|
| 1 | M & L for Scarifying or picking gravelled exc. 50mm but n. exc. 100mm deep, macadam or bituminous macadam surfaces in area exc 400 sqm complete all as specified and directed. |
| 2 | Laying and compacting 75 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as pe table 400-13 of MaRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with wate to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1 OOKN static weight and consolidating to required gradien and camber complete all as specified and directed The finished surface tolerances to be as per Table 900-1 of MaRTH specifications for Road and Bridge works 2013 complete all as specified and directed. |
| 3 | M & L for applying evenly a priming/tack coat with paving bitumen VG-10 primer @ 10 Kg per 10 Sqm complete all as Specified and directed. |
| 4 | Material & labour for pre-mix bituminous macadam with 4% binder content by weight of total mix laid/rolled and compacted to required gradiant and camber (consolidated thickness 75mm or less with 8 to 10 ton power roller complete all as Specified and directed (Mix shall be from hot mix plant and spreading shall be with mechanical paver). |
| 5 | M & L for applying evenly a priming/tack coat with paving bitumen VG-10 primer @ 5 Kg per 10 Sqm complete all as specified and directed. |
| 6 | M & L for Bituminous premixed semi dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix rolled and compactyed to required camber and gradient complete prepared in hot mix plant and spread with mechnical paver and rolled with 8 to 10 tonne roller complete all as specified and directed. |
| 7 | M & L for preparing bituminous surfaces of road and marking 1mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 8 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc all as specified and directed. |
| 9 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. |
| 10 | M&L for cement concrete type D-2, 1:4:8 using 40mm graded stone aggregate as in subbase complete all as specified and directed. |
| 11 | M&L for Sand filling under floors for cushioning of including watering and consolidation complete all as specified and directed. |
| 12 | M & L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed. |
| 13 | M & L for Providing, cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) in cills, steps; seismic and other similar bands, plinth courses copings including necessary form work complete all as specified and directed. |
| 14 | M&L for Stone kerb of roughly squared stones of size 15cm x 30cm, all surfaces hammer dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 20mm jointed in cement mortar 1:6 and struck flus complete all as specified and directed. |
| 15 | M & L for preparation of new surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel on kerb stone (ordinary tint) complete all as specified and directed. |
| 16 | M & L for 8-10 mm thick dark shed endura parking tile (square/rectangular) area of each tile exc 0.09 Sqm but not exc. 0.16 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified and directed. S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 Please Enable Macros to View BoQ information |
