|
| 1 | Earth works in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth up to 50m and lift up to 1.5m, as directed by engineer in charge. |
| 2 | Providing and laying in position cement concrete of specified grade 1:4:8 (1 cement: 4 coarse sand (Zone-III): 8 stone grit 4 cm nominal size) |
| 3 | RCC works in 1:1.5:3 for footing & Raft (1 cement: 1.5 coarse sand(zone-III): 3 graded stone aggregate 20mm nominal size). |
| 4 | Providing and laying in position 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III): 3 graded stone aggregate 20mm nominal size) of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- all work up to plinth level. |
| 5 | Providing and laying in position 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- work in walls (any thickness) and columns. |
| 6 | Brick work with common burnt clay (non-modular) bricks of class-150 in foundation and plinth in cement mortar 1:4 (1 cement: 4 coarse sand) |
| 7 | Brick work with common burnt clay (non-modular) bricks of class-150 in Super Structure in cement mortar 1:4 (1 cement: 4 coarse sand) |
| 8 | RCC works in 1:1.5:3 for Beams and Slab (1 cement: 1.5 coarse sand(zone-III): 3 graded stone aggregate 20mm nominal size). |
| 9 | Steel reinforcement for R.C.C. work includes straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-mechanically treated bars of grade Fe-500D or more. |
| 10 | 12mm thick plaster in single coat on fair side in 1:4 cement, fine sand etc. all complete |
| 11 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4. |
| 12 | finishing walls with putty approved brand and manufacturer and of required shade on undecorated wall surface to give even shade over including curing and coat of all material, labor, t&P etc. required for proper completion of work. |
| 13 | Finishing walls with exterior emulsion paint (Apex) of approved brand manufacturer and of required shade on undecorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applied @ .75Ltr/10Sqm coat curing and cost of all material, labor, T&P etc., required for proper completion of work for two coats. |
| 14 | Providing and fixing M.S. tubular frames for door, windows, ventilators and cupboard with rectangular/ L-Type Sections. Made of 1.6mm thick M.S. sheet, joints mitered, welded and grinded finish, with profile of required size including all complete. |
| 15 | 1:2:4(1 cement: 2 course saqnd:4 graded stone aggregate 20mm nominal size) all complete |
| 16 | Painting or varnishing over priming coat over new steel and other metal surface upto 10cm. in width or girth or small not exceeding .10 sqm area after and including preparing the surface by thoroughly clearing oil, grease, dirt and other foreign matter and scoured with wire brushed, fine steel/wood, scrapper, sand papering and knotting including cost of all materials, labor t&P etc. required for proper completion of work. |
| 17 | Providing and fixing ISI Marked 35 mm flush doors shutters confirming to IS 2202 non-decorative type core of block board construction and frames of first-class hardwood and well meshed commercial 3 apply veneering with vertical grains or crossed bends and face veneers on both faces of shutters. |
| 18 | S/F of 4mm thick glass |
| 19 | Red Sandstone work for wall lining etc. (veneer work) 30mm thick in cement mortar 1:3 (cement: 3 course) including camping joints in white cement mortar 1:2 (1 white cement: 2 stone dust with and admixture of pigment making the stone shed) |
| 20 | proving and fixing 18mm thick granite (gang sawcut) mirror polished pre molded and pre polished machine cut for kitchen platform vanity counters windowsills, facia and similar locations of required size approved shade color and texture laid over 20m thick base cement mortar 1:4 joints treated with white cement mixed with making pigment epoxy touch ups all complete. |
| 21 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm blue ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc, of suitable size or as directed by the Engineer Incharge, complete in all respects. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 22 | i) 25 sqmm 3.5 core |
| 23 | ii) 16 Sqmm 4 core |
| 24 | Wiring point for light with 1.5mm FRLSH PVC insulated multistrand single core copper conductor cable in pvc conduit all complete |
| 25 | Wiring point for Fan or fresh air fan as in item no. 24. |
| 26 | Wiring point for 6ampplug point as in item no. 25. |
| 27 | S/F 20amp power plug |
| 28 | Wiring sub main 2.5mm in PVC conduit |
| 29 | S/F of 1200mm dia ceiling Fan of approved make. |
| 30 | S/F LED (1x20watts) Tube light fitting 1200mm all complete. |
| 31 | Structural steel work in single section fixed with or without connecti9ng plate including cutting hosting fixing in position and applying coat of approved steel primer |
| 32 | S & F of 63 A, 415V Heavy duty double break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect. |
| 33 | S & F of 16 A, 415V Heavy duty double break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect. |
| 34 | Brick work with common burnt clay (non-modular) bricks of class-150 in foundation and plinth in cement mortar 1:4 (1 cement: 4 coarse sand) |
| 35 | Precast terrazzo tiles 20mm thick with white, black or white and black, marble chip of sizes upto 6mm laid in floors, treads of steps and landing on bed of 25mm average thickness of cement mortar 1:3 ( cement: coarse sand) joined with neat cement slurry mixed with pigment to match the shade of tile including rubbing and polishing complete with precast tiles of colored with white cement. |
| 36 | Providing and laying in position cement concrete of specified grade 1:2:4 (1 cement: 2 coarse sand (Zone-III): 4 stone grit 2 cm nominal size) |
| 37 | Supply of good earth for low land filling |
| 38 | Making kaccha path with both side hedge bed, leveling dressing rolling up etc. all complete work. |
| 39 | Centering and shuttering include strutting, propping etc., and removal of foundations, footings, bases of columns, etc. for mass concrete walls (Anyhickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 40 | Providing and laying vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and confirming to IS: 15622 of approved brand and manufacturer in all colors and shade in skirting riser of steps laid with cement based high polymer modified water waste confirming to IS: 15477 in average 6 mm thickness including grouting of joints payment for grouting of joints to be made separately. |
| 41 | Painting or varnishing over priming coat over new steel and other metal surface upto 10cm. in width or girth or small not exceeding .10 sqm area after and including preparing the surface by thoroughly clearing oil, grease, dirt and other foreign matter and scoured with wire brushed, fine steel/wood, scrapper, sand papering and knotting including cost of all materials, labour t&P etc. required for proper completion of work. |
| 42 | Supply and fixing of decorative 8-to-16-watt LED bollard luminaire with driver set confirming to IP 65 Protection complete in all respect. CAT-AAA |
| 43 | Supply and laying of aluminium conductor PVC insulated armored served sheathed cables 1100 volts grade at a depth of 750 mm blue ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc., of suitable size or as directed by the Engineer Incharge, complete in all respects. The armoring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 44 | i) 16 sqmm 4 core |
| 45 | ii ) 35 sqmm 3.5 Core |
| 46 | Supply and fixing of steel tubular pole 9 m long designated 410 SP-31 in 1:3:6 cement concrete foundation including excavation backfilling complete in all respect. |
| 47 | Supply and fixing of factory wired integral LED Flood light luminaries with die cast aluminium housing with driver set suitable for 170-200 watt. confirming to IP-66 protection complete in all respect. CAT-AAA |
| 48 | Supply, install, test & commission Aesthetically designed decorative hot dipped galvanized mild steel 4 m Pole with gray powder finish inclusive complete with materials, equipment, workmanship, accessories & all requirements and also Supply and fixing of decorative 30 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body |
| 49 | S & F of 63 A, 415V Heavy duty double break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect. |
| 50 | S & F of 32 A, 415V Heavy duty double break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect. |
| 51 | Supply and burring of safe earthing electrode T-19 Cu- copper coated, length 2000mm, outer pipe 48.4mmx3.2mm, inner pipe26.9mm x2.6, terminal dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kg activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25x3 copper strip will be extra. |
| 52 | Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches for ammeter and voltmeter, instrumentals, current transformer etc.The board shall have suitable capacity electrolytic aluminum bus bars as per IS8623 insulated with heat shrink sleeving and mounted on non-gyroscopic supports such as CMC/DMC support with detachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entry boxes in case of pedestal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All outgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switchboard shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type swiswitchboardall be of cat A B & B-II and pedestal type for Cat-B and C only. (CAT-B) |
| 53 | Cleaning of jungli babool and other wild grouths with uprooting. |
| 54 | Uprooting rank vegetation and weeds by digging the area to a depth of 60cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. |
| 55 | Supplying and stacking good earth at site including royalty and carriage up to 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment)-250mm in overall areas. |
| 56 | Rough dressing the trenched ground including breaking clods. |
| 57 | Fine dressing the ground. |
| 58 | Preparation of beds for hedging and ground covers by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately). (For Hedging and ground covers) |
| 59 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) |
| 60 | i ) Holes 60 cm dia, and 60 cm deep |
| 61 | ii) Holes 45 cm dia, and 45 cm deep |
| 62 | Development of lawn by Maxican carpet including all completion of work. |
| 63 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserviceable materials as per direction of officer in charge (excluding cast of plant & water) |
| 64 | Trees, Palms, Topiary & Ornamental Plants. |
| 65 | Shrubs Plants |
| 66 | Hedge Plants |
| 67 | ground cover plants |
| 68 | Foxtail palm well developed with fresh & healthy foliage of ht. plant 9 to 10 feet |
| 69 | Cycus revoluta specimen plant, having 45 to 50 fresh and healthy, leaves having 30cm to 35cm circumference of base stem well developed in 40 cm challi |
| 70 | Ficus Black/Furcaria well developed with fresh & healthy 5 to 6 big ball specific size and shape 180 to 210cm ht |
| 71 | Ficus Yellow well developed with fresh & healthy 5 to 6 big ball specific size and shape 180 to 210cm ht |
| 72 | Topiary planted Casuarina plant fresh & healthy having 5 to 6 specific shape and size ball well developed 195 to 210 cm ht. plant |
| 73 | Topiary planted Golden bottle brush plant fresh & healthy having 5 to 6 specific shape and size ball well developed 195 to 210 cm ht. plant |
| 74 | Plumeria Alba well developed with fresh & healthy foliage of ht. plant 5 to 6 feet |
| 75 | Bismarkia Palm with full of branches and folia’s |
| 76 | Calliandra hybrida of height 105-120 cm., well branched, bushy in big size HDPE bag |
| 77 | Casia biflora of height 90-105 cm. bushy in big size HDPE bag |
| 78 | Tecoma gaudichaudi of height 90-105 cm., bushy in big size HDPE bag |
| 79 | Hamelia of height 105-120 cm., well branched, bushy in big size HDPE bag |
| 80 | Alternanthera species of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot / Plastic Pot |
| 81 | Clerodendrum inerme/Muraiya exotia having ht. 25 cm to 30 cm multi branched in 25 cm size of Earthen Pot / Plastic Pot. |
| 82 | Dianella variegated, with 3 to 4 variegated leaves in 20 cm size of Earthen Pot / Plastic Pot. |
| 83 | Berveena, of height 20-25 cm. full of branches well developed in 15 cm size of Earthen Pot / Plastic Pot. |
| 84 | Canna dwarf of height 25 to 30 cm., 2 to 3 suckers in earthen pot of size 20 cm |
| 85 | Vermicompost for Manuarionig (in 50kgs Bags), Approximately-10 Kgs/sqm |
| 86 | Antitermites treatment by Chloropyrophos, 20EC.(Two Times) During the development time. |
| 87 | Installation of Water Sprinkler Pipeline |
| 88 | Provision of Submersible Pump 2 H.P. (Electricity connection for operating the pump & lights bill, will be provided by the Department) |
| 89 | Miyawaki Plantation as per approval of DPR- 12000 SQM |
| 90 | Supply and fixing of Open Gym Equipment's. |
| 91 | CHEST PRESS-OUTDOOR GYM EQIPMENT |
| 92 | TWISTER-OUTDOOR GYM EQIPMENT |
| 93 | AIR WALKER-OUTDOOR GYM EQIPMENT |
| 94 | PARALLEL BAR-OUTDOOR GYM EQIPMENT |
| 95 | LEG PRESS-OUTDOOR GYM EQIPMENT |
| 96 | SITUP BOARD-OUTDOOR GYM EQIPMENT |
| 97 | Swings. |
| 98 | Providing and installation of swing type two seat (jhoola)including all completion. |
| 99 | Providing and installation of Sea-saw type two seats (jhoola) including all completion of work (Triple type 8' long) |
| 100 | Supply and fixing of Victorian Bench FRP & C-Channel. |
| 101 | Supply and fixing of SS Dustbin (Double Sided). |
| 102 | Providing and Fixing RO 150 Liter/Hour for Drinking water Including all completion of work. |
| 103 | GST 18% Please Enable Macros to View BoQ information |
