixing sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 51 | Supply & Fixing Bib taps chromium plated 15mm bore , with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 52 | Material & Labour for Chequered cement concrete tiles bull nosed 32cmx 20cm x 30mm thick as in treads thick with grey pigment and cement, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed. |
| 53 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 54 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 55 | Providing & fixing 150mm wide non asbestos 6m thick fiber cement board, type-A category III as per IS : 14862:2000 for sheet covering over expansion joints with iron screws complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 56 | Providing & fixing 150mm wide non asbestos 6m thick fiber cement board, type-A category III as per IS : 14862:2000 for sheet covering over expansion joints with iron screws complete all as specified and as directed. Please Enable Macros to View BoQ information |
