|
| 1 | Taking down cement or cement lime plaster wall and ceiling including in patches, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 2 | M&L for Dubbing out average 20 mm thick CM 1:4 on irregular face of old wall/ceiling fin facias chajjas etc complete all as specified and directed. |
| 3 | M&L Rendering including in patches, 10 mm thick in cement mortar 1:3 on concrete surfaces,Chajjas in ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M & L Preparation of newly plastered ceiling surfaces and applying three coat of white wash. (above item shall be applied by the brush not by spray gun) complete all as specified and directed. |
| 5 | M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 6 | M & L Preparation of newly plastered wall surfaces and applying two coat of white wash complete. (above item shall be applied by the brush not by spray gun) complete all as specified and directed. |
| 7 | M & L Preparation of newly plastered wall surfaces and applying two coats oil bound distemper over a coat of primer complete. (above item shall be applied by the brush not by spray gun) complete all as specified and directed. |
| 8 | M & L rendering 15mm thick on fair faces of brick work,concrete or stone masonry surfaces in CM 1:4 with using water proofing compound and finished even & smooth without using extra complete all as specified and directed. |
| 9 | M&L Preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer (above item shall be applied by the brush not by spray gun) complete all as specified and directed. |
| 10 | M&L Preparing new plastered or unplastered surfaces of walls and applying two coats of all weather coat exterior emulsion paint over a coat of primer(above item shall be applied by the brush not by spray gun) complete all as specified and directed. |
| 11 | Wire netting of galvanized steel wire 0.91 mm dia fixed with tinned tacks of wire staples size of mesh 20 mm as in chhajas / ceiling plaster repair works complete all as specified and directed. |
| 12 | Supply only water proofing compound complete all as specified and directed. |
| 13 | M&L for 3mm thick (1.5mm thick each in two layer application) wall care putty of old surface of wall incl rubbing down with sand paper to have even and smooth surface complete all as specified and directed. |
| 14 | Demolition of PCC block/stone masonery built in cement mortar of any specification and in any position complete all as specified and directed. |
| 15 | M & L brick work with flyash bricks straight or curved onplan exc 6 m mean raidus built in cm 1:6 complete all as specified and directed. |
| 16 | M&L Brick work with Fly ash Bricks straight or curved on plan to any radius in half brick thick walls built in cm 1:4 complete all as specified and directed. |
| 17 | Providing cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in coping, kerbs,benching and the like, including weathering slighthy rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed. . |
| 18 | Demolition of reinforced cement concrete of any descrpritpion and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition).complete all as specified and directed. |
| 19 | M & L RCC M25 using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etccomplete all as specified and directed. |
| 20 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick flat surfaces (Horizontal or sloping) complete all as specified and directed. |
| 21 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed. |
| 22 | M&L for mild steel deforming bar 10 mm dia and over cut to shape required including cranking bending spirally for hooking end and binding with mild steel wire (annealed) not less than 0.9 mm dia.complete all as specified and directed. |
| 23 | All as per item here-in-above but 6 to 8 mm dia complete all as specified and directed. . |
| 24 | Demolition of cement concrete (un-reinforced) in floors / pavings, (Below or above gl) and of any description and in any posting not otherwise specifically provided complete all as specified and directed. |
| 25 | M&L PCC 25 mm thick 1:2:4 type B1using aggregate as in leveling course complete all as specified and directed. |
| 26 | Materials and labour 15mm thick screed bed or bedding layer in CM 1:6 for laying flooring etc complete all as specified and directed. |
| 27 | Materials and labour for 10mm thick screed bed in CM 1:4 for laying of wall tiles/kota stone. complete all as specified and directed. |
| 28 | Dismentling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles from site and and rubbish off the permises complete all as specified and directed. |
| 29 | M&L Vetrified ceramic tiles 10mm thick (Square/rectangular) polished light shade area of each tiles n exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles all as specified and as directed (Asian, Orient, Somany & Johnson 1st Grade) complete all as specified and directed. . |
| 30 | M&L Vetrified ceramic tiles 10mm thick (Square/rectangular) polished light shade area of each tiles n exc 0.36 Sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles all as specified and as directed (Asian, Orient, Somany & Johnson 1st Grade) complete all as specified and directed. |
| 31 | M & L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the complete all as specified and directed. |
| 32 | M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match complete all as specified and directed. |
| 33 | M & L 20 mm thick Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 34 | M & L 12 mm thick wall lining Granite (of any type) tiles 12mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 35 | M&L for 20 & 25mm thick machine cut kota stone slabs of suitable size of kota stone as in floors bedded in grey jointed, pointed in coloured cement incl cutting and polishing complete all as specified and directed. |
| 36 | M&L for 20 & 25mm thick machine cut kota stone slabs of suitable size of kota stone bedded in grey jointed, pointed in coloured cement incl cutting and polishing all as spd but vertical surfaces as in skirting /dado complete all as specified and directed. |
| 37 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete all as specified and directed. . |
| 38 | M&L for hard core of broken stone of guage n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed. |
| 39 | M&L for PCC 1:4:8 type D-2 using 40mm graded stone agg in sub base flooring thickness 75mm complete all as specified and directed. |
| 40 | M&L for Parking tiles heavy duty vitrified ceramic tiles 30 cm x 30 cm x 10 mm thick , set , jointed and pointed in neat cement slurry over and including 15 mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes in floors , path / hard standing etc with white cement and pigment (Dark shade) complete all as specified and as directed. |
| 41 | M&L, for 60mm thick machine pressed precast concrete interlocking paver block, coloured with glossy finish, any shape and size, M- 35 Grade, with gray cement and pigment complete all as specified and directed. |
| 42 | M&L, for 80mm thick machine pressed precast concrete interlocking paver block, coloured with glossy finish, any shape and size, M- 35 Grade, with gray cement and pigment complete all as specified and directed. |
| 43 | M&L for sand cusioning layer for laying PCC interlocking paver block. complete all as specified and directed. |
| 44 | M&L 100 mm thick cement concrete type B-2 (1:2:4) using 40 mm graded stone aggregates including spike rolling to surface or making in pression of expanded metal, while the concrete is green including forming joints.complete all as specified and directed. |
| 45 | Forming construction joint 30mmdeepx10mm wide filled with sealing compound(grade 'A'). complete all as specified and directed. |
| 46 | Precast cement concrete Kerb stone 7.5cm thick with PCC 1:2:4, using 20mm graded stone aggregate set in CM (1:6) complete fixed in repair complete all as specified and directed. |
| 47 | M& L for 75mm thick PCC 1:3:6 type C-2 (Using 40mm graded crushed stone aggregate) as in plinth protection finished even and fair without using extra cement complete all as specified and directed. |
| 48 | Taking down chowkats or frames with shutters without taking off shutters from the frames, area n.exc 1.50 sqm each and removal to store including cutting holes for removal of hold fast complete all as specified and directed. |
| 49 | Taking down chowkats or frames with shutters without taking off shutters from the frames, area exc 1.50 sqm but n.exc 4 Sqm each and removal to store including cutting holes for removal of hold fast complete all as specified and directed. |
| 50 | M&L for Powder coated aluminium section in door frame ,swing door, sliding window and partition walls complete including connecting accessories like allu grill for guard,fittings, glazing clips, handles, pivots etc fixed complete all as specified and directed. |
| 51 | M&L for Powder coated Anodised aluminium door shutters,aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, handle 2 Nos in each door ,anodised alumnium snap beading, screws etc. complete all as specified and directed. |
| 52 | M&L for Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified and directed. |
| 53 | M&L for Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 54 | S&F for 5.5 mm thick dark coloured glass in aluminium door windows partitions including ped/gasket complete all as specified and directed. |
| 55 | M&L 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed to aluminium door frame complete all as specified and directed. . |
| 56 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 57 | M&L Door closer hydraulically regulated,designation No. 1 universal type,suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed. |
| 58 | S&F for Aluminium Motrice lock, vertical type 75mm size for aluminium doors complete all as specified and directed. |
| 59 | Supply and fixing 100mm long butt hinges extruded aluminum medium weight cold rolled ISI marked. complete all as specified and directed. |
| 60 | Supply and fixing 150mm long extruded aluminum handles fabricated type anodized, ISI marked. complete all as specified and directed. |
| 61 | S&F aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed. |
| 62 | S&F for floor door stopper of aluminum allow body and tongue, 150mm overall length, anodised, with hard drawn steel spring, fixed in floor.complete all as specified and directed. |
| 63 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 64 | S & F framed work such as grills, cooler stand ,grating, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming to Fe 410-0 or Fe 310-0complete all as specified and directed. |
| 65 | M&L for preparation of new steel surface of any description not otherwise described etc 10 cm width or girth and applying two coats of applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer complete all as specified and directed. |
| 66 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings as in roof covering complete all as specified and directed. |
| 67 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to all, th self tapping screws.tapping screws complete all as specified and directed. |
| 68 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to all, th self tapping screws.tapping screws complete all as specified and directed. |
| 69 | S&F 2mm thick Fibre glass reinforced translucent corrugated with two corrugations side lap fixed with coach screw and washer in roof and / plain sheeting in wall cladding / fencing on iron frame etc complete all as specified and directed. |
| 70 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 71 | M&L, Anodised aluminium snap grid with size of grid 605x605mm frame work for false ceiling all as specified (The supporting hanger comprising of mild steel rod, J bolts with necessary bolts, nuts and washers shall be measured and paid for separately)complete all as specified and directed. |
| 72 | M&L, Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long (@ 1 x 1 M).complete all as specified and directed. |
| 73 | S&F, 4 mm thick HPSC pre-primer non asbestos fiber cement building board (E-classic) decorative finish, laminated type fixed to aluminium/ CGI frame work with hold down clips in false ceiling (size 605x605 mm) complete all as specified and directed. |
| 74 | S&F 25mm thick lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick with wood grain printed PVC sheet duly fitted into the wall as per specifications and drawing complete all as specified and directed. |
| 75 | Taking down roof treatment any type any description on top of roof not exc 10cm thick incl removal of rubbish out side MD and complete all as specified and directed. |
| 76 | M&L for PCC 1:2:4 type B0 using 12.5 mm stone aggregate as on top of roof and roof padding benching kerbs of mud stops, rounded or chamfered on edges incl form work complete all as specified and directed. |
| 77 | M&L screed 15mm thick on RCC roof concrete surfaces in CM 1 : 4 mixed with WPC @ 3 % by the weight of cement used and finishing even and smooth without using extra cement.complete all as specified and directed. |
| 78 | Supply only integral water proofing compound complete all as specified and directed. |
| 79 | M&L for applying roof treatment on top of roof with APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabrick incl a coat of bituminous oil based primer (IS: 3884) @ 250gm/sqm laid on primed surface by torch application including priming complete all as specified and directed. |
| 80 | Material & Labour for applying one coat of aluminium paint on app membrane, complete all as specified and directed. |
| 81 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed. . |
| 82 | Demolition and breaking up drain pipes (SGSW, AC or RCC) of internal dia 150mm, set in cement mortar complete all as specified and directed. . |
| 83 | Concrete bed to drain pipes 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D2 using 40mm graded stone aggregate complete all as specified and directed. |
| 84 | Reinforced concrete pipes, class NP2, 150mm bore, laid and jointed complete with collars.complete all as specified and directed. |
| 85 | M & L pre-cast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in man hole cover slabs, of any thickness, size or shape including necessary from work, finished concrete surfaces fair and even in cement mortar complete all as specified and directed. |
| 86 | S&F Precast RCC manhole coverslab of size n.exc 1.00 Sqm area and 100mm thickness,made with cement concrete M20 grade with 8mm dia TMT Reinforcement including removal of broken slab complete all as specified and directed. |
| 87 | M&L for mild steel deforming bar 10 mm dia and over cut to shape required including cranking bending spirally for hooking end and binding with mild steel wire (annealed) not less than 0.9 mm dia. complete all as specified and directed. |
| 88 | Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed. |
| 89 | Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. Please Enable Macros to View BoQ information |
