|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removing from site complete all as specified and directed. |
| 3 | Taking down shutters of any description exc. 1.0 Sqm and n. exc. 2.0 Sqm each and removing to or from store complete all as specified and directed. |
| 4 | Taking down shutters of any description n. exc. 1.0 Sqm each and removing to or from store complete all as specified and directed. |
| 5 | M&L for resecuring or easing and adjusting without taking down shutters of any description exc. 1.0 Sqm and n. exc. 2.0 Sqm each complete all as specified and directed. |
| 6 | S&F standard grade WPC door frames of size 100mm x 65mm for doors with single rebate including all necessary fixing lugs or clamps complete all as specified and directed by Engineer-in-Charge. |
| 7 | S&F solid PVC frame (single rebated) of size 60mm x 30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing complete all as specified and directed.Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly. |
| 8 | S&F factory made solid WPC flush door shutters 28 to 30 mm thick, natural wooden painted on both sides complete all as specified and directed by Engineer-in-charge. |
| 9 | M&L for factory made solid PVC moulded door shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face and 2mm plain colour PVC sheet on back face, with wood free EPS, supplying and fixing in frame at site as per specification and drawing complete all as specified and directed. |
| 10 | S&F 30mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed. |
| 11 | M&L for flush shutters, 30mm thick solid core construction, with block board core and plywood face panels, all as specified and for 0.90 mm thick decorative laminate type 1 on both side, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 12 | S&F stainless steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 13 | S&F in repair stainless steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 14 | M&L for 2nd class softwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, area exc. 3.0 Sqcm and n. exc. 6.0 Sqm complete all as specified and directed. |
| 15 | S&F in repair sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n. exc. 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden/ metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 16 | S&F 150mm extruded aluminium alloy handles, cast type complete all as specified and directed. |
| 17 | S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as specified and directed by Engineer-in-Charge. |
| 18 | S&F butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and directed. |
| 19 | S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 20 | S&F 150mm floor door stopper of aluminium alloy body and tongue andodised with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 21 | S&F 200mm mild steel barrel tower bolts, stove enamelled black with bright bolt and fixed complete all as specified and directed. |
| 22 | S&F 250mm mild steel sliding door bolts, clip type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 23 | S&F mild steel butt hinges, medium weight, cold rolled, ISI marked of size 100mm complete all as specified and directed. |
| 24 | S&F 150mm mild steel pressed handles oval type stove enamelled black complete all as specified and directed. |
| 25 | S&F in repair 300mm, mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specifed and directed by Engr-in-Charge. |
| 26 | S&F framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 27 | M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide or zinc chrome primer complete all as specified and directed. |
| 28 | M&L for preparation of new wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of aluminium wood primer complete all as specified and directed. |
| 29 | M&L for welding in repairs n. exc. 2.5 cm in length, thickness of metal to be welded n. exc. 6 mm complete all as specified and directed. |
| 30 | S&F 12mm thick toughned glass in square or rectangular shape, area exc. 1.50 Sqm but n. exc. 4.00 Sqm, including stainless steel bracket and other suitable accessories to fix door on floor spring and top pivot with 2 Nos stainless steel door handle of length 300mm and mortice lock for each door complete all as specified and directed by the Engineer-in-Charge. |
| 31 | S&F aluminium powder coated aluminium frame for doors, windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc. completet all as specified and directed.Note:- Thickness of powder coating is 50 micron. |
| 32 | M&L in repairs 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work complete all as specified and directed. |
| 33 | S&F aluminium powder coated door shutters of any colour (thickness of powder coating not less than 50 micron), aluminium sections weighing 0.55kg/m including necessary joining cleat glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminium snap beading screws complete all as specified and directed. |
| 34 | S&F aluminium powder coated window and ventilator shutter side hung type without sashbar of any colour (thickness of powder coating not less than 50 micron), aluminium sections weighing 0.55kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws, peg stay 150mm long -1 No, hinges type B-21 100mm long - 2 Nos, suitable handle - 02 No in each door, hinges, aluminium snap beading screws complete all as specified and directed. |
| 35 | S&F in repairs 7mm thick aluminium grill of make Deco grill DG-104 model fitted into suitable aluminium channel and fixed to windows/ ventilators including channel complete all as directed by Engr-in-Charge. |
| 36 | S&F sheet glass 5.5mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square exc. 0.5 sqm in each pane complete all as specified and directed. |
| 37 | S&F 5mm thick froasted glass panes and glazing with oil putty or fix in aluminium door/ window exc. 0.5 Sqm in each pane complete all as specified and directed. |
| 38 | M&L for venetian blinds, vertical type, 100mm wide with polyster fabric of approved colour and pattern with aluminium fittings and top rail and nylon buttons/ loops etc. fixed cuttings and alteration if necessary wherever AC/ coolers exists including dismantling old unserviciale venetian blinds complete all as specified and as directed by Engr-in-Charge. |
| 39 | M&L for repairing aluminium doors exc. 1.50 Sqm but n. exc. 5.00 Sqm including necessary joining cleat, glazing clips, rubber neoprene packing, handles - 02 Nos. in each door, hinges, anodised aluminium snap beading screw etc. including chowkhat and refixing in the same opening after complete repairs except glass complete all as specified and directed. |
| 40 | M&L for repairing aluminium doors not exc. 1.50 Sqm including necessary joining cleat, glazing clips, rubber neoprene packing, handles - 02 Nos. in each door, hinges, anodised aluminium snap beading screw etc. including refixing in the same opening after complete repairs except glass complete all as specified and directed. |
| 41 | S&F in repairs, aluminium (die cast body) door closer, hydraulically regulated, designation No 1, universal type, suitable for door shutters upto 700mm in width and of weight not more than 35 kg complete all as specified and directed. |
| 42 | S&F in repairs double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 43 | S&F in repairs brass mortice lock, vertical type of size 100mm, 2 levers complete all as specified and directed. |
| 44 | Dismantling of boarding of any description fixed in any position with nails complete all as specified and directed. |
| 45 | S&F 18mm thick solid PVC ply of 1st quality of approved colour and fixed with screw, solvent cement/ adhessive complete all as specified and directed by Engineer-in-Charge. |
| 46 | S&F 18mm thick solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/ adhessive complete all as specified and directed by Engineer-in-Charge. |
| 47 | S&F 40mm dia cupboard knobs fixed with nut screw and washer of mild steel bright bolt complete all as specified and directed. |
| 48 | S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap 30 mm complete all as specified and directed. |
| 49 | S&F four lever brass locks for cupboard/ glass doors, grade I, size 50mm complete all as specified and directed. |
| 50 | S&F magnetic catcher for wardrobe, cup-boards etc. complete all as specified and directed. |
| 51 | S&F in repairs stainless steel curtain rod of dia 20 to 25 mm as approved complete all as specified and directed. |
| 52 | S&F stainless steel bracket for holding curtain rods and curtain rod end finials of stainless steel of dia 20 to 25 mm as approved complete all as specified and directed. |
| 53 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 54 | S&F anodised aluminium snap grid frame work (600mm x 600mm) for false ceiling complete all as specified and directed. |
| 55 | S&F 8 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid for exposed metal frame ceiling complete all as specified and directed.Note:- Frame work for ceiling shall be measured and paid separately. |
| 56 | M&L for preparation of new decorated plastered or unplastered surfaces of ceilling and applying two coats of oil bound distemper white or tinted over and icluding a coat of white putty in patches as required complete all as specified and as directed by Engineer-in-Charge. |
| 57 | M&L for providing and injecting post constructional anti-termite treatment along the external wall in plinth protection using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 58 | M&L for providing and injecting post cvonstructional anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2) (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed. Please Enable Macros to View BoQ information |
