|
| 1 | Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 2 | M&L for 10 mm thick rendering of Ready Mix Mortar of approved make on brick work or concrete surfaces on internal walls, finished the surface even and smooth without using extra cement as on wall as whole or in patch etc complete all as specified and as directed. Make- Birla (HIL) or its equivalent. |
| 3 | M&L for 15 mm thick rendering of Ready Mix Mortar of approved make on brick work or concrete surfaces on external walls, finished the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and as directed. Make- Birla (HIL) or its equivalent. |
| 4 | M&L for 10mm thick rendering of Ready Mix Mortar of approved make on brick work or concrete surfaces on ceiling, finished the surface even and smooth without using extra cement as on wall as whole or in patch etc complete all as specified and as directed. Make- Birla (HIL) or its equivalent. |
| 5 | M&L for preparing new plastered surfaces and applying two coats of oil bound distemper on wall surfaces including primer and with and including 2mm thick cement base wall care putty complete all as specified and as directed. |
| 6 | Description all as per ser item No 5.00 above but as on ceiling complete all as specified and as directed. |
| 7 | M&L for preparation of new plastered surfaces of wall surfaces and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and as directed. |
| 8 | M&L for preparation of plastered or unplastered old decorated surfaces of wall by brooming down or with steel wire brushing, scraping down, smoke soot's, moulds, moss, efflorescent salts & trading oil, greasy spots and filling cracks/holes with cement base wall care putty and applying one coat of oil bound distemper complete all as specified and as directed. |
| 9 | Description all as per ser item No 8.00 above but on ceiling complete all as specified and as directed. |
| 10 | M&L for complete removal of existing treatment of old decorated surfaces of walls by electrically operated grinder including necessary scaffolding etc, and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 11 | M&L for complete removal of existing treatment of old decorated external surface of walls by electrically operated grinder including necessary scaffolding etc and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and as directed. |
| 12 | M&L for preparation of old painted surfaces of wood & wood based surfaces of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 13 | M&L for preparation of old painted surfaces of steel and iron surfaces of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 14 | M&L for applying 3mm thick cement base wall care putty on old or new wall / ceiling plastered surface to prepare the surface even and smooth complete all as specified and as directed. |
| 15 | Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding and removing debries off the premisis complete all as specified and as directed. |
| 17 | Demolition of brick work or stone buillder built in cement mortar of any description complete all as specified and as directed. |
| 18 | Demolition of stone slab and tiles of any description or thickness in floors aprons complete all as specified and as directed. |
| 19 | M&L for brick work with sub class B works, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed. |
| 20 | M&L for 25mm thick cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in floor etc complete all as specified and as directed. |
| 21 | M&L for glazed ceramic coloured tiles in vertical surface of size (450x 350)mm x 7mm thick /(350x250)mm x7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10 mm thick rendering CM (1: 4) as on vertical surfaces such as skirting, dados, etc complete all as specified and as directed. |
| 22 | M&L for non- skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 23 | M&L for joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but n exc 0.18 Sqm as in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete with and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 24 | M&L for joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but n exc 0.18 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering CM (1: 4) as on vertical surfaces complete all as specified and as directed. |
| 25 | M&L for vitrified tiles light shade 8 to 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 26 | Description all as per ser item no 25.00 above but in vertical surface of wall, skirting over and including 10 mm thick rendering of CM (1: 4) complete all as specified and as directed. |
| 27 | M&L for 20(+ -2mm) thick Granite (of jet black ) work (table rubbed and polished ) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. Note:- Exposed edges of granite shall be half round moulding without any extra cost. |
| 28 | M&L for 75mm thick cement concrete (1:3:6) type C2 (using 20mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with bitumen 85/25 and sand in the proportion of (1:3 ) by weight complete all as specified and as directed. |
| 29 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and as directed. |
| 30 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm nut n exc 4.0 sqm each complete all as specified and as directed. |
| 31 | Taking down shutter of any discription area n. exc 1 Sqm each complete all as specified and as directed. |
| 32 | Description all as per ser item No 31.00 but area exc 1 Sqm but not exc 2 Sqm each complete all as specified and as directed. |
| 33 | M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 34 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stliles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing complete all as specified and as directed. |
| 35 | M&L for pressed steel frame for door with one rebated of size 105 x 60 mm including necessary fixing lugs, hinges , lock strike plate etc complete all as specified and directed |
| 36 | M&L for pressed steel frame for door with double rebated of size (125 x 60)mm including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed. |
| 37 | M&L for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in back filing to pressed steel frames etc, complete all specified and as directed. |
| 38 | M&L for 35mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 39 | M&L for 35 mm thick 2nd class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, provided with stiles and rails as specified in SSR Part-I Section-8 clause 8.20 (a) fixed to chowkats complete all as specified and directed. |
| 40 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and and average width of aperture not more than 1.40mm fixed with stainless steel wire staples complete all as specified and as directed. |
| 41 | S&F butt hinges, 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed. |
| 42 | S&F 150mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 43 | S&F cast type anodised aluminium handles of size 150 mm complete all as specified and as directed. |
| 44 | S&F in repair MS powder coated 20 mm dia curtain rod including brackets and end knobs / fineals complete all as specified and as directed. |
| 45 | S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and as directed. |
| 46 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 47 | S&F powder coated aluminium window and ventlator shutters with side hung, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing cips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and as directed. |
| 48 | S&F anodised aluminium powder coated door shutter, aluminium section wt 0.55 Kg/m including neccesary joining cleats, glazing clips, rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading, screw etc. complete all as specified and as directed. |
| 49 | S&F aluminium powder coated three track sliding window with mosquito net two track for glass leaf sliding and one track for mesh leaf sliding outer frame weighing 0.699 Kg/m, (75x26) mm size equivalent Jindal model 20671, shutter plain of size (37.5x15)mm weighing 0.366 Kg/m, Section No 20690 Jindal), with powder coating of min thickness 50 micron with one or more rebates, sliding type without sash bars, 5mm thickness double tampered clear glass, rubber packing, snap beading screws, with horizontal sliding type with stainless steel mesh, frame, powder coated aluminium grill type AL 925 or equivalent grill, cutting in suitable size and fitting with screws and suitable beadings to aluminum window frame complete all as specified and as directed. |
| 50 | S&F mild steel work in framed work such as grills, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work conforming to Fe 410 -0 or Fe 310 -0 complete all as specified and as directed. |
| 51 | S&F 5.50mm thick tinted, sheet glass of selected quality fixed to aluminium frame work complete all as specified and as directed. |
| 52 | M&L for preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 53 | Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 54 | Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 55 | S&F tubes, 'medium grade' 15mm bore galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 56 | Description all as per ser item No 55.00 above but 20mm bore pipe complete all as specified and as directed. |
| 57 | S&F in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, fancy type, long/ short body, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 58 | S&F in repairs of sink with drainage board, made out of stainless steel 1mm thick, kitchen or laboratory with plugs, washes and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size (915X460)mm with bowl size (410X330)mm X 160mm complete all as specified and as directed. |
| 59 | S&F in repair cast copper alloy CP soap dish complete all as specified and as directed. |
| 60 | S&F in repair cast copper alloy CP towel ring complete all as specified and as directed. |
| 61 | S&F in repairs 15 mm two in one angle valve chromium plated with wall flange and fancy type with high pressure, screwed down and with CP flange of same make complete all as specified and as directed. |
| 62 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), and trap white (excluding flushing cistern and seat cover) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc complete all as specified and as directed. |
| 63 | S&F in repairs 15mm bore angle cock, chromium plated, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 64 | S&F in repairs sink mixer with swivel spout and 450 mm long braided houses chromium plated complete all as specified and as directed. Make -SOL-6319B of jaquar or equivalent in kohler/Marc. |
| 65 | S&F in repair basin mixer with popup waste system, hot and cold facilities and 450 mm long braidaed hoses chromium plated complete all as specified and as directed. Model No- DRC-37005 B of make Jaquar or Kohler/Marc. |
| 66 | S&F in repairs three way wall mixer with popup waste system, hot and cold facilites and 450 mm long braidaed hoses chromium plated complete all as specified and as directed. Make:- FUS-29273 UPR of Jaquar or Kohler/Marc. |
| 67 | S&F in repair health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and as directed. |
| 68 | S&F in repair cast copper alloy CP paper holder complete all as specified and as directed. |
| 69 | S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges including chromium plated brass screw and plastic cleats, (minimun weight 190 gms) complete all as specified and as directed. |
| 70 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm and fixed complete all as specified and as directed. |
| 71 | S&F in repair plastic water closet seat cover, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 72 | S&F in repair PVC valveless, syphonic action type, flushing cistern low level, 10 litre capacity, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed. |
| 73 | S&F in repair brass chromium plated shower rose 125 mm size fixed to 15 mm bore iron pipe complete all as specified and as directed. |
| 74 | S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket gurard and railing 60cm long tixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 75 | S&F in repair (600 x450)mm fancy type or bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 76 | S&F in repairs cast iron floor trap with CP grating including jointing to waste pipe with run lead, dia of outlet 100mm set in cement concrete type B1 (1:2:4) complete all as specified and as directed. |
| 77 | Demolition and breaking up drain pipe 75/100mm dia (salt glazed ware, AC or PVC) of any type complete all as specified and as directed. |
| 78 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified and as directed. |
| 79 | S&F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified and as directed. |
| 80 | S&F in repair PVC (SWR) bends any radius, 75 mm bore complete all as specified and as directed. |
| 81 | S&F in repair PVC (SWR) bends any radius, 110 mm bore complete all as specified and as directed. |
| 82 | S&F in repair corner glass shelf set of 3 Nos with bracket complete all as specified and directed. |
| 83 | S&F in repairs, wash hand basins vitreous china flat back 450mmx300mm size white, first quality, with and including chromium plated waste coupling 32mm size, PVC waste pipe 25mm bore heavy duty China and plug and porcelain stopper, brackets of mild steel angle iron (35mmx35mmx5mm) of suitable size including two coats of synthetic enamel paint over a coat of primer over angle iron brackets complete all as specified and as directed. |
| 84 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description over 10cm width including preparation complete all as specified and as directed. |
| 85 | Demolition of PCC of any discription and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 86 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in kerbs or mud stops, rounded or chamfered edges, etc complete all as specified and as directed. |
| 87 | M&L for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etc complete all as specified and as directed. |
| 88 | M&L 60mm thick machine pressed with grey cement and no pigment interlocking factory made paver blocks of any size and shape conforming to IS 15658-2006, M-35 set, with and including over 25 mm thick dry sand cushion complete all as specified and as directed. |
| 89 | S&F in repair steel rolling shutters, 1.25 mm thickness of lath, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete with push/ pull or manual type complete all as specified and as directed. |
| 90 | S&F in repair factory made 18 mm (+0.7 mm ) thick celuka PVC ply of density 600 kg/cbm manufactured by an ISO 900-2008 certified company. One side prelame and other side plain 18 mm thick celuka PVC Ply for kitchen cabinet/ cupboard shutter complete all as specified and as directed. |
| 91 | S&F in repair factory made 18 mm (+0.7 mm ) thick celuka PVC ply of density 600 kg/cbm manufactured by an ISO 900-2008 certified company one side plain 18 mm thick celuka PVC Ply for shelves/partions/drawers complete all as specified and as directed. |
| 92 | S&F 100 mm size stainless steel handle complete all as specified and as directed. |
| 93 | S&F 50 mm magnaetic catches with brass body and striking plate including letting in as fixed complete all as specified and as directed. |
| 94 | S&F 50 mm size stainless steel continuous piano hinges complete all as specified and as directed. |
| 95 | S&F 40 mm stainless steel nobs complete all as specified and as directed. |
| 96 | S&F stailess steel telescope channel of size 500mm complete all as specified and as directed. |
| 97 | S&F stainless steel thali basket fo size 550mm x 600mm x 200mm Grade -304 complete all as specified and as directed. |
| 98 | S&F stainless steel basket fo size 550mm x 600mm x 200mm Grade -304 complete all as specified and as directed. |
| 99 | M&L for vitrified tiles light shade 8 to 10 mm thick (square/ rectangular) polished, area of each tile exceeding 0.42 sqm and not exc 1.00sqm each in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 100 | Description all as per ser item no 99.00 above but as in vertical surfaces of wall, skirting over and including 10 mm thick rendering of CM (1: 4) complete all as specified and directed. |
| 101 | M&L for machine cut Kota stone slab 20 to 25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including 20 mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 102 | M&L for machine cut Kota stone slab 20 to 25 mm thick as in steps, skirting, dado and pillar, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including 15mm thick rendering CM (1:4) complete all as specified and as directed. |
| 103 | M&L for 40mm thick cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in flooring, surface finished even and smooth with using extra cement complete all as specified and as directed. |
| 104 | S&F in repair 500 litres capacity three layered rotational moulded polyethene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. |
| 105 | S&F in repair 1000 litres capacity three layered rotational moulded polyethene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. |
| 106 | S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. |
| 107 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 108 | S&F steel work in tubular/square/rectangular hollow section/angle iron, tee etc. for trusses/ purlins & rafter including special shaped washer etc. complete using ERW or induction butt welded tubes using Fe as per IS 4923, Grade YST 310 including necessary machinery for upto 10m height structure complete all as specified and as directed. |
| 109 | Dismantling AC/CGI corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 110 | S&F 0.50mm thick Pre-painted galvalume aluminium zinc coating steel GI based corrugated sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self taping screws complete all as specified and as directed. |
| 111 | Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and as directed. |
| 112 | Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 113 | Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
