Tender For Repair To Joinery And Repair/Maint Of Internal Fittings/ Fixtures And Other Misc Works Of E/M Nature At Akhnoor Mil Stn Under Ge(North) Akhnoor.
Tender Value
39.76 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
0 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Akhnoor → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery And Repair/Maint Of Internal Fittings/ Fixtures And Other Misc Works Of E/M Nature At Akhnoor Mil Stn Under Ge(North) Akhnoor.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed. |
| 2 | Taking down chowkats or frames exceeding 1.5 Sqm and n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) all as specified and directed. |
| 3 | Taking down of shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each complete all as specified and as directed. |
| 4 | Taking down and refixing incl resecuring and easing shutters of area exceeding 1.00 sqm but n.exc 2.00 Sqm each in the same opening complete all as specified and as directed. |
| 5 | Pressed steel frames for doors with one or more rebates of size 105x60mm including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh hold bar complete all as specified and as directed. |
| 6 | Pressed steel frames for doors with one or more rebates of size 125x60mm including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh hold bar complete all as specified and as directed. |
| 7 | Steel windows/ventilator (Box type) factory made with double shutter with or without devetailed bar ( glass & gauged shutter) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts in each shutter 100mm long with & including 8mm square bar grills, complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh No 1/1 to 1/3 .Note:-(a) Fixed type glass panes shutter if any provided in above same window shall be measured and paid separately & area of these fixed shutter shall be deducted from total area of box type window for payment purpose. (b) Sheet glass/ wire cloth shall be measured & paid separately under respective item |
| 8 | Steel windows/ventilator (Box type) factory made with double shutter with or without devetailed bar ( glass & gauged shutter) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts in each shutter 100mm long without grills and glazing bars, complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh No 1/1 to 1/3 .Note:-(a) Sheet glass/ wire cloth shall be measured & paid seperately under respective item |
| 9 | Aluminium powder coated sliding window, chowkat of size 63mm x 40 mm x 1.3 mm thick with aluminium powder coated two track frame of size 63 mmx 32mmx 1.3 mm thick with 2 Nos sliding shutter of powder coated aluminium section (top rail,bottom rail and style of size 40mmx 18mm x 1.3 mm thick screwed to wall/floor including provn of 4mm thick tinted sheet glass fitted in panel including necessary locking device , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed including fixing of stainless steel wire cloth 0.36mm nominal dia of wire and width of aperture 1.4 mm to aluminium frame with and including aluminium grill fitted with aluminium flat of size 40mm x 3mm complete all as specified and as directed. |
| 10 | Aluminium powder coated door shutter with powder coated frame of size 65mm x 50 mm x 1.6 mm thick fixed with hinges and shutter with top rail,bottom rail, middle rail and style of size 85mmx 44mm x 1.6 mm thick with 200mm size aluminium handle on both side of shutter aliminium tower bolt 150 mm long 2 Nos per leaf including 5.5 mm thick selected quality , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed hydraulic door closer for each leaf , mortice lock 4 levers with 2 Nos key , 3Nos butt hinges of stainless steel for each shutter including provn of 8 mm dia nut and bolt on both side of top rail and bottom rail complete all as specified and as directed. |
| 11 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames/Aluminium frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed. |
| 12 | 3 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed. |
| 13 | 3 mm thick sheet glass figured (frosted), ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed. |
| 14 | 4 mm thick tinted sheet glass, selected quality and glazing with aluminium beads and rubber packing in square not exceeding 0.5 square metre in each pane fixed in repairs, complete all as specified and as directed. |
| 15 | Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 16 | Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples fixed in repairs, complete all as specified and directed. |
| 17 | Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of anti corrosive synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 18 | Preparation of new untreated wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 19 | Preparation of old steel surfaces of any description exc 10 cm width or girth, and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 20 | Preparation of old painted wooden or wood based surfaces of any description not otherwise described, over 10cm width or girth including knotting and stopping as required and applying one coat of synthetic enamel paint of Ist quality, complete all as specified. |
| 21 | PCC 1:2:4 type B-0 (Using 12.5 mm graded crushed stone aggregate) as in filling of pressed steel frame as in 50 mm parapet coping or in lintels upto 1.5m clear span, cills, plinth courses, string courses, coping, kneelers etc all as specified and directed. |
| 22 | PCC 1:3:6 type C-1 (Using 20mm graded crushed stone aggregate) for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and as directed. |
| 23 | 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified & as directed. |
| 24 | 35 mm thick, 2nd class soft wood, glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified and as directed. |
| 25 | Factory made 30 mm thick ,Flush shutters, solid core construction, with block board core and plywood face panels, one face is commercial and other face is covered with decorative face veneer with lipping/frame to match the surface etc complete all as specified & as directed. |
| 26 | Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and directed. |
| 27 | Factory made solid panel PVC door shutter/ cupboard shutter/ kitchen cabinets 30mm thick style wooden texture consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified and directed. |
| 28 | 100 mm butt hinges, medium weight cold rolled mild steel, complete all as specified. |
| 29 | 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified. |
| 30 | 150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed. |
| 31 | Aluminium handle cast type anodised of size 150mm long ISI marked complete extruded . |
| 32 | Door closer of aluminium (Die cast body), hydraulically regulated, designation No 3, universal type, suitable for door shutters of size 851mm to 1000mm of width and of weight between 61 to 80 kg, ISI marked fixed in repairs, complete all as specified and as directed. |
| 33 | Aluminium body Mortice lock,4-levers vertical type, size 100 mm with & including escutcheon plates and two keys fixed in repairs, complete all as specified and as directed. |
| 34 | 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 35 | S&F in repair 25 mm dia aluminium anodised curtain rod complete with stainless bracket and side caps fixed in position by drilling holes in wall and fixed the bracket with rawl plug and SS screw all as specified and as directed. |
| 36 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 37 | Rendering 10 mm thick cement plaster with cement mortar(1:6) on other than fair faces of brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement complete all as specified and directed |
| 38 | 15mm thick cement plaster rendering in CM 1:4 on fair faces of brick or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed |
| 39 | Rendering 5mm thick cement plaster with cement mortar(1:3) on concrete surface as in ceiling finished the surface even and smooth without using extra cement, complete all as specified and directed |
| 40 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 41 | 25 mm thick PCC 1:2:4 type B-0, (using 12.5mm graded crushed stone aggregate) as in sub base / levelling cousre including finishing surface of concrete topping even and rough , complete all as specified and as directed. |
| 42 | Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework, complete all as specified and as directed. |
| 43 | Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed |
| 44 | Ditto all as per item No. 43 here in before but except bricks. |
| 45 | Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius in half brick thick wall built in cement mortar 1:4, complete all as specified and diected |
| 46 | Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed/base in cement and sand mortar 1:6, complete all as specified and directed. |
| 47 | Ditto all as per item No. 46 but in skirting over and including 10 mm thick rendering in CM 1:4. |
| 48 | Glazed ceramic tile 450x300mm/ 350X250mm x 7 to 8mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick bedding layer in cement and sand mortar 1:4 complete all as specified and as directed. |
| 49 | Vitrified ceramic tiles (Light shade) 10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm laid as in floors/skirting, set and jointed in neat cement slurry and pointed in white/coloured cement to match with shade of tiles including 15mm thick screed bed/base in cement and sand mortar 1:6, complete all as specified and directed. |
| 50 | Ditto all as per item No. 49 but in skirting over and including 10mm thick rendering in CM 1:4. |
| 51 | Sub main wiring complete with 2 run of 2.5 sqmm single core copper conductor (ISI marked)cable 1100 volts grade,FRLSH type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 2.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour code and applying putty including cutting and chiseling and complete all as specified and directed.Note : - Two run of 2.5 sqmm single core copper conductor cable and one run of 2.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as RM. |
| 52 | Sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade,FRLSH type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour code and applying putty including cutting and chiseling and complete all as specified and directed.Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as RM. |
| 53 | Sub main wiring complete with 2 runs of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade,FRLS type, PVC insulated, unsheathed, flexible, multi stranded colour coded cables drawn through rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 6.00 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLS type as earth continuity conductor connected to common earth dolly including making good the disturbed surfaces to match with existing surface including taking down of old existing submain cable complete all as specified and directed. Note : - Two run of 6.00 sqmm single core copper conductor cable and one run of 6.00 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. |
| 54 | Single pole and neutral enclosure with two pin and earth plug and socket with one single pole MCB of capacity 20 amp 240 volts and connecting electrically including taking down unserviceable MCB complete all as specified and directed. |
| 55 | Vertical double door enclosure factory made TPN in replacement fitted with bus bar neutral link, blanking plates of 4 way (4+12) with suitable for incomming MCCB 4 pole 'I/C' frame,having isolated neutral bar, mechanical impact strength IK09, door earthing suitable for MCCB upto 125 Amp fixed in repairs, complete all as specified and as directed. |
| 56 | Vertical double door TPN in replacement are fitted with Bus bar neutral link, blanking plates of 6 way with suitable for incomming MCCB 4 pole 'G' frame,having isolated neutral bar, mechanical impact strength IK09, door earthing suitable for MCCB upto 125 Amp fixed in repairs, complete all as specified. |
| 57 | MCCB , 4 Pole, adjustable thermal & fixed magnetic, braking capacity 16 KA, 125 Amp complete incl fixing in replacement existing LT panel with necessary arrangement fixed in repairs complete all as specified and directed. |
| 58 | MCB TPN 415 Volts 10 KA, B curve 63 Amp to 100 Amp suitable for TPN vertical loadline including taking down existing one complete all as specified and directed. |
| 59 | Sheet metal enclosure double door type for DBs single pole and neutral 6 way 240 V with 200 Amp rated bus bar including blanking plates where required fixed in repairs complete all as specified and as directed. |
| 60 | Sheet metal enclosure double door type for DBs single pole and neutral 8 way 240 V with 200 Amp rated bus bar including blanking plates where required fixed in repairs complete all as specified and as directed. |
| 61 | Sheet metal enclosure double door type for DBs single pole and neutral 12 way 240 V with 200 Amp rated bus bar including blanking plates where required fixed in repairs complete all as specified and as directed. |
| 62 | MCB SP 6 to 32 Amps 10 KA,\\"C\\" series,AC,240Volts,50Hz , ISI marked fixed in repairs complete all as specified and directed. |
| 63 | MCB SPN 32 to 40 Amps 10 KA,\\"C\\" series,AC,240Volts,50Hz, ISI marked fixed in repairs complete all as specified and directed. |
| 64 | MCB Double Pole 240 volts 40 to 63Amps 10 KA 'C' series fixed in repairs all as specified and as directed. |
| 65 | MCB TPN, 415V, 40 Amps, 'C' series fixed in repairs, complete all as specified. |
| 66 | MCCB TPN 415 volts 10 KA, 100 Amp suitable for TPN vertical loadline DB fixed in repairs complete all as specified and directed. |
| 67 | Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed. Please Enable Macros to View BoQ information |
| 68 | Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 13, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender