|
| 1 | M&L for preparation of old treated horizontal concrete or bituminous roads, pavements surfaces exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with one coat of water thinable /matt finished road marking paint white/orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine line lazer IV 3900/ and 5900 of M/S Graco or equivalent as approved complete all as specified and as directed. |
| 2 | M&L for preparation of newly untreated horizontal concrete or bituminous surfaces exceeding 10cm width or girth with wire brushes etc. and painting lines, dashes, strips, circles and other markings with one coat of water thinable /matt finished road marking paint white/ orange/ yellow/black or any other colour as approved by GE using mechanical pavement marking machine line lazer IV 3900/ and 5900 of M/S Graco or equivalent as approved complete all as specified and as directed. |
| 3 | M&L for preparation of old treated horizontal concrete or bituminous surfaces not exceeding 10cm width or girth with wire brushes etc. and painting lines, dashes, strips, circles and other markings with one coat of water thinable /matt finished road marking paint colour white /orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine line lazer IV 3900/ and 5900 of M/S Graco or equivalent as approved complete all as specified and as directed. |
| 4 | M&L for preparation of newly untreated horizontal concrete or bituminous surfaces not exceeding 10 cm width or girth with wire brushes etc. and painting lines, dashes, strips, circles and other markings with one coat of water thinable /matt finished road marking paint colour orange /yellow/black or any other colour as approved by GE using mechanical pavement marking machine line lazer IV 3900/ and 5900 of M/S Graco or equivalent as approved complete all as specified and directed. |
| 5 | M&L for applying one coats of synthetic enamel paint in patches including preparation of old painted brick/stone/concrete/plastred surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 6 | M&L for applying One coat of white wash on old wall / concrete surfaces, including preparation of surfaces, complete all as specified and directed. |
| 7 | Edge Scraping of runway, PTT, Taxi tracks, Dispersal area by cutting grass, vegetation, shrubs, bushes, small trees etc. manually to the entire satisfaction of Engineer-in-Charge including sweeping and removal of entire rubbish/cut grass/ vegetation etc. outside MoD land complete. |
| 8 | M&L for Cleaning of open drains/Nalas having size as under by removing grass/vegetation/sarkanda etc including removing of earth, mud, stone aggregate/boulders, brick bats or rubbish etc. filled inside /alongside the drain(s) to the entire satisfaction of Engineer-in-Charge and removal the same outside MoD land complete: - |
| 9 | Drains/Nalas having any depth but bottom width more than 400 mm |
| 10 | Drains/Nalas having any depth but bottom width less than 400 mm |
| 11 | NOTE for item 8.01 & 8.02: For measurement, area shall be measured as inner girth of drain i.e bottom and two sides of drain. Please Enable Macros to View BoQ information |
| 12 | NOTE for item 8.01 & 8.02: For measurement, area shall be measured as inner girth of drain i.e bottom and two sides of drain. Please Enable Macros to View BoQ information |
