|
| 1 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes(Dia) (h)80 mm |
| 2 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (B) Socket (Dia) (h) 80 mm |
| 3 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (C) Elbow (Dia) (h) 80 mm |
| 4 | Cast Iron ball valve (Flange Type) with stainless steel ball & CI body and MS Bolt-nuts and drilling as per specification. Diameter in mm 80 |
| 5 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (G) Flange (Dia) (h) 80 mm |
| 6 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (L) Reducing Socket (mm X mm) (k) 80 X 40 |
| 7 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes(Dia) (e) 40 mm |
| 8 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (B) Socket (Dia) (e) 40 mm |
| 9 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (L) Reducing Socket (mm X mm) (f) 40 X 32 |
| 10 | SUPPLY OF PVC PIPES & FITTINGS SCHEDULE 80 (MEDIUM DUTY) CONFORMING TO ASTMD - 1785 AND THREADED TO MATCH WITH GI PIPES AS PER IS : 1239 (PART - I). (A) PVC PIPES(DIA) (D) 32 MM REF: PWD SANITARY & PLUMBING-2017 PAGE 5 OF 124 |
| 11 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (C) Elbow (Dia) (d) 32 mm |
| 12 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (E) Tee (Dia) (d) 32 mm |
| 13 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (I) Union (Dia) (d) 32 mm |
| 14 | SUPPLYING, FITTING AND FIXING GUNMETAL WHEEL VALVE OF APPROVED BRAND AND MAKE TESTED TO 21 KG PER SQ. CM. (FOR WATER LINES ONLY). (VI) 32 MM DIA REF: PWD SANITARY & PLUMBING-2017 PAGE 5 OF 124 |
| 15 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (G) Flange (Dia) (d)32 mm |
| 16 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (J) Threaded End Cap (Dia) (d) 32 mm |
| 17 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (B) Socket (Dia) (d) 32 mm |
| 18 | Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth |
| 19 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar (a) 20 mm thick plaster |
| 20 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. |
| 21 | Sub Total |
| 22 | CGST 9% |
| 23 | SGST 9% |
| 24 | CESS 1% Please Enable Macros to View BoQ information |
