|
| 1 | Sub-Head : Concrete Work |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | 1:2:4 (1 Cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 4 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | Sub-Head : Reinforced Cement Concrete |
| 6 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 8 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). |
| 10 | Sub-Head : Masonry Work |
| 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 12 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 13 | Sub-Head : Wood and P.V.C. Work |
| 14 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 15 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 16 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. |
| 17 | 50 mm |
| 18 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 19 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 20 | 250x10 mm |
| 21 | 200x10 mm |
| 22 | 150x10 mm |
| 23 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 24 | 100 mm |
| 25 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 26 | Twin rubber stopper |
| 27 | Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer-in-charge. |
| 28 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 29 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. |
| 30 | 30 mm thick plain PVC door shutters. |
| 31 | Sub-Head : Steel Work |
| 32 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. |
| 33 | 10 x 140 mm |
| 34 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with : |
| 35 | 4.0 mm thick glass panes. |
| 36 | Sub-Head : Roofing |
| 37 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 38 | (i)Single socketed pipes. |
| 39 | 110 mm diameter |
| 40 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 41 | Single tee with door |
| 42 | 110x110x110 mm |
| 43 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 44 | 110 mm |
| 45 | Sub-Head : Finishing |
| 46 | 12 mm cement plaster of mix : |
| 47 | 1:6 (1 cement: 6 fine sand) |
| 48 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 49 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 50 | Old work (one or more coats) |
| 51 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 52 | One coat. |
| 53 | White washing with lime to give an even shade : |
| 54 | Old work (one or more coats) . |
| 55 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 56 | One or more coats on old work. |
| 57 | French spirit polishing : |
| 58 | One or more coats on old work. |
| 59 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 60 | Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 61 | Sub-Head : Repairs to Buildings |
| 62 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 63 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 64 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 65 | Sub-Head : Dismantling and Demolishing |
| 66 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 67 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 68 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 69 | Of area 3 sq. metres and below |
| 70 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 71 | Of area 3 sq. metres and below |
| 72 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 73 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 74 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 75 | Sub-Head : Sanitary Installations |
| 76 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 77 | Orissa pattern W.C. pan of size 580x440 mm |
| 78 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 79 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 80 | 10 litre capacity - White |
| 81 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 82 | White solid plastic seat with lid |
| 83 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 84 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 85 | Flat back wash basin of size 550x400 mm. |
| 86 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 87 | Semi rigid pipe |
| 88 | 32 mm dia |
| 89 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 90 | Sub-Head : Water Supply |
| 91 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 92 | 20 mm nominal outer dia. Pipes. |
| 93 | 25 mm nominal outer dia .Pipes. |
| 94 | 40 mm nominal outer dia. Pipes. |
| 95 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 96 | 50 mm nominal outer dia. Pipes. |
| 97 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 98 | 45 cm length |
| 99 | 20 mm nominal bore |
| 100 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: |
| 101 | 15 mm nominal bore. |
| 102 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 103 | 15 mm nominal bore. |
| 104 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 105 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 106 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 107 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 108 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 109 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 110 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 111 | With common burnt clay F.P.S. (non modular) bricks. |
| 112 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
| 113 | Sub-Head : Aluminium Work |
| 114 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 115 | For fixed portion |
| 116 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 117 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 118 | Pre-laminated particle board with decorative lamination on both sides. |
| 119 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 120 | With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) |
| 121 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 122 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 123 | With stainless steel cover plate minimum 1.25 mm thickness. |
| 124 | Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge |
| 125 | Anodized (AC 15 ) aluminium |
| 126 | Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete complying to ASTM C920, DIN 18540-F & ISO 11600. |
| 127 | Upto 5mm depth and 5 mm width |
| 128 | Sub-Head : Water Proofing |
| 129 | Grading roof for water proofing treatment with |
| 130 | Cement mortar 1:3 (1 cement : 3 coarse sand) |
| 131 | Sub-Head : MARKET RATED ITEMS |
| 132 | Supplying & engaging unskilled labour along with T&P for cleaning of roof terrace , chajja, rain water pipe mouth, drains & cleaning of bushes ,jungles etc. as & when required as per direction of Engineer-in-Charge. |
| 133 | Providing & erecting single scaffolding system on the external side of building upto three storey height made of best quality bamboo ballies @ 1.5 m centre to centre in both directions including bracing & stiffening as required. |
| 134 | Shifting and re-fixing of scaffolding materials for removing trees from the external walls and roofs of staff Qtrs. up to height about 10.00 mtr.as per the direction of E-I-C. |
| 135 | Providing and fixing CP hygenic health faucet with flexible chrome hose, handset & bracket of Jaquar(Jaquar ALD-CHR-573) or equivalent make as per the direction of E.I.C. |
| 136 | Providing and fixing on wall face unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 137 | (i) Single socketed pipes. |
| 138 | 110 mm dia |
| 139 | Easing and adjusting of Door/window shutter(steel/wood)for free movement of the same by making minor mending / repair to the shutter & frame including providing steel screws wherever required all complete per direction of Engineer-in-charge. |
| 140 | Cleaning of choked manhole chambers including removing the waste & sludge deposits and flushing of sewer line between manholes with sufficient water while rodding with split bamboo etc. all complete as per direction of Engineer-in-Charge. |
| 141 | Trimming / pruning of trunks and branches of trees of girth upto 30 cm including making all safety arrangements & disposal of waste materials in the dumping bin / yard etc complete as per direction of Engineer-in-charge. |
| 142 | Credit for taking into possession unserviceable dismantled GI / CI pipes & fittings |
| 143 | Credit for taking into possession unserviceable recovered water supply fittings / fixutures such as brass/c.p. brass/gun metal bib-cock, stop-cock, pillar cock, gate valve upto 25 mm dia and the like on as is where is condition. |
| 144 | Carrying out horticulture maintenance operation of BSNL Bhawan compund and its front area consisting of : (1)Watering of plants daily, (2)Cultivation and weeding of planter beds and lawns fortnightly. (3)Cleaning of planter beds daily, (4)Applying manure/ Fertiliser/ Pesticide/ Termicide as per requirement, (5)Planting of seasonal flower plants as per approved pattern, (6)Top dressing of planter boxes etc. with soil &/or manure, (7) Repair and replacement of diseased/ dead plants, (8)Levelling of planter beds etc. as per requirement, (9)Care and protection of outdoor and indoor potted plants and trees as needed, (10) providing all T&P, flexible PVC pipes with accessories for watering etc complete as per direction of Engineer-in-charge. The Contractor shall use departmental water free of cost. The cost of new plants, manure/ fertiliser, presticide/ termicide, good eath shall be paid by the department. |
| 145 | Periodic mowing of lawn with machine including pruning and trimming of trees / shrubs / creepers etc to required shape along with cutting of hedge in and around BSNL Bhawan compound complete as per direction of Engineer-in charge. |
| 146 | Supplying and stacking of well digested cow dung manure at site including carriage complete (Cow dung manure measured in stacks will be reduced by 8% for Payment). |
| 147 | Supplying and stacking of good earth at site including royality and carriage etc. complete (earth measured in staks will be reduced by 20% for payment) |
| 148 | Supplying, stacking and placing at site live out door flowering plants along with required size standard earthen /PVC pot filled with good earth and manure as required etc complete as per direction of Engineer-in-charge. |
| 149 | Marigold |
| 150 | Dahlia |
| 151 | Supplying chemical insecticide Dimethoate 30% E.C of Rogor-plus or equivalent brand in sealed containers includign delivery as per direction of Engineer-in-charge. |
| 152 | Supplying and stacking of earthen pot of 300mm dia and of 300mm height for planting flower/decorative plants all complete. |
| 153 | Easing of steel rolling shutter by lubrication, greasing and oiling of moving parts such as rollers, axles, guide rails and any other joints or mechanisms that require free movement to reduce friction and ensure smooth operation etc all complete as per direction and upto satisfaction of Engineer-in-charge. |
| 154 | Providing and fixing ACP placard of size 2'x1' with radium sticker lettering with 20mm steel squre post of 1.20 mtr height including supplying of Baula or equivalent plant, towel ,organic manure,hand wash and sanitizer for the plantation function during the visit of distinguished dignitaries to BSNL Bhawan at Bhubaneswar. |
| 155 | Providing and fixing CP Pillar cock for wash basin as per the direction of Engineer-in charge. |
| 156 | 15mm nominal bore |
| 157 | Providing and laying polyster non-woven low pile red carpet with flexible PVC backing for ceremonial events including fixing on the floor or pavement in approved pattern with appropriate adhesive tape to ensure an even surface free from wrinkles, bumps & ridges etc all complete as per direction and upto satisfaction of Engineer-in-charge. The agency has to engage one labour throughout the event to watch & rectify distortions, if any & remove the carpet, roll it into bundles & handover the same to AD(PR), O/o CGMT, BSNL, Bhubaneswar for future reuse, if required . |
| 158 | Renewing suspended false ceiling tiles damaged due to rodent attack with 16 mm thick acoustic tegular edge mineral fiber ceiling tiles of size 600x600 mm of Armstrong (Armstrong Classic lite RH99) or equivalent make including removing the damaged pieces & disposing the same in municipal garbage vat etc all complete as per direction & upto satisfaction of Engineer-in-charge. The rate is for complete item including materials, labour, T&P, carriage & sundries etc and the area of full pieces of tiles either used as it is or cut into pieces for use shall be measured for the purpose of payment.Wastage due to cutting into pieces will be at the cost of BSNL. Please Enable Macros to View BoQ information |
