|
| 1 | Earth work in excavation embankment including lead upto 30 m & lift up to 1.5m excluding mechanical compaction but including mannualy compaction and dressing to profile . |
| 2 | Earth work in Foundation on channels of discharge above 10 Cumec including lead upto 30 M lift upto 1.50 M its disposal and back filling . |
| 3 | Centering & Shuttering for PCC in foundation and porcupine including cost of shuttering. |
| 4 | Centering & Shuttering for RCC & PCC Work including rent of shuttering ,material,labour and T&P required for completion of work for slab and etc. |
| 5 | Mild Steel or Iron Plain work such as reinforced concrete (when not included in an over all rate ) wrought to required shape as neccessory including bending supply of all steel and wastages and over lapping and hooks . |
| 6 | Supply/ laying of cemant concrete PCC 1:3:6 with dala grit and chopan sand |
| 7 | Supply & laying of PCC 1:4:8 with 20mm to 40 mm size dala grit and coarse sand not less than 2.0 F.M.including cost of all material ,labour and T&P etc. |
| 8 | Supplying & laying of R.C.C( 1:1.5:3 )with 10 mm to 20 mm size stone grit and coarse sand not less than 2.0 F.M. including cost of all materials ,labour T&P etc. |
| 9 | Supply & laying of P.C.C 1:2:4 with 10 mm to 20 mm size stone grit and coarse sand not less than 2.0 F.M.including cost of materials ,labour T&P etc. |
| 10 | Painting of Gauge post / pillar on channels include cost of all material ,plaster of paris ,whiting glue,colour,lime distemper ,paint,etc. brushessand paper and all other sundries required for completion of work . |
| 11 | Fabrication and supply sign board (1.0MX1.20M size) on angle Iron frame 40 X40 X6 mm,25 X3 mm flate Iron Bracing sand 18 SWG MS Sheet with one coat of red Oxide primer including cost of all mateials Labour,T&P etc. required for completion of work . |
| 12 | Painting two coat of synthetic enamel paint on new surface with superior quality approved ,including cost of all material Labour T&P etc. required for completion of work . |
| 13 | Writing letter on signboard above 50mm size but below 80 mm size . |
| 14 | Writing letter on signboard above 80mm size . |
| 15 | Earth Work in Making / construction of coffer bund by Power Transport Earth for a lead upto 1.0 KM of 2.00 mtr dia including cost of excavation loading ,unloading ,manual compaction and dressing including all lift rate shall be applicable for lead beyan |
| 16 | Hiring of diesel pump /Hiring Charge of 5 K.V Gen set including sunction and delivery pipe , Operator & Khalasi and P.O.L.complete with all respect . As per I&WRDUP , |
| 17 | Supply and laying graded filter with dala stone grit 12.50 mm to 20.00 mm including cost of all materials ,Labour ,T&P etc. |
| 18 | Supply and laying graded filter with coarse sand FM not less than 2.0 including cost of all materials ,Labour ,T&P etc. |
| 19 | Earth work in Foundation of masonary work on channel of discharge above 10 cumec including lead upto 30 m lift up to 1.5m and its disposal and back filling for building works. |
| 20 | Supply and Laying of Brick Ballast 40 mm gauge including cost of all material ,Labour T&P etc. |
| 21 | Supply and Laying of Local sand including cost of all material ,Labour T&P etc. |
| 22 | Supply and Laying of flate Brick solling for apron including cost of all material ,Labour T&P etc. |
| 23 | Supply & Laying of flush pointing (1:3)over brick solling for apron including cost of all materials Labur T&P etc. |
| 24 | Supplying & Laying of mortor (1:4) over roof slab including cost of all materials ,Labour T&P etc. |
| 25 | First Class Brick work in 1:4 cement and chopan sand mortar including cost of all material,labour ,scafolding and T&P etc.required for proper completion of work. |
| 26 | Cement plasterin 1:4 on Brick masonary with sand mortor including cost of material ,Labour scofolding and T&P etc. required for proper completion of work . |
| 27 | Distempering two coat of oil bound distemper of approved make of Burger ,Jenson & Nicholsen,Shalimar ,Asian ,Nerolac.over one priming coat of cement primer on new surface after thoroughly brushing the surface free from mortor droping and other foregin matter and also including prepairing the surface even with plaster of paris/shifting and sand papered smooth including cost of all material, labour T&P etc.required for completion of work. |
| 28 | Providing and fixing pressed steel door & window frame confirming to IS 4351 manufatured from commercial mild steel of 1.2 mm thickness including hing ,jamb, lock jamb beadand if required angle threshold of mild steel angle of section 50x25 mm or base tie of 1.0 mm pressed mild steel welded or rigidly fixed together by mechanical means adjustable lugs with split end tail to reach jamb including steel but hing 2.5mm thick with mortor guard ,lock strike plate and soft absorvers as specified as and applying a coat of approved steel primer after pre treatment of the surface as directed by engineer in charge. |
| 29 | Supplying & Fixing of flush door 40mm thick commercial quality confirming to I.S.2202 Part I (1983) including Fixing of wooden ccleat s and stopper and including fixing and adjustment of hing bolt lock handle spring fitting with necessary screw to be supplied by departmental. |
| 30 | Painting two coat over priming coat (but excluding cost of priming coat on steel/new wood surface and other metal surface including cleaning the surface of all dirt and dust other foregin matter sand prepairing and stooping including cost of all materials ,Labour ,T&P etc.as required for completion of work paint shall be used as per standard IS specification . |
| 31 | Providing and fixing 1.0mm M.S.thick sheet sliding shutter with frame & diagonal braces of 40x40x6 mm angle Iron 3.0 mm M.S.Gusset plate the junction and comer 25 mm dia pully 40x40x6 mm angle T Iron guide at the top and bottom resprctivly including apply |
| 32 | Supplying & fixing Galvanized mosquto havy quallity Iron wir gauge of expanded metal havy quallity our window and including C.P. teak wood batten 3.0x10.00 proper completion with server and including supply of all in materials and T&P etc required for com |
| 33 | P/F Indian Type white verteous china (Orrisa pattern ) W.C.pan size 580x440mm Indian make of approved quality including cost of material . |
| 34 | Supply of PVC Bend of 100 mm dia including cost of all materials,Labour ,T&P,etc. |
| 35 | Supply of PVC pipe of 110 mm dia including cost of all materials,Labour ,T&P,etc. |
| 36 | 50 mm to 75 mm Boring of Hand pump including lowering of assmbly and extraction of casing pipe including all cost of materials ,labours ,T&P etc. |
| 37 | E/W in filling by transport for a lead up to 1 km including excavation ,loading ,unloading , manual compaction and dressing including all lift rates shall be applicable for lead beyond upto 1 Km . complete in all respect. |
| 38 | Supply , installation ,testing and commissioning of gride intractive roof top solar phto voltaic power genration system including space frame .As per PAR Sl.No 6.8 Please Enable Macros to View BoQ information |
