Pre-sensitised Plates 479 x 620 x 0.28 mm. (Long run) for mark 62 Web offset M/c. Specification: Positive working. Dot resolution : 2 – 98%. The Plate should give minimum of 1,00,000 (one lakh) impressions at the machine speed of 10,000 to 18,000 impressions per hour. Resistance to scratches/ abrasion on press, resistance to oxidation and chemicals that are used in offset printing process.
3
Pre-sensitised Plates 609 x 889 x 0.28 mm. (Short Run) for orient Excel 2HI /4HI/Mono unit W/o m/c Specification: Positive working. Dot resolution : 2 – 98%. The Plate should give minimum of 10,000 impressions at the machine speed of 20,000 to 30,000 impressions per hour. Resistance to scratches/ abration on press, resistance to oxidation and chemicals that are used in offset printing process.
4
Pre-sensitised Plates 914x600x0.28mm (Long run) for Raghbeer Fast 300 W/o m/c Specification: Positive working. Dot resolution : 2 – 98%. The Plate should give minimum of 1,00,000 (one lakh) impressions at the machine speed of 15,000 to 25,000 impressions per hour. Resistance to scratches/ abration on press, resistance to oxidation and chemicals that are used in offset printing process.
5
Pre-sensitised Plates 914x600x0.28mm (Short run) for Raghbeer Fast 300 W/o m/c Specification: Positive working. Dot resolution : 2 – 98%. The Plate should give minimum of 10,000 impressions at the machine speed of 10,000 to 18,000 impressions per hour. Resistance to scratches/ abration on press, resistance to oxidation and chemicals that are used in offset printing process.
6
Group I (B)- Sheet fed Offset Machine Plates
7
Pre-sensitised Plates 770x927x0.28mm (Long Run) for HMT RAI m/c Specification: Positive working. Dot resolution : 2 – 98%. The Plate should give minimum of 1,00,000 (one lakh) impressions at the machine speed of 5,000 to 8,000 impressions per hour. Resistance to scratches/ abration on press, resistance to oxidation and chemicals that are used in offset printing process.
8
Pre-sensitised Plates 770x927x0.28mm (Short Run) for HMT RAI m/c Specification: Positive working. Dot resolution : 2 – 98%. The Plate should give minimum of of 10,000 impressions at the machine speed of 5,000 to 8,000 impressions per hour. Resistance to scratches/ abration on press, resistance to oxidation and chemicals that are used in offset printing process. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
