|
| 1 | Repairs to pot holes any depth, n.exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surface in roads, path etc cutting around edges to at least 25mm in depth, making good by supplying and filling in screened and graded road metal, watering and well ramming with 8 to 10 tonne power roller complete all as specified and directed. |
| 2 | Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed. |
| 3 | M&L for applying evenly a priming/ tack coat with paving bitumen VG-10 Grade @5 kg/10 Sqm complete all as Specified and directed. |
| 4 | Material and labour for premix bituminous macadam laid/rolled and compacted to required gradient and camber, average consolidated thickness 75mm or less using bitumen- VG 30 grade @ 4% by weight or aggregate including scrafying existing bituminous macadam surface complete all as Specified and directed. |
| 5 | M&L Bituminous premixed asphaltic semi dense concrete 30 mm thick consolidated thickness with 5.5% binder content by weight of total mix using machanical paver, rolled and compacted to required camber and gradient with using power roller 8 to 10 tonne complete all as specified and directed. |
| 6 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 7 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) ofhigh efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as permanufactures instructions etc complete all as specified and directed. |
| 8 | Demolition of cement concrete (unreinforced ) as in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 9 | Cement Concrete work in pavement/hard standing of flexural Strength 40 Kg/Square centimeter in field using 400 kg of cement per cubic metre,thickness of concrete 25 cm or less complete all as specified and directed. |
| 10 | Forming 12 mm thick expansion joints for 200 mm thick concrete slab filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound Grade'A' complete all as specified and directed. |
| 11 | Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying tack coat with bituminous primer @ 5 kg per 10 sq m, putting in premix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cu m of sand), again well rammed (including supply of premix binder and sand) depth of potholes n exc 30 mm complete all as specified and directed. |
| 12 | Supply and fixing in repair cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as Specified and directed. |
| 13 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. |
| 14 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 15 | M&L 15 mm thick cement plaster on fair faces of bricks work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed. |
| 16 | M & L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curveshall not to more than 5 mm), including making drainage opening wherever required complet as required complete all as specified and directed. |
| 17 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 18 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 19 | M&L for bituminous premixed asphaltic semi dense concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix using bitumen of grade VG-30 by machanical paver, rolled and compacted to required camber and gradient with using power roller 8 to 10 tonne complete all as specified and directed. |
| 20 | Taking down old U/S cat eye complete all as specified and directed. |
| 21 | Demolition of cement concrete (unreinforced) in ground floors and paving any description and in any position not otherwise specifically complete all as specified and directed. |
| 22 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate), 100 mm thick as in flooring including Use and waste of necessary form work and to divide the area in panels Finish even and fair without using extra cement and finish the top layer with broom complete all as specified and directed. |
| 23 | Forming contraction(Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade A complete all as specified and directed. S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 Please Enable Macros to View BoQ information |
