|
| 1 | Lumpsum price worked out by the tenderer for BUILDINGS / STURCTURES / SOIL INVESTIGATION AND OTHER WORKS as listed in Schedule 'A' Part-I |
| 2 | Lumpsum price worked out by the tenderer for SITE CLEARANCE AND DEVELOPMENT as listed in Schedule 'A' Part-II |
| 3 | Lumpsum price worked out by the tenderer for EXCAVATION AND EARTH WORK as listed in Schedule 'A' Part-III |
| 4 | Lumpsum price worked out by the tenderer for ROAD/ PATH/ CULVERT as listed in Schedule 'A' Part-IV |
| 5 | Lumpsum price worked out by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule 'A' Part-V |
| 6 | Lumpsum price worked out by the tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule 'A' Part-VI |
| 7 | NOTE: 1. Schedule ‘A’ Part - I here-in-before is not prepriced by MES and left blank under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6.2. Schedule ‘A’ Part - II to VI here-in-before are prepriced by MES under Ser No.1.00 to 6.00 Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.3. Schedule ‘A’ Part - VII (MISCELLANEOUS ITEMS) hereinafter is not prepriced by MES and prepriced by MES and rate left blank under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6. |
| 8 | SCHEDULE ‘A’ PART - VII (MISCELLANEOUS ITEMS) |
| 9 | EXTERNAL WATER SUPPLYM & L for Cutting existing 80 mm bore CI/GI pipe for alteration or additions and inserting TEE (100 x 80 x 50mm) including making necessary threading and fixing Unios etc complete all as specified and directed. |
| 10 | EXTERNAL ELECTRIC SUPPLYSupply and spread natural riddled soil as earth cushioning to UG cable by using IS seive to separate the composite particle/root etc and refillinjg/spread in trenches as cushioning and ramming down to form a solid bed covering to cable complete all as specified and directed. |
| 11 | M & L for cutting roads/ hard standing/ path etc for laying LT cables through pipes of any size and depth n.exc 35cm from GL and making good the damaged surfaces complete as per the existing specifications of roads/ hardstanding/ path etc to match with the existing surfaces complete all as specified and directed. |
| 12 | Supply, Install, Testing and Commissioning, LT feeder pillar box (KIOSK), CPRI approved factory fabricated, outdoor type, plateform mounted, Dust and vermin proof, weather proof, made out of 3.15mm thick CRCA sheet in cubical patter of suitable size, duly powder coated, IP-65 class of protection, front opening type with aprons for cable entry with double door shutter and locking arrangement (including provn of 65mm lock with 2 Keys (Make: Godrej), suitable for 415Volts, 3 phase, 4 wire, 50 Hz AC supply, having bus bar chamber with insulated aluminium bus bars, 250 Amps, internally wiring with PVC insulated, copper conductor, FRLS cable, conforming to IS-694, ISI marked of suitable cable size but not less 4 Sqmm complete all as specified and directed comprising with the following items:(A) Incoming:(i) MCCB, 4 pole, 160Amp, 25KA rupturing capacity - 01 No (ii) Digital type Volt meter square type flush pattern with 3 way selector rotary switch, 0 - 500 V - 01 No. |
| 13 | (iii) Digital type Ammeter with CT ratio 400:5 square type with 3 way selector rotary switch - 01No(iv) Indicator LED type RYB set - 01 set of three(B) Outgoing(i) MCCB, 3 pole, 415 Volts grade, 63Amp, 25 KA rupturing capacity - 01 No (ii) MCCB, 3 pole, 415 Volts grade, 40Amp, 25 KA rupturing capacity - 02 Nos(iii) MCB, TPN, 415 Volts grade, 40Amp - 06 Nos(iv) MCB, SPN, 415 Volts grade, 40Amp - 02 Nos(C) The nplatform for the panel board shall be of suitable size with PCC 1:4:8 type D-2 (using 40m graded aggregate) for foundation lean concerete (15cm thick), brick wall in CM 1:6 using sub class 'B brick, old size, rendering in cement mortar 1:6 15mm thcik opn exposed surfaces of wall and 100 mm thick PCC pading 1:3:6 type C-1 (using 20mm graded aggregate) on top over hardcore and grouting bolts etc for fixing panel board. The height shall be 45cm above the nearest road level |
| 14 | WASTE DISPOSAL PLANTSupply, Install, Commissioning and Testing, ECOGNIK-3000 ECOGENIK WASTE DISPOSAL SYSTEM suitable to operate at 415 V, AC power supply with power load 12 KW for mixed solid waste (MSW), dry and wet paper waste, cartons waste, plastic waste, polythylene bag, organic waste, plastic sheets and plastic scrap, organic waste with less than 40% moisture with disposal capacity 3000 Kg/day and volumetrically 2.5 cubic metre with necessary heater arrangements and multi layered venturi-water vent scrubber for flue gas treatment and 6 metre height MS constructed chimney, single feeding point, temperature 350°C to 400°C with pressure release valve and temperature monitor sensors, rox wool heat proof insulation including transportation and opoerational training to operating staff complete all as specified and directed by the Engr-in-Charge.Make: Maan Enviro Technologies /Antony waste handling cell pvt Ltd / Resustainability Limited or equivalent make approved by GENote: Drawing of the solid waste plant shall be approved by the Accepting Officer |
| 15 | Supply, Install, Commissioning and Testing of industrial shredder, single shaft, shred capacity 0-500 Kg/Hr heavy duty type with 5 HP motor for shredder complete all as specified and directed by the Engr-in-Charge. |
| 16 | Supply, Install, Commissioning and Testing of industrial shredder/organic shredder, twin shaft, shred capacity 500-1000 Kg/Hr, heavy duty type with 15 HP, 3 phase motor for shredder complete all as specified and directed by the Engr-in-Charge. |
| 17 | Supply, Install, Commissioning and Testing of heavy duty compactor/ Bailing machine of capacity 30 Ton with 7.5 HP three phase motor to generate min 1800-2000 Psi hydraulic pressure complete all as specified and directed by the Engr-in-Charge. |
| 18 | Supply, Install, Commissioning and Testing of Electric Agri Waste shredder/ Follage shredder machine of capacity 1-500 Kg/Hr with 2 HP motor complete all as specified and directed by the Engr-in-Charge. |
| 19 | Supply, Install, Commissioning and Testing of Electric driven heavy duty spray machine of capacity 12 LPM with 5 HP, 3 phase motor including 50 feet flexible pipe and brass nozzle complete all as specified and directed by the Engr-in-Charge. |
| 20 | Supply, Install, Commissioning and Testing of Electronic Weighing machine of capacity 200 Kg including LED display panel and charger complete all as specified and directed by the Engr-in-Charge. |
| 21 | Supply, Install, Commissioning and Testing of Semi Automatic packing machine for manure of capacity 20-50 Kg per bag with 300 bags per hour complete all as specified and directed by the Engr-in-Charge. |
| 22 | Supply, Install, Commissioning and Testing of 750mm wide slider plate flat belt conveyer with 3mm thick PVC green belt having 70mm high cleats at every 500mm pitch. The conveyer shallhave a 6 meter long 30 degree inclined section and 10 metre long horizontal section for sorting by pickers on either side complete all as specified and directed by the Engr-in-Charge. Make for Item No. 12 to 19 : Maan Enviro Technologies /Antony waste handling cell pvt Ltd / Resustainability Limited or equivalent make approved by GE Please Enable Macros to View BoQ information |
