|
| 1 | Construction of STP at Kanjirapally GP bus stand comfort station |
| 2 | 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 3 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 4 | 2.26.1:Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil |
| 5 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 8 | 5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | 5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 10 | 5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform |
| 11 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 12 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 13 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 14 | 13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) |
| 15 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 16 | 13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm |
| 17 | 4.12:Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification . |
| 18 | 12.47.1:Providing & fixing UV stabilised fibre glass reinforced plastic sheet rooting up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8 mm dia G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovings incorporating minimum 0.3% ultra-violet stabiliser in resin system under approxirnately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.2 mm thick corrugate 2.5\\"or 4.2\\" or 6\\") or step-down (2' or 3\\" or 6\\") as specified. |
| 19 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 20 | 19.16:Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12 mm dia steeel bar conforming to IS:1786, having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) Complete as per design |
| 21 | 19.19.1.1:Providing and fixing in position Pre-cast R.C.C. manhole cover and frame of required shape and approved quality.L D - 2.5Rectangular shape 600x450 mm internal dimensions |
| 22 | OD276908/2023-2024:Coarse sand (Zone III) |
| 23 | OD356934/2024-2025:Stone Aggregate (Single size):10mm nominal size |
| 24 | OD356933/2024-2025:Stone Aggregate (Single size): 6mm nominal size |
| 25 | 19.9.1.1:Constructing brick masonry circular type manhole 0.91 m internal dia at bottam and 0.56 m dia at to[ in cement mortar 1:4 (1 cement : 4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix ( 1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size ), and making necessary channel in cement concrete 1:2:4 ( 1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design:0.91 m deep with S.F.R.C cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to IS: 12592, total weight of cover and frame to be not less than 182 kg, fixed in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately):With cement burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 26 | 50.18.9.10.1:Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2 |
| 27 | 50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 |
| 28 | 50.18.9.22.5:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee |
| 29 | 50.18.9.6.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2 |
| 30 | 50.18.9.4.2:Providing and fixing PVC pipes includings joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm dia 6 Kgf/cm2 |
| 31 | OD283661/2023-2024:Providing & fixing CPVC pipes as Air blower header including jointing of pipes with step welded joints, supporting & testing of joints as per direction of engineer in charge 63mm dia 6Kgf/cm2 |
| 32 | 50.18.9.20.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow |
| 33 | 50.18.9.3.2:Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2 |
| 34 | OD283741/2023-2024:Providing & fixing PVC moulded fittings/accessories for rigid PVC pipes, including jointing with PVC solvent cement - 50mm dia Elbow |
| 35 | OD283804/2023-2024:Providing & fixing PVC moulded fittings/accessories for rigid PVC pipes, including jointing with PVC solvent cement - 50mm dia Tee |
| 36 | OD283833/2023-2024:Providing & fixing PVC moulded fittings/accessories for rigid PVC pipes, including jointing with uPVC solvent cement - 50mm dia FTA |
| 37 | OD283841/2023-2024:Providing & fixing PVC moulded fittings/accessories for rigid PVC pipes, including jointing with uPVC solvent cement - 50mm dia MTA |
| 38 | OD283876/2023-2024:Providing & fixing PVC moulded fittings/accessories for rigid PVC pipes, including jointing with PVC solvent cement - 50mm dia 45 degree Elbow |
| 39 | OD283881/2023-2024:Providing & fixing PVC moulded fittings/accessories for rigid PVC pipes, including jointing with PVC solvent cement - 50mm dia Union |
| 40 | OD284515/2023-2024:Providing & fixing PVC moulded fittings/accessories for rigid PVC pipes, including jointing with PVC solvent cement - 50mm dia Non-Return Valves |
| 41 | OD284531/2023-2024:Providing & fixing PVC moulded fittings/accessories for rigid PVC pipes, including jointing with PVC solvent cement - 50mm dia Ball valves |
| 42 | OD284546/2023-2024:Providing & fixing PVC moulded fittings/accessories for rigid PVC pipes, including jointing with PVC solvent cement - 50mm dia Foot valves |
| 43 | OD284568/2023-2024:Providing & fixing CPVC moulded fittings/accessories for rigid CPVC pipes, including jointing with CPVC solvent cement - 32mm dia Ball valves |
| 44 | OD284579/2023-2024:Providing & fixing CPVC moulded fittings/accessories for rigid CPVC pipes, including jointing with CPVC solvent cement - 32mm dia Elbow |
| 45 | OD284604/2023-2024:Providing & fixing CPVC moulded fittings/accessories for rigid CPVC pipes, including jointing with CPVC solvent cement - 32mm dia Tee |
| 46 | OD284621/2023-2024:Providing & fixing CPVC moulded fittings/accessories for rigid CPVC pipes, including jointing with CPVC solvent cement - 63*32mm dia Reducer |
| 47 | OD284635/2023-2024:Providing & fixing CPVC moulded fittings/accessories for rigid CPVC pipes, including jointing with CPVC solvent cement - 25mm dia FTA |
| 48 | OD301002/2023-2024:Pipe fittings including clamps, steel nails, hose, hose clip, collar, shellac,solvent starbond 250ml for PVC and CPVC, Thread seal, Electrical cable (3 core) |
| 49 | OD301256/2023-2024:Providing and fixing CPVC moulded fittings / accessories for rigid PVC pipes, including jointing with CPVC solvent cement – 63x 63x 63 mm dia Tee |
| 50 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 51 | OD317410/2025-2026:Name board Please Enable Macros to View BoQ information |
