|
| 1 | Automatic Control Panel fabricated with 16 SWG CRCA sheet outdoor type with 25A Contactor, 63A MCCB, 24 Hr. Timer and Revese/ Forward Switch etc |
| 2 | Providing and fixing of Wire Topiary Frame shapes to create a unique living sculpture in wire frame in the shape of elephant as per the size :: 11ft x 5ft x 10ft height as per the drawing and complete in all respect as per the direction of engineer-in-charge.. |
| 3 | Providing and Fixing of pergolas which is 11`, 8` and 9` high and fabrication with mild steel apollo with epoxy coating as per approved colour .. |
| 4 | Providing and fixing of Sky Walker equipment made up of 4inch B class GI pipe: Prime Stand duly bend, Foundation center pipe with 60mm seamless pipe bushes.Permanent lubricated Ball bearings 6205zz/6205-2rs.All welded joint are of good quality.High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm.Allen Bolts are also used to tighten the closing cap.Closing cap of HDPE / PPCP Plastic is used. High quality rubber grip are also used for firm handling.The powder coating done with Pure polyester powder with 60 to 70 micron thickness. |
| 5 | Providing and fixing of Shoulder and Chest Press Combo made up of 4inch B class GI pipe: Prime Stand duly bend, Foundation center pipe.The handle frame is made of 42mm OD G.I. pipe.The remaining frame is made of 32mm OD G.I. pipe. Seating frame support of dimension 250 x 150 x 5mm is welded for supporting the pedal seat. MS Seat of size 380mm x 300mm x 5mm is used for supporting the foot. ?? 60mm seamless pipe bushes. Permanent lubricated Ball bearings 6205zz/6205-2rs. Foundation plate of dia ??225mm and 10mm thickness is welded at bottom. |
| 6 | providing and fixing of Foreman Ring Dual or Parallel Bar made up of 2inch B class GI pipe: Prime Stand duly bend, Foundation center pipe.All welded joint are of good quality.High tensile steel with galvanized nut and bolts to be used.The powder coating done with Pure polyester powder with 60 to 70 micron thickness. |
| 7 | Providing and fixing of Eleptical Cross Trainer made up of 3inch B class GI pipe: Prime Stand duly bend, Foundation center pipe.60mm seamless pipe bushes. Permanent lubricated Ball bearings 6205zz/6205-2rs. Foundation plate of dia 175mm and 10 mm thickness is welded at bottom.All welded joint are of good quality.High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm. Allen Bolts are also used to tighten the closing cap. Closing cap of HDPE / PPCP Plastic is used. High quality rubber grip are also used for firm handling.The powder coating done with Pure polyester powder with 60 to 70 micron thickness |
| 8 | Providing and fixing of Sit-up Bench Sit Up Board equipment made up of 42mm OD “B” class GI pipe: Prime Stand duly bend.All welded joint are of good quality.High tensile steel with galvanized nut and bolts to be used.The powder coating done with Pure polyester powder with 60 to 70 micron thickness |
| 9 | Providing and fixing of Leg Press Dual equipment made up of 4inch B class GI pipe: Prime Stand duly bend, Foundation center pipe.60mm seamless pipe bushes.Permanent lubricated Ball bearings 6205zz/6205-2rs.All welded joint are of good quality. High quality rubber grip are also used for firm handling.High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm. Allen Bolts are also used to tighten the closing cap. Closing cap of HDPE / PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness. |
| 10 | Providing and fixing of Swing Dual/ Surf Board equipment made up of 4inch B class GI pipe: Prime Stand duly bend, Foundation center pipe. 60mm seamless pipe bushes.Permanent lubricated Ball bearings 6205zz/62052rs.Foundation plate of dia 225mm and 10 mm thickness is welded at bottom. All welded joint are of good quality. High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm. Allen Bolts are also used to tighten the closing cap. Closing cap of HDPE / PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness |
| 11 | Providing and fixing of Leg Raise Bar/s Push Up Bars equipment made up of 4inch B class GI pipe: Prime Stand, Foundation center pipe.All welded joint are of good quality. High tensile steel with galvanized nut and bolts to be used.Closing cap of HDPE / PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness. |
| 12 | Providing and fixing of Seated Rowing equipment made up of 3inch Bclass GI pipe: Prime Stand duly bend, Foundation center pipe.The pins used are made up of 25mm hardened bright bar.Permanent lubricated Ball bearings 6205zz/62052rs.All welded joint are of good quality.High quality rubber grip are also used for firm handling.The bushes (Stopper) used to avoid the collision.High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm. Allen Bolts are also used to tighten the closing cap. Closing cap of HDPE / PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness |
| 13 | Providing and fixing of Park Equipments.Spring Rocker |
| 14 | Providing and fixing of Park Equipment Spring See-Saw |
| 15 | Providing and fixing of Park Equipment Doli- Fibre |
| 16 | Providing and fixing of Park Equipment spril Slide 10 ft |
| 17 | Providing and fixing of Park Equipment Straight Slide |
| 18 | Providing and fixing of Park Equipment Double See-Saw |
| 19 | Supplying, fixing, and testing of washbasin pressmatic tap of approved make, made of heavy-duty brass body with chrome-plated finish, self-closing time delay mechanism (approximately 8–12 seconds), suitable for wall or deck mounting on ceramic or stone counter washbasins. The tap shall be complete in all respects, including all necessary fittings, washers, nuts, rubber gaskets, and connectors, and fixed as per manufacturer’s specifications and site requirements...Jaquar Pressmatic Tap PRS-CHR-061 |
| 20 | Providing and fixing of Double Twister/Standing Twister equipment made up of3inch B class GI pipe: Prime Stand duly,Foundation center pipe.60mm seamlesspipe bushes.Permanent lubricated Ballbearings 6205zz/6205-2rs.All weldedjoint are of good quality.High tensile steelwith galvanized nut and bolts to beused.The Circlips to be used are of25mm.Allen Bolts are also used to tighten theclosing cap.Closing cap of HDPE / PPCP Plastic isused.The powder coating done with Purepolyester powder with 60 to 70 micronthickness. |
| 21 | Supplying, Installation, Testing and Commissioning of Nozzle made with gunmetal Grade Geyser jet 100mmi with adjustable nozzle for height adjustment of the fountain etc. Complete as required. |
| 22 | Supplying, Installation, Testing and Commissioning of underwater Luminaries surface mounted RGB LED spot light 6 x 3W with IP 68 protection, SS/ aluminum dia casting body with power coated paint, soft rubber gasket along with 2 years free replacement guaranty etc. complete as required.. DSR 20.22 |
| 23 | Supplying, Installation, Testing and Commissioning of Signal Amplifier of RGB signal as require i/c connection along with 2 years free replacement guaranty etc. complete as required. DSR 20.26 |
| 24 | Supplying, Installation, Testing and Commissioning of ISI Marked openwell submersible pump set contain with stainless steel shaft and cast iron/SS body, the pump shall be designed to prevent over loading and having dynamically balanced rotating parts etc. the pump capable of delivering following capacities discharge at suitable head and lowering the pumps in water bodies and suitable for operation on 415V( plus -10%), 3-phase AC supply including providing required no`s of heavy duty M.S clamps made of flat iron and suitable size top cover made of suitable thick MS sheet including connection, interconnection ,supports etc. as required. suitable for 900LPM at 25 Mtrs Head etc. complete as required. DSR 20.16 |
| 25 | Supplying, Installation, Testing and Commissioning of 100 mm Dia Debris Collection Strainer in Stainless steel 304 gr etc. complete as reqd. DSR 20.13 |
| 26 | Supplying and fixing PVC insulated PVC sheathed copper conductor submersible flat cable ISI Marked in existing metal/ HDPE / PVC/ pipe/ in bore well/ in sump including fixing the cable to GI/HDPE pipe with suitable cable tags of following sizes etc. complete as required...3 Core 4.0 Sq mm Flat Cable. DSR 20.28.3. new |
| 27 | Supplying and fixing PVC insulated PVC sheathed copper conductor submersible flat cable ISI Marked in existing metal/ HDPE / PVC/ pipe/ in bore well/ in sump including fixing the cable to GI/HDPE pipe with suitable cable tags of following sizes etc. complete as required...3 Core 1.5 Sq mm Flat Cable DSR 20.28.1 |
| 28 | Supplying, Installation, Testing and Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency )85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency )85%,THD ( 10% as per IEC 61000-3-2, P. F.=0.95, IP-66,IK-10, CRI)70, under voltage and over voltage protection,EMI-EMC as per CISPR-15, lenses for beam angleas per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to65mm dia pipe, life time (LED,Driver and electricalcircuitary) of minimum 50000 Burning Hourswith 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11report, CCT 3000°K / 4000°K / 5700°K /6500°K (Asper ANSI Bin), SDCM(Standard Deviation ColorMatching) (5, Maximum power consumption shouldnot more than the specified rating and Fixture shallbe of relevant BIS standard complete in all 51 DELHI SCHEDULE OF RATES (EandM)-2025 respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy )135 lm/Watt output . LM79 and LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) DSR 8.14.1.2 |
| 29 | Providing and fixing fine dressed sand stone/approved stone Traditional work as per existing matching geometrical design including moulding work with fine finishing, fixing with thambli by proper adhesive and white cement with pigment including making groove etc. complete in all respect..SOR 40.59 |
| 30 | LED Batten light (System lumen efficacy )135 lm/Watt)Supplying, installation, Testing and Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency )85% ,Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short and Open circuit protection ,THD ( 10% , P.F.=0.95, IP20, CRI )80, Flicker free (flicker should be below 5 %), life time (LED, Driver and electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) (3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy )135 lm/Watt output . LM79 and LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness ) 1.20 mm) DSR 8.11.1 18-22 Watt |
| 31 | LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy =120 and (135 lm/Watt).Supplying, Installation, Testing and Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency )85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency )85%,THD ( 10% as per IEC 61000-3-2, P. F.=0.95, IP-66,IK-10, CRI )70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement, suitable tilt able fitting, life time (LED, Driver and electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) (5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy =120 and (135 lm/Watt output . LM79 and LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). DSR 8.16.3 100 Watt |
| 32 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40MM DSR 17.28.1.2 |
| 33 | Deduct - Recovery of brick work |
| 34 | Construction of City Park in MC Barwala. Please Enable Macros to View BoQ information |
