|
| 1 | Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge |
| 2 | Material and labour for Waterproofing treatment to sunken floor using acrylic based multipurpose polymer. The treatment shall be carried out as per manufactures specification. The treatment shall be include of the following elements also: 1. Surface preparation of substrate by removing all traces of contaminates, loose and friable particles, cement laitance oils and grease, water repellent coatings etc2. Injection grouting using cementitious grout if required. The payment for injection grouting shall be made separately etc3. Repair to the substrate, filling of blow holes/voids and surface leveling using appropriate products specified by the manufacture.4. All intersections of horizontal and vertical surface should be profiled with a mortar fillet of minimum 25mm x 25mm.5. The moisture content of the substrate shall be checked before application of first coat at water proof coating at the rate of 200 g/m2 followed brush topping at 450g/m2 per mm. The second coat shall be reinforced with glass fabric between the first and second coat.6. The treatment shall be protected by application of polymer modified cement mortar of thickness 10mm applied at the rate of 50g per mm.7. Tech specification : Tensile adhesion strength 0.5N/Sqmm (as bonding slurry). |
| 3 | Material and labour for Aerated Autoclaved Concrete (AAC) blocks work according to Indian Standard specification IS:2185(Part-3)-1984 and latest revision built in Cement and sand mortar 1:6 with Aerated Autoclaved Concrete (AAC) blocks straight or curver on plan exceeding 6mtr Mean radius as in sunken floor complete all as specified and and as directed by Engineer-in-charge. |
| 4 | Demolition of cement concrete reinforced of any discription and in any position, including reinforcement cut as required to facilitate and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge. Note:The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill. |
| 5 | Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) |
| 6 | Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed by Engineer-in- charge.(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose) |
| 7 | Material and Labour for Reinforced cement concrete (nominal mix) in Beams, cantilevers, bressummers, lintels over 1.5 m span Type B1 1:2:4 (20 mm graded aggregate) all as specified and directed by Engineere-in-charge |
| 8 | Material and Labour for Reinforced cement concrete, Nominal Mix,1:2:4, Type-B1, using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including proper compaction by using mechanical viberator complete all as specified and directed. NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule. |
| 9 | Demolition of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge |
| 10 | Material and Labour for anti slip coloured ceramic tiles 7 to 8mm thick (square/rectangular) of Size 400mmx400mm Sqm in floors and Skirting etc. including 10 mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile including necessary cutting as per site requirement complete all as specified and as directed by Engineer-in-charge. |
| 11 | Material and Labour for glazed ceramic coloured tiles 9.5 mm to 10.5mm thick 600mm x 300mm size in verticle surface including 10mm thick backing coat using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement etc complete all as specified and as directed by Engineer-in-charge. |
| 12 | Supply and fixing in repairs 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plqated, fancy type, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr In Charge |
| 13 | Supply & fixing in repair of 600 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge. |
| 14 | Supply & fixing in replacement of Stop valve / angle valve , cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule for 15 mm bore of pipe complete all as specified and as directed by Engineer-in- charge. |
| 15 | Supply & Fixing in repair brass chromium plated shower rose 70 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed by Engineer-in-charge. |
| 16 | Supply & Fixing in repairs 15 mm dia bore chromium plated quarter turn concealed stop valves of cast copper alloy fancy type with long shank & cup etc. complete all as specified and as directed by Engineer-in-charge. |
| 17 | Supply & Fixing in repair 15 mm dia ISI Mark bore chromium plated long body with wall flanges bib taps cast copper alloy, screwed for iron pipe, or for brass ferrule complete all as specified and as directed by Engineer-in-charge. |
| 18 | Supply and fixing in repair Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified & directed by Engineer-in-charge. |
| 19 | Supply and fixing long neck PVC SWR Type-B P trap size 32 mm bore, 300 mm long Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed in position complete all as specified & directed by Engineer-in-charge. |
| 20 | Taking up or down Steel/PVC tubing 15 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified & directed by Engineer-in-charge. |
| 21 | Taking up or down Steel/PVC tubing 20 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified & directed by Engineer-in-charge. |
| 22 | Supply and Fixing 16 mm bore CPVC pipe SDR 11 with and including CPVC SDR 11 fittings and fixed to walls & ceilings or laid in floors, including taking down unservicable existing GI tubing of 16 mm bore and fittings complete complete all as specified and as directed by Engineer-in-charge. |
| 23 | Supply and Fixing 20 mm bore CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, including taking down unservicable existing GI tubing of 20mm bore and fittings complete all as specified and as directed by Engineer-in-charge. |
| 24 | Taking down CI/AC/PVC soil waste and vent pipe any radius including all fitting complete all as specified and as directed by Engineer-in-charge. |
| 25 | Supply and Fixing 110 mm bore of pipe PVC (SWR) type B pipes single socket 6 Kg/Sq cm in any length with Stack clamps made out of 50mm by 5 mm flat iron and 16mm dia round iron as shown in BTD Drg No. 916 sheet 1/4 to 4/4 and BTD-917 sheet sheet 1/1 of stays, including bolts and nuts and securing ends of stays to wall at a distance of 100-120mm away from walls complete all as specified and as directed by Engineer-in- charge. including Taking down old AC eaves gutters and rainwater pipes ( of any size and pattern), including all fittings, compete all as specified and as directed by Engineer - in-charge. |
| 26 | Supply and Fixing 110 mm bore, PVC (SWR) fittings Type -B such as bends, tee, shoe etc; fixed to PVC pipes, compete all as specified and as directed by Engineer - in-charge. |
| 27 | Supply and fixing in repair 110 mm dia of PVC SWR Type B P trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregates compete all as specified and as directed by Engineer - in-charge. |
| 28 | Supply and Fixing in repair 110mm dia of long neck PVC SWR Type-B, floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1, using 20mm graded stone aggregates complete complete all as specified and as directed by Engineer-in-charge. |
| 29 | Supply & Fixing in repairs Branch pieces, PVC SWR Type B single 110 mm bore, equal or unqual, (Y, T, etc) complete all as specified and as directed by Engineer-in-charge. |
| 30 | Material and Labour for in repair vitreous china wash down water closet pan wall hanging single piece (with and including flushing cistern EWC) 'P' trap, with and including white coloured closed pattern plastic seat cover, hand faucet , with and including mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in- charge. |
| 31 | Supply and fixing in repairs PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and as directed by Engineer-in-charge . |
| 32 | Supply and fixing Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60 gms) complete all as specified and as directed by Engineer-in- charge. |
| 33 | Material and Labour in repairs Vitreous China Urinal, full stall type, white, including connections to flushing pipe and outgoing pipes , including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating, PVC bottle trap, as approved by GE including CP urinal spreader and CP connection etc complete all as specified and directed by Engineer-in- charge. |
| 34 | Supply & fixing wash hand basin oval type of size not less than 550mm x 400 mm , table top fancy including 32mm dia Chromium plated waste coupling, waste pipe, PVC connection and all necessary fittings vitrous China white flat back including brackets, waste coupling & PVC Waste Pipe of 32mm dia etc complete all as specified and as directed by Engineer-in-charge . |
| 35 | Supply & fixing Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed by Engineer-in-charge . |
| 36 | Supply and Fixing bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood with aluminium frame 15 mm x 15 mm, fixed to wooden plated brass screws and cup washers, including fancy type PVC beading around complete all as specified and as directed by Engineer-in- charge. |
| 37 | Supply & fixing Soap dish, vitreous China white, ap proximate size 160mm x 160mm x 90mm complete all as specified and as directed by Engineer-in- charge. |
| 38 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm each as doors, windows and ventilators and removal from site complete all as specified and directed. |
| 39 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each each as doors, windows and ventilators and removal from site complete all as specified and directed. |
| 40 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame / Chowkhat of Size 45mm x 70 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length with and including Supply and Fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges complete all as specified and as directed by Engineer-in- charge. |
| 41 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm thick , size comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm modulus of elasticity 850N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retardant and with and including Supply & Fixing of 02 Nos (per Leaf) SS 150mm long Tower Bolt, Supply & Fixing of 02 Nos (per door) SS 300mm long Sliding Bolt with and including Supply & Fixing of 02 Nos (per Leaf) Stainless Steel 150mm long handle complete all specified and directed by Engineer -in-charge. |
| 42 | Supply and Fixing 4mm thick Figured glass pin head type , in squares, exceeding 0.50 sqm in each pane, wooden beading fixed with nails including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds and complete all as specified and as directed by Engineer-in- charge. |
| 43 | Supply and fixing factory made uPVC white colour casement (Openable) window (Area exceeding 1.00 sqm but not exceeding 2.00 sqm each) made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 44 | Supply and fixing factory made uPVG white colour Sliding window 2.00 Sqm Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connectedaccessories. Net Opening will be measured for payment purpose.) |
| 45 | Material and labour Granite (of any type) work (table rubbed and polished) as in steps, pillars,win dow-cills, cooking platforms and like in laid over and including 15 mm thick screed in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and roundening to the edge of stone slabs on edges etc. complete all as specified and as directed by Engineer-in-charge. |
| 46 | Supply & fixing Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed by Engineer-in-charge. |
| 47 | Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified & directed by Engineer-in- charge. |
| 48 | Material and labour for 10mm thick Rendering in Cement mortar 1:6 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing of brick work or concrete surfaces of walls and finishing even & smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 49 | Material and labour for applying wall care putty (1.5mm thgick) in two layers on wall surface and smoothening the surface with sand papers / Mechanised sanding etc preparatory to paint and two coat of acrylic emulsion distemper of approved tint over a coat of primer prepared surface by using Airless spray/Roller complete all as specified and as directed by Engineer-in-charge. |
| 50 | Material and Labour for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as in ceiling and finishing the surface even & smooth complete all as specified and as directed by Engineer-in- charge. |
| 51 | Material and labour for rendering/plastering 15mm thick (matching with existing plaster thickness) in cement mortar (1:3) on any face of ceiling in patches matching with existing, finished fair and even and smooth without using extra cement, including taking down complete all as specified and as directed by the Engineer-in-Charge. |
| 52 | Material and Labour for Drilling Holes of 12mm dia up to 100 mm deep holes in slab at the interval of 300 mm or as directed by Enginner-in-charge in staggered manner or along the crack line in Reinforced Concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm dia NRV (Non Returnable Valve) nozzle compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fix inside the hole by applying thixotropic epoxy adhesive to ensure complete sealing and allow curing the system for minimum of 8 Hrs before Grouting including nozzle projections, excess putty, if any, over concrete element by grinding, leveling and finishing the external surface, after completion of the work, etc. complete all as specified and as directed by Engineer-in-charge. |
| 53 | Supply and Grouting, injecting two part, low viscosity, moisture insensitive injection liquid, based on high strength epoxy resin by pressure and using pressure epoxy injector with accessories till nozzle refused to accept the grout including mixing of grout for column, beam and roof slab having following properties:- (i) Mixed Density 1.1 kg/l (at +27°C); Viscosity ~ 250 mPas at +30°C and should comply according to ASTM C 881, Type II and IV, Grade-1, Class E+F (ii) Compressive strength >= 70 N/sqmm (7 days) according to ASTM D 695; Tensile Strength >= 30 N/sqmm (after 7 days at +30°C cure) (According to ASTM D 638); (iii) Bond Strength ~ 10.8 N/sqmm (failure in concrete) after 14 days at +30°C cure; Flexural strength ~ 50 N/sqmm according to ISO 178. (iv ) Seal the nozzle with thixotropic epoxy adhesive after the refusal of grout material from the nozzle. Note:- leakage through other nozzle or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost complete all as specified and as directed by Engineer-in-charge.Note :- Mode of measurement: per kg of material consumed. |
| 54 | Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description complete all as specified and as directed by Engineer-in-charge. |
| 55 | Material and labour for Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6.0m mean radius built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge. |
| 56 | Material and labour for PCC 1:4:8 , Type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed by Engineer-in-charge. |
| 57 | Material and labour for PCC 1:2:4 , Type B-1 using 20 mm graded stone aggregate at manhole bedding and coping complete all as specified and as directed by Engineer-in-charge. |
| 58 | Material and labour for Rendering 15mm thick in cement mortar in 1:4 on other than fare face of brick work or concrete surfaces even and smooth with using extra cement with using integral water proofing compound complete all as specified and as directed by Engineer-in-charge.Note : WPC shall be measured and paid separately. |
| 59 | Material and labour for plastering 15mm thick in cement mortar in 1:4 on other than fair face of brick work or concrete surfaces finished even & smooth without using extra cement (external surface) complete all as specified and as directed by Engineer-in-charge. |
| 60 | Supply only liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge. |
| 61 | Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter depth for foundation etc or for shafts , wells, cesspits, manholes , septic tank, for laying of cables , laying of pipes not exceeding 10 Sqm on plan and not exc 1.5 meter depth and getting out in soft/loose soil etc complete all as specified and as directed by Engineer-in- charge. |
| 62 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete)of any dia set in cement laid in trenches incl all fittings & accessorises complete all as specified and as directed by Engineer-in- charge. |
| 63 | Supply and laying DWCPE (SN 8) drain pipes 150 mm nominal dia as per IS-16098 (Part-II), laid in trenches on bed including all accessories/ fittings/ jointed ring, jointing and testing complete all as specified and as directed by Engineer-in- charge.Note:- Excavation , earth work, bedding and pedestal / anchorage if required shall be measured and paid separately under appropriate item of BOQ/ Sch 'A' |
| 64 | Supply and laying DWCPE (SN 8) drain pipes 200 mm nominal dia as per IS-16098 (Part-II), laid in trenches on bed including all accessories/ fittings/ jointed ring, jointing and testing complete all as specified and as directed by Engineer-in- charge.Note:- Excavation , earth work, bedding and pedestal / anchorage if required shall be measured and paid separately under appropriate item of BOQ/ Sch 'A' |
| 65 | Material and Labour for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for Internal dia of pipe in 150 mm complete all as specified and as directed by Engineer-in-charge. |
| 66 | Returning filling in any type of soil, including spreading, levelling,watering and well ramming in layer not exceeding 25 cm in each layer, complete all as specified and as directed by Engineer-in- charge. |
| 67 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by Engineer-in- charge. |
| 68 | Taking down carefully copper /aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem , sheet switches, ceiling rose, pendent holder , sockets, fan regulator , bell push, Electronic bell , sunken box except concealed conduit etc. complete all as specified and directed by Engineer-in-charge. Notes:(i) The weight of aluminium scrap , copper scrap and Iron scrap shall be ascertained by BOO as ordered by GE and same duly countersinged by GE shall be enclosed with final Bill. (ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface shall be measured and paid seperately under serial item no. 69.00, 69.01.00, 69.02 of BoQ. |
| 69 | Material and labour point wiring for one light / fan point controlled by 6 amps one way modular switch switch with 2.5 Sqmm PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in and including concealed PVC conduit 20 mm dia heavy duty ISI marked, steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface including PVC insulated unsheathed 2.5 sqmm copper conductor cable FR-LSH connected to common earth dolly independent including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed by Engineer-in-charge. (Note:- Switches, sockets etc shall be measured and paid for separately under items of Schedule). |
| 70 | All as per item No 69.00 here- in -before but for one 3 Pin Socket outlet 6 Amp, on same board complete all as specified and as directed by Engineer-in- charge. |
| 71 | All as per item No 69.00 here- in -before but for one 3 Pin Socket outlet 6 Amp, on Independent board complete all as specified and as directed by Engineer-in- charge. |
| 72 | Supply and fixing Modular Switch one way , 6Amp/10Amp ,1 module, Single pole, 230 volts ,AC supply, ISI marked , complete all as specified and directed by Engineer-in-charge |
| 73 | Supply and fixing Modular Socket outlet , 6 Amp-2/3 pin combined 2 module , 230 volts , multipurpose, AC supply, ISI marked complete all as specified and directed by Engineer-in-charge. |
| 74 | Supply and Fixing LED Panel Light fitting recessed mounted,square shaped of size 595mm x 595mm x 65mm , 36 (±10%) watt, efficacy not less than 90 lumen/watt , extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete as per manufacturer's instructions with and including connection with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as specified and as directed by Engineer-in- charge. |
| 75 | Material and labour in replacement Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with and including single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH for earth wire in existing PVC concealed conduit (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and directed by Engineer-in-charge. Notes:-(a) Three single core 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade shall be measured as one length. |
| 76 | Supply and fixing in replacement sheet metal encloser double door 4 way SPN 240V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet factory made including blanking plate for unused module complete all as specified and directed by Engineer-in-charge |
| 77 | Taking down old complete and supply and fixing of SP MCB 6-32 Amp, 240 Volt 10 KA 'C' series complete all as specified and as directed by Engineer-in- charge. |
| 78 | Taking down old complete and supply and fixing of SPN MCB 40-63 Amp, 240 Volt 10 KA 'C' series complete all as specified and as directed by Engineer-in- charge. |
| 79 | Supply and Fixing Exhaust fan 300mm sweep (Heavy duty) steel body, BEE, 5 star rated ,AC Supply, single phase ,230 volts, 50HZ,1200RPM with and including frame including new mosquito stainless steel wire mesh of guage 0.36mm with suitable wooden frame protection against birds etc. mounted in suitable opening arrangmement in wall and electric connection with and including three core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm drawn in flexible PVC Conduit and hanging on wall with 04 Nos. steel fastners 10mm dia 100mm long with and including serial number of fan as issued by Engineer-in-charge and GE office name with red colour permaent marker complete all as specified and directed by Engineer-in-charge. |
| 80 | Material and Labour for Cutting holes in brick walls built in cement mortar (not exceeding half brick) for inserting hold fast and making good dismantled portion in CM 1:3 or Cement concrete 1 : 2 : 4 , type B1 as required , depth of embedded portion exceeding half brick walls and not exceeding one brick of hold fast or lugs measured from the face of the jamb into walls complete all as specified and as directed by Engineer-in- charge. Please Enable Macros to View BoQ information |
| 81 | Material and Labour for Cutting holes in brick walls built in cement mortar (not exceeding half brick) for inserting hold fast and making good dismantled portion in CM 1:3 or Cement concrete 1 : 2 : 4 , type B1 as required , depth of embedded portion exceeding half brick walls and not exceeding one brick of hold fast or lugs measured from the face of the jamb into walls complete all as specified and as directed by Engineer-in- charge. Please Enable Macros to View BoQ information |
