|
| 1 | Repair work of Bridge |
| 2 | 2.3.1.A:Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness In area of light jungle - By Manual Means |
| 3 | 13.5.E.P.1:Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M20 - Using concrete Mixer - Height upto 5m |
| 4 | 14.1.C.1:Furnishing and Placing Reinforced Cement Concrete Grade M30 Using Concrete Mixer in super-structure as per drawing and Technical Specification |
| 5 | 13.6:Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications |
| 6 | OD64830/2025-2026:Engaging Man Mazdoor for removing vegetation and accumulated earth from deck slab, assisting wood cutter clearing drainage sprout etc . |
| 7 | OD64827/2025-2026:Hire charges for Tipper for removing debris , Excess earth on the shoulder & removing other materials for the requirements of the work etc as per the direction of departmental officers at site. |
| 8 | 16.22:Repair of RCC Railing : Carrying out repair of RCC m30 railing to bring it to the original shape. |
| 9 | 55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete. |
| 10 | OD64829/2025-2026:Engaging wood cutter for cutting trees and branches standing in dangerous conditions |
| 11 | OD64825/2025-2026:hiring chainsaw with motor for wood cutting |
| 12 | OD64826/2025-2026:Engaging crane for cutting trees and tree branches etc |
| 13 | OD70360/2025-2026:Cleaning the expansion joint properly with a wire brush and coir brush, fitting aluminum strips dura brod on the joints at 10cm interval for holding the hose, providing polysulphide sealant for expansion joint.etc.complete for expansion joints of the bridge. |
| 14 | OD252427/2025-2026:Cement concrete for wearing coat complete as per Drawing and Technical Specification RCC Grade M-35 Surface shall be cleaned dust free using air blower. Epoxy bonding agent nito Bond Ep mfd by M/s. fosroc / Rearm bond EBA mfd by M/s. MYK Arment shall be applied prior to place concrete. M35 concrete admixed with hooked steel fibre mfd by M/s. Bekaert Dramix 4D 80/60BG or equivalent at dosage of 15Kg/m3 shall be placed to the prepared area up to a maximum thickness of 100mm -Using Concrete Mixer |
| 15 | 8.8:Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces |
| 16 | 55.10.1:Providing and erecting retro-reflectorised Object Hazard Marker 300mm x 900mm Providing and erecting retro-reflectorised Object Hazard Marker sign with 07 years warranty, manufactured as per IRC 67 USING Type IV ASTM D 4956-09 micro prismatic retro reflective sheeting fixed over aluminium sheetig, 2 mm thick / aluminium composit material sheeting 4 mm thick with suitable back support frame and supported on a mild steel angle iron post 75mmx75mmx6mm, firmly fixed 30cm above ground level by means of properly designed foundation with M 15 grade cement concrete 30cmx30x45cm, 45cm below ground level including painting all non-reflective faces with epoxy paint 2 coats over epoxy primer as per approved drawing and clause 801.300 mm x 900 mm Please Enable Macros to View BoQ information |
