|
| 1 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/ dense soil complete all as specified and as directed. |
| 2 | M & L Cement concrete 1:4:8 type D-2 in foundations, filling and mass concrete complete all as specified and as directed. |
| 3 | M & L for Reinforced cement concrete type B-1, 1:2:4, using 20mm graded stone aggregate as in footings, plinth beams and mass concrete complete all as specified and as directed. |
| 4 | Use and waste of form work to sides of concrete foundations, footings, plinth beams for rough finished concrete surfaces complete all as specified and as directed. |
| 5 | M & L RCC nominal mix 1:2:4 type B-1 using 20mm graded aggregate as in lintels upto 1.5m clear and other similar bands, including form work complete all as specified and as directed. |
| 6 | S & F TMT steel bars 10mm dia and over, cut to length bent to shape required as in reinforcement to lintels complete all as specified and as directed. |
| 7 | All as per item No-6 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups complete all as specified and as directed. |
| 8 | M & L for old size Brick work with fly ash bricks straight or curved on plan and 6 metre mean radius built in CM 1:6 complete all as specified and as directed. |
| 9 | M & L for Rendering 10mm thick in CM 1:6 on wall or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed. |
| 10 | M & L for rendering 10mm thick in CM 1: 6 as under layer and 5mm thick in CM 1:4 mixed with water proofing compound as finishing layer to external wall surfaces and finishing the surface even and smooth complete all as specified and as directed. |
| 11 | Preparation new/ old walls surfaces and applying two coats of exterior weather proof paint over a coat of weather proof primer to all external wall surfaces complete all as specified and as directed. |
| 12 | Preparation new walls surfaces and applying three coats of white wash to all internal wall surfaces complete all as specified and as directed. |
| 13 | Complete removal of existing treatment on walls and applying three coats of white wash to internal wall surfaces complete all as specified and as directed. |
| 14 | Complete removal of existing treatment and applying three coats of white wash to ceiling surfaces complete all as specified and as directed. |
| 15 | M & L Hardcore (stone) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 16 | M & L 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base floor complete all as specified and as directed. |
| 17 | M & L for 100mm thick cement concrete, 1:2:4, type B-1 using 20mm graded stone aggregate as in floor finishes complete all as specified and as directed. |
| 18 | M & L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 19 | S & F 35mm thick factory made 2nd class hardwood rail and style plain framed panelled shutter two panels with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces complete all as specified and as directed. |
| 20 | S & F 100mm size mild steel butt hinges, medium weight, cold rolled fixed with stainless steel screw with frame complete all as specified and as directed. |
| 21 | S & F Aluminium anodised barrel tower bolts of extruded section 200mm size complete all as specified and as directed. |
| 22 | S & F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and as directed. |
| 23 | S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. |
| 24 | M & L for preparation of new wooden surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 25 | M & L for FI hold fast 25x3mm, 300mm long complete all as specified and as directed. |
| 26 | M & L for providing pre-cast cement concrete, type B-0 1:2:4, (12.50mm graded aggregates )and jallies 75mm thick set in CM 1:4 complete all as specified and as directed. |
| 27 | Demolition of unreinforced concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) and disposed off from site complete all as specified and as directed. |
| 28 | M & L for 25mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in levelling course complete all as specified and as directed. |
| 29 | M & L for screed bed 20mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed. |
| 30 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment or mat complete all as specified and as directed. |
| 31 | M & L for Rounding to edges of Granite/ stone slabs one edge such as in steps, cooking platforms and other similar situations complete all as specified and as directed. |
| 32 | M & L for making impressions on granite stone to have unslippery to plain granite surfaces complete all as specified and as directed. |
| 33 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 34 | Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 35 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 36 | Demolition of brickwork or stone/ boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 37 | Taking down chowkats or frames with shutters (without taking off shutters from frames) exc 1.5sqm but n.exc 4 sqm each including making good disturbed surfaces complete all as specified and as directed. |
| 38 | Taking down shutters of any description n.exc 1sqm each complete all as specified and as directed. |
| 39 | Taking down shutters of any description exc 1sqm but n.exc 2sqm each complete all as specified and as directed. |
| 40 | S & F Anodised aluminium (minimum 50 micron) frame for doors, windows, ventilators and grills/guard bars etc. with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 41 | S & F Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. anodised alum fittings such as peg stays, handles complete all as specified and as directed. |
| 42 | S & F Sheet glass 4mm thick, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane and fixed to aluminium frame using rubber packing complete all as specified and as directed. |
| 43 | S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, handles 2 nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 44 | S & F 9mm thick pre laminated particle boards, exterior grade, prelaminated both sides with decorative choice lamination fixed with screws to alum frame work for doors and cub boards door shutters complete all as specified and as directed. |
| 45 | S & F Sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane and fixed to aluminium frame using rubber packing complete all as specified and as directed. |
| 46 | S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 47 | S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 48 | S & F Factory Made Solid PVC Moulded Door Shutters 28 to 30mm thick with wood free EPS (stiles) with 2,4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face. supplying & fixing in frame at site as per manufacturers instructions complete all as specified and as directed. |
| 49 | S & F 100mm size stainless steel butt hinges, medium weight, cold rolled fixed with stainless steel screw with frame complete all as specified and as directed. |
| 50 | S & F Extruded aluminium alloy handles, fabricated type, anodised 125mm long complete all as specified and as directed. |
| 51 | M & L for 100mm size Mortice latch with two levers (vertical type) brass body complete all as specified and as directed. |
| 52 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 53 | M & L for glazed ceramic coloured joint free tiles in vertical surfaces, 350 x 250 x 7mm or 450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement including cement screed 10mm thick in CM 1:3 complete all as specified and as directed. |
| 54 | Complete removal of existing treatment on walls and applying two coats of exterior weather proof paint over a coat of weather proof primer to all external wall surfaces complete all as specified and as directed. |
| 55 | M & L Non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 56 | M & L Vitrified ceramic coloured tiles 10mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 57 | All as per item No.58 above but in vertical surfaces as in skirtings including screed bed 10mm thick in CM 1:3 complete all as specified and as directed. |
| 58 | M & L for 20mm thick cement mortar 1:4 as in skirting and finishing surface even and smooth complete all as specified and as directed. |
| 59 | M & L for 50mm thick PCC 1:2:4 using 20mm graded aggregate as in flooring and finishing with even and smooth without using extra cement complete all as specified and as directed. |
| 60 | S & F Framed work such as grills, gratings etc., with ends of bar shouldered forged into spikes framed guard bars and similar work conforming to fe-290 gde E-165 |
| 61 | S & F Figured glass, pin head type 4mm thick, and glazing with oil putty in square n.exc 0.5 sqm in each pane and fixed to aluminium frame using rubber packing complete all as specified and as directed. |
| 62 | M & L RCC nominal mix 1:2:4 type B-1 using 20mm graded aggregate as in slabs supported on walls, beams etc., complete all as specified and as directed. |
| 63 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work including sides of slab, n exc 200mm thick (Horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified and as directed. |
| 64 | All as per item No.6 here in before but 6mm to 8mm dia complete all as specified and as directed. |
| 65 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring etc., in brick walls and making good, cutting exc 10cm but n.exc 20cm girth complete all as specified and as directed. |
| 66 | S & F Vitreous china wash down water closet (pedestal pattern), white, of style and pattern as existing, complete with and including providing plastic seat cover, white fixed complete all as specified and as directed. |
| 67 | S & F in repairs vitreous china wall mounted wash down water closet (pedestal pattern), white, of style and pattern complete with and including in-built flushing cistern, seat cover, white fixed complete all as specified and as directed. |
| 68 | S & F Chromium plated health faucet with CP connection and hook fixed complete all as specified and as directed.Make: - Parryware Cat no: T9937A1 or equivalent. |
| 69 | S & F PVC valveless syphonic action type, flushing cistern, low level, white, 10 ltrs, with inlet ball valve, float, handle and flush pipe including. brackets including 32mm dia flush pipe complete all as specified and as directed. |
| 70 | S & F Vitreous China wash basin, white, oval shape counter top size 550 x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting or fixing of supply and waste pipe complete all as specified and as directed. |
| 71 | S & F brass chromium plated 32mm bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed. |
| 72 | S & F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 73 | S & F low density 32mm dia bore polythene waste pipe (LDPE) of pressure rating 6 Kgf/ Cm2 complete all as specified and as directed. |
| 74 | S & F Pillar taps swan neck 15mm bore cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed. |
| 75 | S & F in repairs Bib taps 15mm bore cast copper alloy with crutch or butter fly handle chromium plated screwed down for iron pipe or for brass ferrule fixed complete all as specified and as directed. |
| 76 | S & F in repairs 450 x 600mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers fixing complete all as specified and as directed. |
| 77 | S & F in repair stop valves15mm bore chromium plated with long shank and cup (Concealed type) high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 78 | S & F Brass chromium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 79 | S & F 5mm thick Glass shelves for bath room corner set of three (10\\",8\\",6\\") complete all as specified and as directed. |
| 80 | M & L toilet paper holder brass chromium plated as in repair complete all as specified and as directed.Make: - Jaquar continental Cat No. ACN-1151N or equivalent. |
| 81 | S & F stainless steel peg set of 5 complete all as specified and as directed. |
| 82 | Demolition and breaking up drain pipes any type set in cement mortar complete all as specified and as directed. |
| 83 | S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in floor, 75mm bore complete all as specified and as directed. |
| 84 | S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed to walls, 75mm bore complete all as specified and as directed. |
| 85 | S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in floors, 110mm bore complete all as specified and as directed. |
| 86 | S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed to walls, 110mm bore complete all as specified and as directed. |
| 87 | S & F PVC (SWR) bend 110mm bore complete all as specified and as directed. |
| 88 | S & F PVC (SWR) floor trap with grating including jointing to solvent cement waste pipe 75mm dia complete all as specified and as directed. |
| 89 | S & F PVC (SWR) Gully trap 125/ 110mm setting and jointing with solvent cement complete all as specified and as directed. |
| 90 | S & F PVC (SWR) vent cowl 110mm complete all as specified and as directed. |
| 91 | S & F PVC (SWR) junction single, (Single T) equal or unequal for 110mm bore pipe with access door complete all as specified and as directed. |
| 92 | S & F PVC (SWR) junction single, (Single T) equal or unequal for 75mm bore pipe with access door complete all as specified and as directed. |
| 93 | S & F PVC (SWR) bend 75mm bore complete all as specified and as directed. |
| 94 | S & F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof Bore of pipe 110mm complete all as specified and as directed. |
| 95 | Taking up or taking down steel/iron tube of 20mm bore and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 96 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in walls/ floors complete all as specified and as directed. |
| 97 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 98 | M & L for Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement on ceiling surfaces complete all as specified and as directed. |
| 99 | Supply only integral water proofing compound complete all as specified and as directed. |
| 100 | Complete removal of existing treatment on walls and applying two coats of oil bound distemper over a coat of primer over 3mm thick wall care putty to internal wall surfaces complete all as specified and as directed. |
| 101 | Preparing new plastered wall surfaces and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 102 | Preparation of old decorated ceiling surfaces including necessary scaffolding and applying one coats of white wash including filling the cracks/ depressions using chalk whitening wherever required complete all as specified and as directed. |
| 103 | Preparing new plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed. |
| 104 | M & L for preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 105 | M & L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 106 | M & L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection & paving finished even and smooth without using extra cement complete all as specified and as directed. |
| 107 | M & L Chequered cement concrete tiles with white cement and pigment 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry over 15mm thick CM 1:4 screed bed in floors complete all as specified and as directed. Please Enable Macros to View BoQ information |
