|
| 1 | PART -A Ordinary Repair to E.I in Que Complex (1st Floor) of Baba Baidhnath Mandir, Deoghar. |
| 2 | Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, with modular switch, modular plate suitable GI box etc as required. |
| 3 | a) Group - C(fan point in entry point & in stair) |
| 4 | Wiring for circuit submain wiring along with earth wire with the following size PVC insulated copper conductor , single core cable in surface / recessed PVC conduit etc as reqd . |
| 5 | a) 2x1.5 sq mm + 2x1.5 sq mm Earth Wire (32nos heavy duty exhaust fan wiring in 6 nos hall - 320mtr & point wiring repair) |
| 6 | b) 2x2.5 sq mm + 1x2.5 sq mm Earth Wire (heavy duty exhaust fan Submain ) |
| 7 | c) 2x4.0 sq mm + 1x4.0 sq mm Earth Wire (Power Socket wiring in Exit Hall way to Footoverbridge) |
| 8 | d) 1x1.5 sq, mm. (8 nos water cooler body earthing) |
| 9 | Supplying and fixing suitable GI box with modular plac and cover in front on surface of in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch. connection, painting etc. as required (For light plugs to be used in non residential buildings. |
| 10 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 11 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 12 | a) 2 way, single door |
| 13 | b) 8 way, Double door |
| 14 | S/F 40 amp DP MCB |
| 15 | S/F 40 amp TPN MCB |
| 16 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, “B”/C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required. |
| 17 | supplying and fixing 15/18 watt Round/square surface lightmake- Phillips, Havells , polycab , Crompton , Bajaj, jaquar |
| 18 | S/F 2.5 MFD condenser for ceiling fan |
| 19 | Supplying and fixing 48\\" (1200mm) Ceiling fan make - havells , polycab , Bajaj, Crompton |
| 20 | Re Installation, testing and commissinoning of ceiling fan, including wiring the down rods of standard length (upto 30 cm.) with 1.5 sq mm FR PVC insulated, copper conductor single core cable etc as reqd. |
| 21 | Supplying and fixing metal body wall fan for single phase 220 Volt make - havells , polycab , Bajaj, Crompton, Polar |
| 22 | S/F12 inch Exhasust fan (for bathroom)Make - Havells, Crompton, Polycab, Pollar or equivalent |
| 23 | S/F 450 mm 1400 rpm Turbo force heavy duty exhaust fan metal bodyMake - Havells, Crompton, Polycab, Pollar or equivalent |
| 24 | Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required. |
| 25 | Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required. |
| 26 | PART - B Provision of metal body heavy duty wall fan in Que Complex Corridor (1st Floor) of Baba Baidhnath Mandir, Deoghar. |
| 27 | Wiring for circuit submain wiring along with earth wire with the following size PVC insulated copper conductor , single core cable in surface / recessed PVC conduit etc as reqd . |
| 28 | a) 2x1.5 sq mm + 2x1.5 sq mm Earth Wire (for 36 nos turbo force wall fan wiring) |
| 29 | b) 2x6.0 sq mm + 1x6.0 sq mm Earth Wire ( wall fan Submain) |
| 30 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 31 | a) 2 way, single door |
| 32 | b) 4 way, Double door |
| 33 | c) 8 way, Double door |
| 34 | d) 12 way, Double door |
| 35 | e) 6 way, Double door |
| 36 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, “B”/C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required. |
| 37 | Supplying and laying of XLPE insulated PVC sheathed aluminium armoured cable working voltage upto 1100 volts as per IS: 7098 (Part I) of following sizes. |
| 38 | a) 35 sq,mm. 3.5 core (Form main Panel to 2 nos sub panel) |
| 39 | b) 50 sq, mm. 3.5 core (From Transformer to main Panel) |
| 40 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as reqd. Upto 35 sq. mm, (Clamped with 1 mm thick saddle) |
| 41 | Laying of one number PVC insulated and PVC sheathed / XLPE Power cable of 1.1 KV Grade of size exceeding 35 sq mm but not exceeding 95 sq mm direct in ground including excavation excluding sand cushioning, protective covering and refilling the trench etc as reqd. |
| 42 | S/F 600 mm Turbo force heavy duty wall fan metal bodyMake - Havells, Crompton, Polycab, Pollar or equivalent |
| 43 | S/F 450 mm 1400 rpm Turbo force heavy duty exhaust fan metal bodyMake - Havells, Crompton, Polycab, Pollar or equivalent |
| 44 | Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required. |
| 45 | Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required. |
| 46 | Fabrication and installation of wall mounted cubical panel with following accessories made of 16 SWG M.S sheet painted with one coat steel primer and two coat power spray painting with approved shade including fitting / fixing / connection & transportation up to work site , labour charge etc all complete.( Main Panel at Ground Floor) |
| 47 | 100 amps, MCCB 10 KA fixed thermal setting = 1 Nos. (incomer) |
| 48 | 63 amps 4 pole changeover - 1 nos |
| 49 | 63 amps, MCCB 10 KA fixed thermal setting = 1 Nos.(outgoing) |
| 50 | 63 amp DP MCB = 2 nos |
| 51 | 63 amp TPN MCB = 2 nos |
| 52 | Digital Volt Mtr. (0-500Volt)- 3 phase class 0.5 = 1 |
| 53 | Digital AMP Mtr. (0-500AMP)- 3 phase class 0.5 = 1 |
| 54 | C.T. Coil of C.T. Ratio 300/5 = 3 |
| 55 | LED Indecator lam R/Y/B/G = 3 Nos. |
| 56 | 40mm x 5mm copper strips (1.75 kg/mtr) = 20 Kg |
| 57 | Fabrication and installation of wall mounted cubical panel with following accessories made of 16 SWG M.S sheet painted with one coat steel primer and two coat power spray painting with approved shade including fitting / fixing / connection & transportation up to work site , labour charge etc all complete.( Sub Panel at 1st Floor) |
| 58 | 63 amps, MCCB 10 KA fixed thermal setting = 1 Nos.(incomer) |
| 59 | 63 amp DP MCB = 4 nos |
| 60 | Digital Volt Mtr. (0-500Volt)- 3 phase class 0.5 = 1 |
| 61 | Digital AMP Mtr. (0-500AMP)- 3 phase class 0.5 = 1 |
| 62 | C.T. Coil of C.T. Ratio 300/5 = 3 |
| 63 | LED Indecator lam R/Y/B/G = 3 Nos. |
| 64 | 40mm x 5mm copper strips (1.75 kg/mtr) = 16 Kg |
| 65 | CGST@9% |
| 66 | CGST@9% |
| 67 | Add Labour Cess@1% Please Enable Macros to View BoQ information |
