|
| 1 | Sub Head-1 Internal Water Supply System |
| 2 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. |
| 3 | b) CPVC SDR 11 Pipe & fitting 20mmo/d |
| 4 | c) CPVC SDR 11 Pipe & fitting 25mmo/d |
| 5 | EXTERNAL IN THE GROUND : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI markedwith the prior approval of Engineer-inCharge), having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, & testing of joints excluding cost of excavation complete as per direction of Engineer-in-Charge |
| 6 | d) CPVC SDR 11 Pipe & fitting 32mmo/d |
| 7 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.Size 75mm x 75mm |
| 8 | qty same as CPVC P 20mm +25 mm |
| 9 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 10 | Through wall 11.43 cm thick |
| 11 | Through wall 22.86 cm thick |
| 12 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. |
| 13 | 25mm i/d Brass Ball valves |
| 14 | Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects. |
| 15 | Sub Head-2 Internal & External Sewerage System |
| 16 | Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. |
| 17 | Eurpoean/Indian/Orissa W.C., |
| 18 | PVC / China Ware Cistern |
| 19 | Wash Hand Basin / Urinal Pot |
| 20 | CP Bib Cock/Angle Cock/StopCock/Shower/Bottle Trap |
| 21 | Wall mixer / Sink Mixer / Basin Mixer /Concealed Stop Cock |
| 22 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonagepipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. |
| 23 | Single Socket Type B |
| 24 | b) 110mm o/d SWR UPVC pipe lines laid complete |
| 25 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. |
| 26 | For 110mm o/d pipes |
| 27 | ii)Single Tee With Door |
| 28 | iii) Single Tee |
| 29 | iv)Door Elbow 90 Degree |
| 30 | v) Elbow 90 Degree (all side socketed) |
| 31 | vi) Vent Cowls |
| 32 | viii) Coupler |
| 33 | ix) P Trap/Floor Trap 110mm x 110mm |
| 34 | xi) Single Y-Junction |
| 35 | Elbow 45 degree |
| 36 | Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge ) |
| 37 | 110mm o/d |
| 38 | Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm |
| 39 | 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm |
| 40 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sandmortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cementconcrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weightas per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. |
| 41 | 450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal |
| 42 | Cement concrete 1:2:4 |
| 43 | a With stone ballast or shingle |
| 44 | mixing by mechanical means using concrete mixer volumetric type |
| 45 | Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. Size 160mm o/d |
| 46 | Sub Work-3 Dismatling , Civil work, Flooring and Wall Tile |
| 47 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 48 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 49 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material |
| 50 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black ofsize 600 x 300 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 51 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. |
| 52 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 53 | Sub Head-4 Sanitary Installation |
| 54 | Providing and fixing in position Chinawareextended wall mounted E. W.C. type suite(size 66 x 46 x 77.5 cm ) with P trap or S trapof approved make (to the approval of theEngineer-in-charge) with or without 10 ltr.chinaware matching flushing cistern and seatcover complete in all respect and to theentire satisfaction of Engineer-in-charge |
| 55 | Chinaware wall mounted E.W.Cwithout cistern including seatcover complete in all respect. |
| 56 | Providing and fixing in position concealedcistern including flushing plate of approvedmake (to the approval of the Engineer-incharge)complete in all respect. |
| 57 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked,PVC short bend32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge |
| 58 | Providing and fixing Stainless steel health faucet complete in all respect |
| 59 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 60 | C.P. Brass Pillar Cock foam flow |
| 61 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. |
| 62 | C.P. brass towel Rails size 15mm dia 610mm long |
| 63 | C.P brass towel ring |
| 64 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in allrespect |
| 65 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) |
| 66 | Size 600mmx450mm |
| 67 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect |
| 68 | C.P. brass Bib cock long nose/long body foam flow without flange |
| 69 | C.P. brass Bib cock foam flow without flange |
| 70 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect |
| 71 | PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut |
| 72 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 73 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect |
| 74 | C.P.brass 15mm Concealed stop cock with flange. |
| 75 | C.P.brass 15mm Angle valve without flange |
| 76 | Providing and fixing in position automatic brass Ball Cock intanks. iii)25mm i/d |
| 77 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. |
| 78 | G.I. tank nipple 25mm i/d |
| 79 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 80 | 20mm i/d G.I. Union |
| 81 | 25mm i/d G.I. Union |
| 82 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 83 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect. |
| 84 | C.P. Brass extension piece, 25mm long to 50mm long |
| 85 | Providing & Fixing in postion liquid soap container of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 86 | acrylic liquid soap container |
| 87 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. |
| 88 | Construction of Plateform complete as per specification & as desired by Enginer-in-charge |
| 89 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete inall respect. |
| 90 | Providing and fixing in position SS Gratingwith frame of approved make (to the approval of engineer in charge) complete in allrespects |
| 91 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge)including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. |
| 92 | Size 630 mm x 450 mm x 830 mm |
| 93 | Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. |
| 94 | Vitreous chinaware standard white pedestal for wash hand basin. |
| 95 | Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mmouter length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete. Please Enable Macros to View BoQ information |
