|
| 1 | M&L for drainging out water from semi undergroung water sadimentation tank of capacity 70000 Gallons scraping out bleachin residual, sediments, sand, fungues scaling etc from inside, bottom and wall of water storage tank with the help of wire brush, steel Patti broom and jute bags and taking out same from the water storage tank and throwing at a distance not less than 25 mtr away from the water storage tank, cleaning inside the water storage tank and then washing and flushing out with fresh water including area cleaning of around the water storage tank all bushes/leafs/shrubs till the entire satisfaction of Engr-in-Charge and writing the date of cleaning on water tank wall with black/white enameld paint complete all as specified and directed by Engineer-in-Charge. (At Main water supply installation Bakloh) |
| 2 | All as per above srl Item No. 1 here in before but 62000 Gallon Capacity water storage tank of complete all as specified and directed by Engineer-in-Charge. (At Main water supply installtion Bakloh ) |
| 3 | All as per above srl Item No. 1 here in before but 50000 Gallon Capacity water storage tank of dome type (appx 5 to 10 cm thick) complete all as specified and directed by Engineer-in-Charge. (At MH Bakloh area and Near SFTS MT area ) |
| 4 | All as per above srl Item No. 1 here in before but 31756 Gallon Capacity water storage tank of size 9m x 6m x 5m (appx 5 to 10 cm thikc) complete all as specified and directed by Engineer-in-Charge. (At Main water supply installtion Bakloh ) |
| 5 | All as per above srl Item No. 1 here in before but Pressure tank of size 2.0m x 1.5m x 2.5m (appx 5 to 10 cm thick) RCC tank including changing of broken tank cover with locking arrangement complete all as specified and directed by Engineer-in-Charge. (At Kuddan nalla to Barari in between tank No 1,2 & 3) |
| 6 | M&L for cleaning of catchment area of water supply at Kuddan nallah with removing stones/ scraping and taking out same from the water storage tank and throwing at a distance not less than 25 mtr away from the water storage tank room, cleaning inside the water storage tank and then washing and flushing out with fresh water including area cleaning of around the water storage tank all bushes/leafs/shrubs till the entire satisfaction of Engr-in-Charge and writing the date of cleaning on water tank wall with black/white enameld paint complete all as specified and directed by Engineer-in-Charge. (At Kuddan Nalla main water source point) |
| 7 | Excavation in trenches for not exc 1.5 mtr wide and not exc 1.5 mtr depth and getting out in Hard/dense/any type soil for laying of GI pipe complete all as specified and directed. |
| 8 | Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified & directed. |
| 9 | Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the Starting point. |
| 10 | Taking up cast iron water mains 150mm bore (inc all fittings) with spigot and socket ends and lead joint including burning out joints and accessories from bakloh cantt area upto bharai area complete all as specified and directed by Engineer-in-Charge |
| 11 | Taking up or down GI Tubing and connections of 150mm dia complete with socket/flanged joint and accessories form bakloh cantt area upto bharai area incl cleanning for re-fixing/ re-laying or remove from site all as specified and directed by Engineer-in-charge. |
| 12 | All as per Item No 11 above but 100 mm dia |
| 13 | All as per Item No 11 above but 80 mm dia |
| 14 | All as per Item No 11 above but 50 mm dia |
| 15 | All as per Item No 11 above but 40 mm dia |
| 16 | All as per Item No 11 above but 25 mm dia |
| 17 | All as per Item No 11 above but 20mm dia |
| 18 | Re-fixing/ re-laying old GI/CI tubing and connections of 150 mm dia with fittings in new/old position incl. bend, elbow, reducer, union, flange, nipple etc complete all as specified and directed by Engineer-in-charge (Note: Rate shall deemed to be include repair/renewal of all running existing connection/ branches from main water supply line, incl T&P used) |
| 19 | All as per Item No 18 above but 100 mm dia |
| 20 | All as per Item No 18 above but 80 mm dia |
| 21 | All as per Item No 18 above but 50 mm dia |
| 22 | All as per Item No 18 above but 40 mm dia |
| 23 | All as per Item No 18 above but 25 mm dia |
| 24 | All as per Item No 18 above but 20mm dia |
| 25 | Supply and laying in trench/fixed on wall/floors galvanized steel water tubing medium grade ISI marked incl all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions etc. of 150mm bore, by re-routing /original position of pipeline complete from Bakloh cantt area upto Kuddan nallah area all as specified and directed by Engineer-in-Charge.Note :- Necessary excavation and earth work shall be measured and paid separately |
| 26 | All as per Item No 25 above but 100 mm dia |
| 27 | All as per Item No 25 above but 80 mm dia |
| 28 | All as per Item No 25 above but 50 mm dia |
| 29 | All as per Item No 25 above but 40 mm dia |
| 30 | All as per Item No 25 above but 25 mm dia |
| 31 | All as per Item No 25 above but 20mm dia |
| 32 | S&F gunmetal globe or gate valve with iron wheel head screwed bolt ends for iron pipe of the sizes 20 mm dia complete incl taking down old gate valves all as specified and directed by Engineer-in-charge. |
| 33 | All as per Item No 32 above but 25 mm dia |
| 34 | All as per Item No 32 above but 40 mm dia |
| 35 | All as per Item No 32 above but 50 mm dia |
| 36 | Supply and fixing in replacement cast iron sluice valve of dia 150 mm dia flanged of class PN 1.6 with iron wheel installed complete with nut bolts, washers of suitable size and pair of rubber gasket of superior quality including taking down unsv sluice vlave all as specified and directed by Engineer-in-charge. Note: Rate shall deemed to be include cutting/disconnecting water supply line, inserting flange/nipple/union/socket as required at site and making good distrubed surface, incl T&P used. |
| 37 | All as per Item No 36 above but 100 mm dia |
| 38 | All as per Item No 36 above but 80 mm dia |
| 39 | All as per Item No 36 above but 65 mm dia |
| 40 | M & L for taking out the existing sluice valve of the following sizes and taking out the worn-out gate and spindle, refixing back the gate and new spindle made out of stainless steel rod of suitable size to fix the existing gate inc check nut regrinding of the gate fixing of nuts & bolts, gaskets etc complete all as specified :- |
| 41 | (a) 150mm bore |
| 42 | (b) 80mm bore |
| 43 | Supply and fixing Ball brass valves high pressure with polythene flote and flynut complete secewed for iron pipe or brass feerrule 20mm dia including taking down u/S valve complete all as specified and directed by Engineer-in-Charge. |
| 44 | M&L for Cutting the existing CI/GI pipe 40/50/65/80/100/150 mm bore or screwing existing CI/GI pipe for addn or altn as required on site including GI fiitings complete all as directed. Note: Necessary earth work shall be measured and paid separately. |
| 45 | M&L for Cast iron bends of Bore upto 150 mm bore (any type,radius and angles) tapers any type (straight, bend, increasing, decreasing or double socket etc) tee pieces, single branch, 'Y' junction double branch, cross, Tail piece (all socket, spigot) collars, caps plughs complete all as specified and directed. |
| 46 | M&L construction of brick masonary valve pit built in cement mortar 1:6 including all excavation and earth work in any type of soil and disposal of surpluse soil to a distance not exc. 50 mtr all as directed by Engineer-in-charge including 10mm thick plastering internally in CM 1:4 and flush pointing in same mortar to brick work externally as work proceeds and cement concrete in foundation PCC (1:4:8) type D-2 15 cm thick & PCC 1:3:6 type C-1 coping, including 75 mm thick & hard core of gauge and exc. 63mm using broken stone /bolder, MS sheet cover 3.15 mm thick MS angle iron frame, handle locking arrangement and painting to steel surfaces including dismantling of old valve pit complete all as specified and directed by Engineer-in-Charge. incl necessary excavation earth work of the following sizes :- |
| 47 | (a) 900 mm x 900mm x 900mm. |
| 48 | (b) 1200mmx1200mmx1200mm |
| 49 | Supply only chlorine chemical test kit in replacement of old u/s kit for testing of water complete all as specified and directed by Engineer-in-Charge.Make: Declibac Tech. Pvt Ltd. or equivalent. |
| 50 | M & L for excavation including returning filling in and all earth work for repair the leakage of CI line lead joint including burning out the old lead joints and repairing including filling the lead as required at site and testing of water main after repairing of 150mm bore complete all as specified and directed. Note : Lead will be measured and paid separately in the relevant Item of BOQ. |
| 51 | Supply only leather buffalo superior quality not less than 3.00mm thick all as specified and directed by Engr-in-Charge. |
| 52 | Supply only GI Flange heavy duty suitable for 150mm bore of pipe complete all as specified and directed. |
| 53 | Supply only carbon steel nut/bols/washers of any size as per sample complete all as specified and directed. |
| 54 | Testing of water sample for water tanks of MH Bakloh, SFTS MT Area, Main water supply insatallation SFTS and Kuddan Nallah, considering all parameters of drinking water as per IS Specification through authorised Govt laboratory and produced to the Engr-in-charge for records. |
| 55 | Supply only white lead as per sample complete all as specified and directed. Please Enable Macros to View BoQ information |
