| 1 | WOODEN DRESSING TABLE WITH MIRROR ONE STOOL WITH DRAWER-Overall Size : Dressing Table Depth - 450.0 mm Width - 440.0 mm Height - 1710.0 mm Dressing Stool ?Depth - 335.0 mm Width - 360.0 mm Height - 450.0 mm .Material :Panels of Dressing table & Stool are made of 18 mm thick Prelamin ated Particle Board .All the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Side pan els are made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trim s fixed on to it.Mirror panel is made of 18 mm thick particle board with 4 mm thick mirror fixed on to it..Sup porting pipe used for fixing the mirror frame is made of M.S. 25 mm square pipe of thickness 1.2 mm. Stool seat is made of foam with fabric wrapped on to it.Hardware : The high quality hardware used like Roller slid es, Hinges , minifix, dowels is of make Hettich..Construction : Knock Down construction.Packets : 3 Packets. Finish :. 18 mm thick Prelaminated Particle Board is in Walnut shade. Metal pipe is powder coated in shade Metallic Silver Grey to thickness of 50 microns(+-10).Bidder/OEM must have following Certificates: ISO 450 01:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB autho rized agency), BIFMA Membership, BIFMA Level 2 & 3 conforms to ANSI/BIFMA e3-2014e Furniture sustainab ility standard, GREENGUARD (from UL),Green Pro, Griha, AIOTA , IGBC , Indoor Air Quality certificate by SCS Global. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 2 | Wooden Centre Table with Glass Top Dimension (mm) - 1310mm Lenghth X 700mm Depth X 380mm Height TABLE METERIALS & SIZE : TOP : TEMPERED GLASS ,1252*652*8MM Color : SUPER WHITE IN BEIGE PAINTING BODY : MDF COLOR : GREY-WHITE HIGH GLOSSY Type of Caoting (PU /Melamine/Paper/Pap er plus PU/Lamination): PU LEGS: RUBBER WOOD,700*372*85MM Color : WALNUT PAINTING Bidder/OEM m ust have following Certificates: ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 conforms to A NSI/BIFMA e3-2014e Furniture sustainability standard, GREENGUARD (from UL),Green Pro, Griha, AIOTA , IG BC , Indoor Air Quality certificate by SCS Global. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 3 | wooden single bed, overall Size :Length - 2060.0 mmWidth - 1131.0 ram Height - 945.0 mm Material: Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness. Horizontal plin ths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board.Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it.Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decora tive trims fixed on to it.Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with al l the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Construction :Knock Down cons truction.Packets :1 Bed in 1 packets. Finish :18 mm thick Prelaminated Particle Board is in Walnut shade. M etal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10).Bidder/OEM must h ave following Certificates: ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certifi cate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 conforms to ANSI/BI FMA e3-2014e Furniture sustainability standard, GREENGUARD (from UL),Green Pro, Griha, AIOTA , IGBC , I ndoor Air Quality certificate by SCS Global. As per GeM PD ID-5116877-34411116017. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 4 | Steel Chair with Cushion seat back & arm-.SEAT/BACK ASSEMBLY: The seat should be made u p of 1.2 ?0.1cm. thick hot pressed plywood and upholstered with fabric or synthetic leather and moulded Po lyurethane Foam. The back should be made up 1.2 ?0.1cm. thick hot pressed plywood upholstered with repl aceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and fo am should be designed with contoured lumber support for comfortable seating posture. MID BACK SIZE 48. 0cm.(W) X 64.5cm.(H) SEAT SIZE 51.0cm.(W) X 48.0cm.(D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam for seat and back should be moulded with density = 45?2 kg/m? and Hardness load 16 ? 2 kgf for 25% compression. 3.ARMRESTS:The armrest top should be made of moulded polyuretha ne (P.U) and mounted on to a fixed type M.S. tubular armrest support which should be chrome plated. The arm support has static vertical adjustment of ?1.5?0.05cm. 4.FIXED BACKREST: The backrest consshould be ts of a fixed type mechanism i.e. no back up/down adjustment. 5.LEG FRAME ASSEMBLY: The leg frame wel ded assembly should be chrome plated, made from 3.5 ?0.03cm. x 1.5 ?0.02cm. x 0.16 ?0.0128cm. thk rou nd M.S. ERW tube and provided with a base plate for seat fixing. Bidder/OEM must have following Certificat es: ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from N ABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 conforms to ANSI/BIFMA e3-2014e Furnitu re sustainability standard, GREENGUARD (from UL),Green Pro, Griha, AIOTA , IGBC , Indoor Air Quality certif icate by SCS Global. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 5 | 1 seater sofa Overall Size : Width : 100cm Depth : 99cm Height : 98cm Seating Height : 47c m LEATHER/PVC/FABRIC:pu,pvc , FRAME MATERIAL:wood,foam,pu,pvc,sofa spring,flexible belt,pocket sprin g . SEAT FOAM: (DENSITY, TYPE):35#hard , BACK FOAM: (DENSITY, TYPE):35#soft. LEG MATERIAL:wood De nsity of Cushion of Backrest Material (Kg/Cubic M): 28 Covering Material for Seat and Backrest : Leatherite Frame Structure Material and size (?1 mm): 18 mm thick Teak Plywood Colour of Polish on exposed Wood fr ame Natural brown Colour of Covering Material Black. Bidder/OEM must have following Certificates: ISO 450 01:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB autho rized agency), BIFMA Membership, BIFMA Level 2 & 3 conforms to ANSI/BIFMA e3-2014e Furniture sustainab ility standard, GREENGUARD (from UL),Green Pro, Griha, AIOTA , IGBC , Indoor Air Quality certificate by SCS Global. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 6 | STEEL ALMIRAH WITH DOUBLE DOOR-Almirah height(excluding the height of pedestal) ? 5 m m 1155 mm , Almirah width ? 5 mm900 mm, Almirah depth ? 5 mm 430 mm, Technical specification of Alm irah steel Generally conforming to BIS specification IS: 3312:2021 (with latest amendment) Type of Almirah steel Almirah Steel shelving cabinet with partial wardrobe, Construction type Riveted Installation Free stan ding, Pedestal Yes, Pedestal fitted with 3 mm Teflon Bush, Pedestal height (? 5 mm) 125 mm ,Locker requir ed No, Door type Hinged, Number of door 2,Number of hinges (for each door) 2,Door stiffener up to full doo r height provided Yes, Mirror fitted No mirror, Number of drawers required No Drawer, Shelves required Adj ustable Number of shelves 2,Uniformly distributed load (UDL) for shelves 60 Kgs. Wardrobe by style No war drobe, Tie Hanger No, Colour of finish Prince Grey, MATERIAL :- Steel sheet material CRCA sheets conformin g to grade CRI of IS 513(part-1):2016 (with latest amendment),Sheet rounds and flats N.A, Screws Conformi ng to IS 1365,Hanging rod material No hanging rod, Mirror frame made out of (if provided) No mirror frame, Tie hanger made out of N.A, Stiffener material MS sheet, DIMENSION-Locker inside height ? 5 mm No locker ,Locker inside width ? 5 mm N.A, Locker inside depth ? 5 mm N.A, Drawer height N.A, Drawer width N.A, Dr awer depth N.A, Mirror sizes N.A,Shelves lipped flange 35 mm Bidder/OEM must have following Certificates: ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABC B authorized agency), BIFMA Membership, BIFMA Level 2 & 3 conforms to ANSI/BIFMA e3-2014e Furniture s ustainability standard, GREENGUARD (from UL),Green Pro, Griha, AIOTA , IGBC , Indoor Air Quality certificat e by SCS Global. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 7 | WOODEN BED SIDE TABLE- overall Size : Depth - 450.0 mm Width - 440.0 mm Height - 510.0 mm Material : Body and drawer panels of Bed side table are made of 18 mm thick Prelaminated Particle Bo ard. All the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Side panels are made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trim fixed on to it. H ardware : The high quality hardware used like Roller slides, Hinges , minifix, dowels is of make Hettich.. Con struction : Knock Down construction.Packets : 1 packet. Finish :. 18 mm thick Prelaminated Particle Board is in Walnut shade. Bidder/OEM must have following Certificates: ISO 45001:2018, ISO 9001:2015, ISO 14001: 2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BI FMA Level 2 & 3 conforms to ANSI/BIFMA e3-2014e Furniture sustainability standard, GREENGUARD (from U L),Green Pro, Griha, AIOTA , IGBC , Indoor Air Quality certificate by SCS Global. [ Warranty Period: 30 Mon ths after the date of delivery ] ] |
| 8 | STEEL OFFICE TABLE WITH SUNMICA TOP- Table without CPU Hanger size shall be 1500 Widt h mm x 600 Depth mm x 728 Height mm. Top shall be 18 mm thick Pre laminated particle board all work s urface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 m m thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 m m 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall b e injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be hav ing shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shal l be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyst er) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster). Bidder/OEM must have following Certificates: ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 conforms to ANSI/BIFMA e3-2014e Furniture sustainability standard, GREENGUARD (from UL),Green Pro, Griha, AIOTA , IGBC , Indoor Air Quality certificate by SCS Global. "1)SIDE FRAME ASSEMBLY: The side frame assembly should be fitted t o the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It should be made of 0 3.81 ?0.03cm. x 0.2 ?0.016cm. thick cmx0.16cnn and black powder coated ( DFT 40-60 microns ). The ends should be fitted with ABS moulded end caps. 2)TIE MEMBER: It should be the connecting beam assy. w hich holds the two side frames to each other. 2 nos. tie members should be used to connect the side frame s. The tie-member should be of 0 3.81 ?0.03cm. x 0.2 ?0.016cm. thick cm x 0.16cm and black powder coat ed ( DFT 40-60 microns ). The seat/back assemblies should be mounted on one of the tie-member which ha s 5.0 ?0.1cm x 5.0 ?0.1 cm x 0.5 ?0.1cm. thk -- 5.5 ?0.1cm Long MS. Std. angles welded to mount the seat and back. 3)SEATREST ASSEMBLY:The seat rest assembly consshould be ts of a fabricated inner-frame asse mbly insitu-moulded High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardne ss load 25 ? 2 kgf for 25% compression of the foam. The complete moulded seat rest assembly should be c overed with a replaceable fabric upholstery cover SEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T) 4)BA CKREST ASSEMBLY:The backrest assembly should be flexing type and consshould be ts of a fabricated inner -frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg /m3 with Hardness load 14 ? 2 kgf for 25% compression of the foam. The complete moulded backrest asse mbly should be covered with a replaceable fabric upholstery cover. BACK SIZE: 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T) 5)ADJ. GLIDES: The adj. glide should be injection moulded in black Nylon & fitted to the front e nd of side frame assembly along with ABS moulded adj. Glide base to take cshould be or unleveled floor sur face. Overall Dimensions of Chair Seat Height - 43.5 cm. Height - 78.5cm Width-164.0cm and Depth-70.0 c m. Bidder/OEM must have following Certificates: ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 500 01:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 conforms to ANSI/BIFMA e3-2014e Furniture sustainability standard, GREENGUARD (from UL),Green Pro, Griha, AIOTA , IGBC , Indoor Air Quality certificate by SCS Global." [ Warranty Period: 30 Months after the date of delivery ] ] |
| 9 | 3 Seater Sofa Overall Size : Width : 203cm Depth : 99cm Height : 98cm Seating Height : 47c m LEATHER/PVC/FABRIC:pu,pvc , FRAME MATERIAL:wood,foam,pu,pvc,sofa spring,flexible belt,pocket sprin g . SEAT FOAM: (DENSITY, TYPE):35#hard , BACK FOAM: (DENSITY, TYPE):35#soft. LEG MATERIAL:wood De nsity of Cushion of Backrest Material (Kg/Cubic M): 28 Covering Material for Seat and Backrest : Leatherite Frame Structure Material and size (?1 mm): 18 mm thick Teak Plywood Colour of Polish on exposed Wood fr ame Natural brown Colour of Covering Material Black. Bidder/OEM must have following Certificates: ISO 450 01:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB autho rized agency), BIFMA Membership, BIFMA Level 2 & 3 conforms to ANSI/BIFMA e3-2014e Furniture sustainab ility standard, GREENGUARD (from UL),Green Pro, Griha, AIOTA , IGBC , Indoor Air Quality certificate by SCS Global. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 10 | 3 sitter Steel Chair with Cushion seat back & arm-.SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ?0.1cm. thick hot-pressed plywood and upholstered with fabric or synthetic leather and mo ulded Polyurethane Foam. The back should be made up 1.2 ?0.1cm. thick hot-pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back pl y and foam should be designed with contoured lumber support for comfortable seating posture. MID BACK SIZE 48.0cm.(W) X 64.5cm.(H) SEAT SIZE 51.0cm.(W) X 48.0cm.(D) 2. HIGH RESILIENCE (HR) POLYURETHA NE FOAM: The HR polyurethane foam for seat and back should be moulded with density = 45?2 kg/m? and Hardness load 16 ? 2 kgf for 25% compression. 3.ARMRESTS:The armrest top should be made of moulded p olyurethane (P.U) and mounted on to a fixed type M.S. tubular armrest support which should be chrome pla ted. The arm support has static vertical adjustment of ?1.5?0.05cm. 4.FIXED BACKREST: The backrest conss hould be ts of a fixed type mechanism i.e. no back up/down adjustment. 5.LEG FRAME ASSEMBLY: The leg f rame welded assembly should be chrome plated, made from 3.5 ?0.03cm. x 1.5 ?0.02cm. x 0.16 ?0.0128c m. thk round M.S. ERW tube and provided with a base plate for seat fixing. Bidder/OEM must have followin g Certificates: ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 conforms to ANSI/BIFMA e3-201 4e Furniture sustainability standard, GREENGUARD (from UL),Green Pro, Griha, AIOTA , IGBC , Indoor Air Qu ality certificate by SCS Global. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 11 | Single bed mattress (L-78"x B-36" ) Thickness: 10 cm As intelligent as a mattress can get. A mix of different foams provides support and regularizes pressure points. Convoluted foam in the topmost la yer maintains airflow and enhances the comfort level by giving a feeling of acupressure to the body. A bond ed foam in the base provides direct support, while a layer of softy foam in (4? variant) the middle provides i ndirect support to the reclining body.Bidder/OEM must have following Certificates: ISO 45001:2018, ISO 90 01:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), B IFMA Membership, BIFMA Level 2 & 3 conforms to ANSI/BIFMA e3-2014e Furniture sustainability standard, G REENGUARD (from UL),Green Pro, Griha, AIOTA , IGBC , Indoor Air Quality certificate by SCS Global. [ Warr anty Period: 30 Months after the date of delivery ] ] |
| 12 | WOODEN CUPBOARD-Double(2) Door, "Overall Size including top cornice : Width - 946.0 mm Depth - 598.0 mm Height - 1941.0 mmMaterial :Body panels are made of 18 mm thick Prelaminated Particl e Board.All the exposed edges are edge banded with 0.8 mm thick PVC edge banding.Door are made of 18 mm thick Prelaminated Particle board with all the exposed edges are edge banded with 0.8 mm thick PVC e dge banding. Side panel are made of 18 mm thick Prelaminated Particle board with all the exposed edges a re edge banded with 0.8 mm thick PVCedge banding and with imported H.D.F. foil wrapped decorative trim fixed on to it. Drawer components are made of 18 mm thick Prelaminated Particle Board .All the exposed e dges are edge banded with 0.8 mm thick PVC edge banding. Body back and drawer bottom are made of 8 mm thickPrelaminated particle board.Top cornice is made of imported H.D.F. foil wrapped decorative Trim. Hardware : The high quality hardware used like Roller slides, Hinges , minifix,wooden dowels is of make Het tich. Lock used for main door is 3 way lock and lock used for drawer is cam lock.Construction : Knock Down construction. Packets : 2 packet. Finish :. 18 mm thick Prelaminated Particle Board is in Walnut shade.Bidde r/OEM must have following Certificates: ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 confor ms to ANSI/BIFMA e3-2014e Furniture sustainability standard, GREENGUARD (from UL),Green Pro, Griha, AI OTA , IGBC , Indoor Air Quality certificate by SCS Global." [ Warranty Period: 30 Months after the date of delivery ] ] |
| 13 | WOODEN CUPBOARD-Single Door "Overall Size including top cornice : Width - 546.0 mm Dep th - 598.0 mm Height - 1941.0 mmMaterial :Body panels are made of 18 mm thick Prelaminated Particle Bo ard.All the exposed edges are edge banded with 0.8 mm thick PVC edge banding.Door are made of 18 mm thick Prelaminated Particle board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Side panel are made of 18 mm thick Prelaminated Particle board with all the exposed edges are e dge banded with 0.8 mm thick PVCedge banding and with imported H.D.F. foil wrapped decorative trim fixe d on to it. Drawer components are made of 18 mm thick Prelaminated Particle Board .All the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Body back and drawer bottom are made of 8 mm th ickPrelaminated particle board.Top cornice is made of imported H.D.F. foil wrapped decorative Trim. Hardw are : The high quality hardware used like Roller slides, Hinges , minifix,wooden dowels is of make Hettich. L ock used for main door is 3 way lock and lock used for drawer is cam lock.Construction : Knock Down constr uction. Packets : 2 packet. Finish :. 18 mm thick Prelaminated Particle Board is in Walnut shade.Bidder/OEM must have following Certificates: ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All IS O certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 conforms to ANSI/BIFMA e3-2014e Furniture sustainability standard, GREENGUARD (from UL),Green Pro, Griha, AIOTA , I GBC , Indoor Air Quality certificate by SCS Global." [ Warranty Period: 30 Months after the date of deliver y ] ] |
