|
| 1 | Please Enable Macros to View BoQ information |
| 2 | SITC of following diagonal size professional Display, 4k Resolution, Brightness(Typ.) 440 nit and above , Contrast Ratio-2000:1 and above, Viewing Angle(H/V)-178/178, Response Time(G-to-G) 8ms, Input: RGB- Analog D-SUB, Video- HDMI 2.0 (2), HDCP- HDCP 2.2, Audio- Stereo mini Jack, USB- Only F/W upgrade, Outputs: RGB- DP1.2(Loop- out), Audio- Stereo mini Jack, External Control- RS232C(in/out), RJ45, External Sensor Detachable type(IR Ambient). Operation Hour 24/7. mounting bracket etc. as required.55\\" |
| 3 | SITC of following diagonal size professional Display, 4k Resolution, Brightness(Typ.) 440 nit and above , Contrast Ratio-2000:1 and above, Viewing Angle(H/V)-178/178, Response Time(G-to-G) 8ms, Input: RGB- Analog D-SUB, Video- HDMI 2.0 (2), HDCP- HDCP 2.2, Audio- Stereo mini Jack, USB- Only F/W upgrade, Outputs: RGB- DP1.2(Loop- out), Audio- Stereo mini Jack, External Control- RS232C(in/out), RJ45, External Sensor Detachable type(IR Ambient). Operation Hour 24/7. mounting bracket etc. as required.43\\" |
| 4 | Note:- GST Will Paid Extra for Both Items. |
| 5 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 6 | Supplying and fixing Bed of size 2.08 m length × 1.20 m width × 0.84 m height, made of Solid Sheesham Wood which ensures durability of the solid wood bed and provides a visually appealing and safe design without sharp edges. The bed shall be provided with a strong and durable base ensuring adequate stability, strength, and long service life. 12 mm MDF shall be used for mattress base. The bed shall consist of leg posts of minimum size 75 mm × 75 mm, side rails of size 40 mm × 150 mm, and a footboard having height between 450 mm to 550 mm, all made of solid Sheesham wood and properly finished. The work includes supplying, placing, and fixing the bed complete in all respects as per the directions of the Engineer-in-Charge / Site In-charge. |
| 7 | Supplying and placing of StudyTable of size 1200Lx600Dx750H mm made using seasoned and chemically treated Sheesham solid wood and Sheesham veneered plywood. The Table top and back modesty panel thickness is 18mm made using Sheesham veneered plywood.The back modesty panel is 350mm in height. The table front and back legs and connecting base frame shall measure 75x28mm, front & side frames below the top shall measure 60x28mm made using solid sheesham wood. The Studyf Table top shall have 01 nos of cable manager installed. A pedestal storage cabinet of size 450x450x680 mm will be placed below the table top which forms a part of this Study Table. The Study Table shall be duly finished using wood stains, wood sealers and Melamine polish as top coat in Walnut Shade as approved. Complete as per approval and direction of Engineer Incharge. Pedestal Storage Cabinet : Supplying and placing of Pedestal Storage Cabinet having overall size of 450Lx450Dx680H in mm. The cabinet shall have 01 small drawer of size 400x180mm & 01 big file drawer of size 400x400mm. The cabinet carcuss shall be made using 18mm sheesham veneered plywood on top & sides. The front facia of the cabinet shall have outer framework 30mm wide made using Sheesham veneered plywood. The drawer facia shall be made in 18mm Sheesham veneered plywood which will be recessed 30mm from front. The drawer sides and back shall be made using 18mm MR grade plywood fitted with good quality 350mm telescopic drawer channels of approved make.The base skirting of the cabinet shall be made in solid sheesham wood having 40 mm height. The back shall be made in 12mm MR grade plywood. All necessary hardware shall be fitted such as telescopic channels, drawer locks, handles,buffers etc. of approved quality and make .Complete as per approval and direction of Engineer Incharge. (Please refer to detailed drawings provided). |
| 8 | Supplying and placing ergonomically designed, comfortable & aesthetically appealing Medium back chair. The seat shall be made of 15mm thick hot pressed malaysian plywood with HR polyurethane foam 50mm thick having density 40kg/m³ upholstered with fabric air mesh tapestry in black colour with 0.9mm thick and 300 GSM and the back shall be made of double layered moulded hot pressed plywood (12+6)mm thick with HR polyurethane foam 30mm thick having density 32kg/m³ upholstered with Jute fabric tapestry in grey colour with 1mm thick and 300 GSM and foam net in black colour with 0.9mm thick & 300GSM behind of the back. Seat and back shall be joined with HR steel powder coated sheet. The armrest shall be used PU arm adjustable type completely joint with seat. The chair shall have synchro knee tilt revolving mechanism with four position locking and tilt tension adjustment. The pneumatic seat height adjustable 100mm with BIFMA standard class-3 gaslift. The Pedestal shall be made up of injection moulded black nylon having pitch circle Dia 700 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with BIFMA standards. The Seat size shall be 485±10mm(W) X 500±10mm(D) and back size shall be 725±10mm(H) from seat & overall height = 980±10mm.Complete as per approval and direction of Engineer Incharge. |
| 9 | Supplying and placing of Dining Table of size 1800L × 900D × 750H mm made using solid Sheesham wood duly seasoned and chemically treated and Sheesham veneered plywood. The table top shall be made of 18 mm thick Sheesham veneered plywood with wooden moulded beading of size 40 × 30 mm provided below the top. The side rails framework shall be in solid Sheesham wood of size 100 × 28 mm with beading detail of 12 × 12 mm. Two numbers support frames of size 70 × 28 mm shall be provided below the top attached to the side rails. The legs shall be made in solid Sheesham wood of size 100 × 100 mm tapering down to 70 × 70 mm at the bottom and shall be of knockdown type using dowel set hardware. The table shall be duly finished with wood stains, wood sealers and melamine polish as top coat in approved walnut shade, complete in all respects as per approval and direction of Engineer-in-Charge. |
| 10 | Supplying and placing of Dining Chair of size 450Lx480Dx900H mm made using seasoned and chemically treated Sheesham solid wood. The chair shall have upholstered seat and backrest made using good quality upholstery fabric of approx Rs.700-Rs.800 per metre as approved. The sitting height of the chair shall be 460mm. The chair front legs of size 50x50mm tapering down to 40x40mm, frame on all 4 sides below the seat measuring 40x28mm, back legs 40x30mm, backrest horizontal frame 30x30 mm are all made in solid sheesham wood. The chair seat 450x450mm is made using good quality 32 density PU foam of thickness 50mm pasted on a 12mm MR grade plywood base finished with upholstery fabric. The seat is finished below with a marking cloth and fitted with screws to the main frame. The chair cushioned backrest is made using good quality 32 density PU foam of thickness 25mm on front side and 10mm on the back side pasted on a 6mm MR grade plywood base finished with upholstery fabric on both sides. Adequate corner supports are provided on to the main frame below the seat for durability. The Dining Chair shall be duly finished using wood stains, wood sealers and Melamine polish as top coat in Walnut Shade as approved.Complete as per approval and direction of Engineer Incharge. |
| 11 | Providing and fixing of Sofa 3 seater having overall size of 2000Lx780Dx800H in mm. The sofa shall be upholstered using good quality upholstery fabric of Rs.800 per metre as approved. Good quality PU foam of 32 density of approved make shall be used in overall cushioning. The seating height of sofa will be 450mm. The backrest and armrest height shall be 350 mm above the seat. The sofa front legs of size 40x40x750 mm shall be made in solid sheesham wood. The polished base frame of the sofa shall be made in solid sheesham wood of frame size 40x28mm with overall frame height 150 mm and floor clearance 110 mm. The seat thickness will be 200mm overall having good quality 170mm thick PU foam of 32 density fixed on a solid wood frame of size 60x30mm with zig zag spring and elastic bands used in base as necessary. The seating length shall be divided into 2 part seat and shall have pipin detail. The seat shall be fixed to the upholstered base frame of height 100mm using screws. The backrest shall be 120mm thick. The backrest and armrests with tufted pattern shall have good quality 75mm thick PU foam of 32 density on the inner side and 12mm PU foam on the outer. The Sofa inner structure framework shall be made using seasoned and chemically treated solid wood as approved. All visible wood work on the sofa shall be duly finished using wood stains, wood sealers and Melamine polish in Walnut Shade as approved. Complete as per approval and direction of Engineer Incharge. |
| 12 | Supplying and placing of Sofa 1 seater having overall size of 850Lx780Dx800H in mm. All exposed wood work on sofa to be made in Solid Sheesham wood duly seasoned and chemically treated. The sofa shall be upholstered using good quality upholstery fabric of approx Rs.700-Rs.800 per metre as approved . Good quality PU foam of 32 density of approved make shall be used in overall cushioning. The seat lenght shall be 650mm and seat depth shall be 650mm. The seating height of sofa shall be 450mm. The backrest and armrest height shall be 350 mm above the seat. The sofa front legs of approx size 40x40x750 mm shall be made in solid sheesham wood. The polished base frame of the sofa shall be made in solid sheesham wood of frame size 40x28mm with overall frame height 150 mm and floor clearance 110 mm. The seat thickness will be 200mm overall having good quality 170mm thick PU foam of 32 density fixed on a solid wood frame of size 60x30mm with zig zag spring and elastic bands used in base as necessary. The seat shall have pipin detail. The seat shall be fixed to the upholstered base frame of height 100mm using screws. The backrest shall be 120mm thick. The backrest and armrests with tufted pattern shall have good quality 75mm thick PU foam of 32 density on the inner side and 12mm PU foam on the outer. The Sofa inner structure framework shall be made using seasoned and chemically treated solid wood as approved. All visible wood work on the sofa shall be duly finished using wood stains, wood sealers and Melamine polish in Walnut Shade as approved. Complete as per approval and direction of Engineer Incharge. |
| 13 | Supplying and placing of Centre Table of size 1200Lx600Dx450H mm made using Solid Sheesham wood duly seasoned and chemically treated and sheesham veneered plywood. The top and base shelf are made in 18mm sheesham veneered plywood. Table legs of size 60x60mm tapering down to 40x40mm at the bottom are made in solid sheesham wood. The framework of size 40x28 below the top & base shelf is made in solid sheesham wood.The centre table shall be duly finished using wood stains, wood sealers and Melamine polish as top coat in Walnut Shade as approved. Complete as per approval and direction of Engineer Incharge. |
| 14 | Supplying and placing of Centre Table of size 550Lx550Dx500H mm made using solid Sheesham wood duly seasoned and chemically treated and Sheesham veneered plywood. The top and base shelf panel is made in 18mm sheesham veneered plywood. Table legs of size 60x60 mm are made in solid sheesham wood. The framework below the top is of size 35x28 mm & base frame is 45x28 mm & skirting frame of size 40x28 mm is made in solid sheesham wood. The centre table shall be duly finished using wood stains, wood sealers and Melamine polish in Walnut Shade as approved. Complete as per approval and direction of Engineer Incharge. |
| 15 | Supplying and placing of Visitor Chair. The seat shall be made of double layered (12+6)mm thick hot pressed plywood with HR polyurethane foam 50mm thick having density 40kg/m³ upholstered with fabric tapestry 0.6mm thick and 235 GSM and the back shall be made of hot pressed plywood 12mm thick with HR softy polyurethane foam 12mm thick having density 23kg/m³ upholstered with fabric tapestry 0.6mm thick and 235 GSM. There shall be L type ply used. The armrest shall be used PP arm mounted on metal pipe frame completely joint with seat and back. The frame structure shall be cantilever support type made up of MS/CRCA powder coated with 40-50µ (DFT) thick round pipe of Dia 25.4mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 460±10 mm(W) X 505±10 mm(D) and back size shall be 400±10 mm(H) from seat & overall height = 850±10 mm.Complete as per approval and direction of Engineer Incharge. |
| 16 | Supplying and placing of Carrom Table of size 900Lx900Dx760H mm with professional size Carrom Board with playing surface of approx 730x730 mm. The Table top outer frame 85x50 mm & pedestal pillar 120mm dia and base plate 300 mm dia are all made with Sheesham Wood duly seasoned and chemically treated. The Table top outer frame 85x40 mm shall have PU leather inserts for hand support and coin holders on all for corners. All wood surfaces duly finished using wood stains, wood sealers and Melamine polish in Walnut Shade as approved. The overall board size including the frame is 900 mm square and the board is mounted on a sturdy stand to achieve a playing height of about 750 mm from the floor. The playing surface is made from high-quality plywood finished with a smooth low-friction polish to ensure fast and consistent striker movement. The frame and stand are made from solid hardwood. The board features four corner pockets of approximately 45–50 mm diameter, fitted with nets or collectors beneath. Standard black boundary lines, base circles, arrows, and a central decorative design are precisely screen-printed according to tournament norms. The table is designed to be rigid, vibration-free and well-balanced suitable for professional and formal recreational settings.Complete as per approval and direction of Engineer Incharge. |
| 17 | Supplying and placing of Chess Table of size 750Lx750Dx750H mm with removable professional size Chess Board of size 500x500 mm divided into 64 equal squares each measuring 57 × 57 mm. Table top is 28mm , table frame is 85x28mm & legs 85x85 mm tapering down to 60x60mm in Solid Sheesham Wood Seasoned and Chemically Treated. Table top surface to have removable chess board. Table to have 2 nos of drawers of length 350mm on opposite sides.Finished with sealer & melamine as top coat. Wood Shade as approved. The overall table top size including the surrounding border is 750 mm square, providing adequate resting space around the board. The table stands at a height of about 760mm, matching standard table ergonomics for seated play. The chessboard surface is crafted from high-quality hardwood or veneer in contrasting light and dark tones finished with a smooth, low-glare protective coating. The supporting structure consists of solid wooden legs , designed for stability and vibration-free play. The table is built suitable for professional tournaments and formal recreational settings.Complete as per approval and direction of Engineer Incharge. |
| 18 | Supplying and fixing of TT Table Model : Stag Championship or equivalent having overall size of 2740Lx1525Dx760H mm. Top Thickness 22mm made of laminated particle board. Frame size 25x40mm. Wheel size 75mm. No of wheels - 02 with locks & 06 without locks. Paint Dupont PU Anti Glare coating on top. Accessories included are 2 TT Rackets, 6 Balls, a table cover & clamp net. Complete as per approval and direction of Engineer Incharge. |
