Tender For Repairing And Rewinding Of 17.5 H.P./ 20 H.P. 3 Phase, 440 Volt Squirrel Cage Induction Electro Motor For Maintenance Of Different Rli Schemes Under Memari(Agri-Mech) Sub-Division Under Burdwan (Agri-Mech) Division Under Non Plan In The Di, Memari-West Bengal
TDR : 56000685
Tender Notice
BOQ
5 Days Left
Memari
West Bengal
Tender For Repairing And Rewinding Of 17.5 H.P./ 20 H.P. 3 Phase, 440 Volt Squirrel Cage Induction Electro Motor For Maintenance Of Different Rli Schemes Under Memari(Agri-Mech) Sub-Division Under Burdwan (Agri-Mech) Division Under Non Plan In The Di
Name of Work:- Repairing and Rewinding of 17.5 H.P./ 20 H.P. 3 phase, 440 Volt Squirrel cage Induction Electro Motor for Maintenance of different RLI schemes under Memari(Agri-Mech) Sub-Division under Burdwan (Agri-Mech) Division under Non Plan in the District of Purbo Bardhaman.
Sl. No.
Item Description
1
Repairing and Rewinding of 17.5 H.P./ 20 H.P. 3 phase, 440 Volt Squirrel cage Induction Electro Motor for Maintenance of different RLI schemes under Memari(Agri-Mech) Sub-Division under Burdwan (Agri-Mech) Division under Non Plan in the District of Purbo Bardhaman. Please see the details in Sheet Rewinding BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Executive Engineer (A-M) , Burdwan (A-M) Division Name of Work: Repairing and Rewinding of 17.5 H.P./ 20 H.P. 3 phase, 440 Volt Squirrel cage Induction Electro Motor for Maintenance of different RLI schemes under Memari(Agri-Mech) Sub-Division under Burdwan (Agri-Mech) Division under Non Plan in the District of Purbo Bardhaman. Contract No: WBWRDD/EEAM/BDN/eNIT-01 (Sl. No. 01-05)/ NP / 2026-27, Sl No-05. Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) SL No Description of Item Qty Unit Rate Amount(Rs.)
2
(a) Dismantling of different H.P 3 Phase 380-400 Volt 1440 RPM, 4/3 pole 50 cycle for induction motors, removing old burnt out coil from slots carefully, segregating all the parts, washing and cleaning the same thoroughly for verification of serviceable and unserviceable parts as per direction of E.I.C. (ii) for 17.5/20 HP 3 phase Induction Motor.
3
Rewinding of approved quality Super Enamel copper winding wire of standard gauge as provided by motor manufacturer including slot insulation as per Indian Electrical Rules soldering the cable joint properly taping with 660 v grade water proof tape making new loop terminal, heating and varnishing with Class-E golden Varnish (Johnson & Nicolson Make) so as to develop original rated RPM, supplying all necessary materials as mentioned above and reassembling the 17.5/20 HP, 3 Phase, 1440 RPM, 50 Hz, 440 Volts Induction Motor.(WRDD elec. sh. chapter 4 Page-1 of 7,item -2 )(b) 17.5 H.P / 20H.P 3 Phase 415 votls, 50 Hz 2 / 4 pole induction Motor.
4
(i) Supply of super enamelled dual coated copper wire conforming IS 13730, 1996, part 13 (16 swg to 22 swg)Required max. weight of super enamelled copper wire is given below:1) Elmech/G.E.C(New) / Crompton/N.E.C/Kirloskar - 10.2kgs. 2) Bicco/ A.E.I -13.1 Kgs.3) G.E.C (old) - 16.2 Kgs. 4)Kirloskar(New)-9.5 kg. &10.5 Kg. 5)Kirloskar (Old)- 12 Kgs. 6) Crompton (Old)-12.5 Kg. 7) NGEF-10.5 Kgs.
5
(ii) Labour charge for rewinding , soldering, heat varnishing, bearing changing, reassemling etc. including supply of all materials excluding bearing as mentioned above complete in all respect as per direction of E.I.C
6
Labour charge for checking up the dynamic balance of the motor shaft for original allignment as per direction of E.I.C
7
Testing of repaired motor by continuous 8 hours running on load as per direction of E.I.C. Item wise total 209664.0
8
Add GST @18% on all Items
9
Add Cess @1% on all Items.
10
Deduction towards dismantled burnt enamelled copper wire from induction motor on the basis of actual measurement to be retained by the agency. (Note in case of PVC insulated copper wire to arrive at net burnt weight 10% deduction will be made) NB: Contractors premium will be allowed in this item bill should be drawn deducting the actual measurement of burnt coli @Rs 351.00 per Kg. Grand Total Rs. 249877.5 Say Rs. 249878.0 Two Lakh Forty Nine Thousand Eight Hundred & Seventy Eight Only Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
