Tender For The Quotation Is Invited To Ascertain And Assess The Rate Of Materials As Per With Lowest Market Rate For Framing Of Schedule Of Rate., Chaibasa-Jharkhand

TDR : 55980064

Tender Notice
BOQ

3 Days Left

Chaibasa , Jharkhand

Tender Brief : Tender For The Quotation Is Invited To Ascertain And Assess The Rate Of Materials As Per With Lowest Market Rate For Framing Of Schedule Of Rate.

Document Fees
Refer document

EMD
Refer document

Tender Value
Refer document

Submission Date
22-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Stone Boulder of size 150 mm and below at Source Quarry
2	Supply of quarried Stone 150-200 mm size for Hand Broken at source Quarry
3	Boulder with minimum size of 300 mm for Pitching at source Quarry
4	Coarse sand i) at source
5	Coarse sand ii) at Source
6	Fine sand at Source Quarry
7	Moorum at Source Quarry
8	Gravel/Quarry spall at Source Quarry
9	Granular Material or hard murum for GSB works at source Quarry
10	Fly ash conforming to IS:3812 (Part II & I) at HMP Plant/Batching Plant/Crushing Plant
11	Filter media/Filter Material as per Table 300-3 (MoRT&H Specification) at Crusher.
12	Close graded Granular sub-base Material 53 mm to 9.5 mm/4.75mm at Crusher.
13	Close graded Granular sub-base Material 37.5 mm to 9.5 mm at Crusher.
14	Close graded Granular sub-base Material 26.5 mm to 9.5 mm at Crusher.
15	Close graded Granular sub-base Material 9.5 mm to 4.75 mm at Crusher.
16	Close graded Granular sub-base Material 9.5 mm to 2.36mm at Crusher.
17	Close graded Granular sub-base Material 4.75mm to 2.36mm At Crusher.
18	Close graded Granular sub-base Material 4.75mm to 75 micron at Crusher.
19	Close graded Granular sub-base Material 2.36 mm & below at Crusher.
20	Stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at Crusher.
21	Coarse graded Granular sub-base Material 2.36 mm & below At Crusher.
22	Coarse graded Granular sub-base Material 4.75 mm to 75 micron at Crusher.
23	Coarse graded Granular sub-base Material 4.75mm to 2.36 mm at Crusher.
24	Coarse graded Granular sub-base Material 9.5mm to 4.75 mm at Crusher.
25	Coarse graded Granular sub-base Material 26.5mm to 4.75 mm at Crusher.
26	Coarse graded Granular sub-base Material 26.5 mm to 9.5 mm at Crusher.
27	Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm at Crusher.
28	Coarse graded Granular sub-base Material 53 mm to 26.5 mm at Crusher.
29	Aggregates below 5.6 mm at Crusher.
30	Aggregates 22.4 mm to 2.36 mm at Crusher.
31	Aggregates 22.4 mm to 5.6 mm at Crusher.
32	Aggregates 45 mm to 2.8 mm at Crusher.
33	Aggregates 45 mm to 22.4 mm at Crusher.
34	Aggregates 53 mm to 2.8 mm at Crusher.
35	Aggregates 53 mm to 22.4 mm(Grade III) at Crusher.
36	Aggregates 63 mm to 2.8 mm at Crusher.
37	Aggregates 63 mm to 45 mm (Grade II)at Crusher.
38	Aggregates 90 mm to 45mm(Grade I) at Crusher.
39	Aggregates 10 mm to 5 mm at Crusher.
40	Aggregates 11.2 mm to 0.09 mm (Key aggregate Type B) at Crusher.
41	Aggregates 13.2 mm to 0.09 mm (Key aggregate Type A) at Crusher.
42	Aggregates 13.2 mm to 5.6 mm at Crusher.
43	Aggregates 13.2 mm to 10 mm at Crusher.
44	Aggregates 20 mm to 10 mm at Crusher.
45	Aggregates 25 mm to10 mm at Crusher.
46	Aggregates 19 mm to 6 mm at Crusher.
47	Aggregates 37.5 mm to 19 mm at Crusher.
48	Aggregates 37.5 mm to 25 mm at Crusher.
49	Aggregates 6 mm nominal size at Crusher.
50	Aggregates 10 mm nominal size at Crusher plant.
51	Aggregates 13.2/12.5 mm nominal size at Crusher plant.
52	Aggregates 20 mm nominal size at Crusher plant.
53	Aggregates 25 mm nominal size at Crusher.
54	Aggregates 40 mm nominal size at Crusher.
55	Crushing of Stone aggregates (GSB Crusher Run)
56	AC pipe 100 mm dia
57	Acrylic polymer bonding coat
58	Alluminium Paint
59	Aluminium alloy plate 2mm Thick
60	Aluminium alloy/galvanised steel
61	Aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable Class-B Type IV
62	Road Aluminium Stud with Micro Prismatic lens reflectors (with shank) 100 X 100 mm
63	Barbed wire
64	Bearing (Cost of parts)
65	Bearing (Cast steel rocker bearing assembly of 250 tonne )
66	Road studs 100x100mm fitted with lense reflectors vide clause cl 804.2 of MoRTH (5th Revision)
67	Bearing (Elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation)
68	Taking elastomeric bearing of size 500 X 400 X 96mm, Overall volume=19200 cubic cm
69	Bearing (Forged steel roller bearing of 250 tonne)
70	Bearing (Pot type bearing assembly consisting of a metal piston supported by a disc, PTFE pads providing sliding surfaces against stainless steel mating together with cast steel assemblies/ fabricated structural steel assemblies duly painted with all components output=250 tonne)
71	(a) Fixed POT-PTFE Bearing
72	(b) Free POT-PTFE Bearing
73	(c) Guide Slide (L) POT-PTFE Bearing
74	(d) Guide Slide (T) POT-PTFE Bearing
75	Bearing (PTFE sliding plate bearing assembly of 80 tonnes )
76	Bearing (Supply of sliding plate bearing of 80 tonne)
77	Bentonite
78	Binding wire
79	bitumen ( Cationic Emulsion ) Ex- Bokaro (R.S 1) Packed
80	bitumen (VG-30 Grade) Ex- Bokaro Packed
81	bitumen (VG-40 Grade) Ex- Bokaro Packed
82	bitumen (VG-10 Grade) Ex- Bokaro Packed
83	bitumen (Cutback ) Packed Ex- Bokaro .
84	bitumen (Emulsion ) Ex- Bokaro (S.S1 complying IS8887) Packed
85	bitumen (modified graded) Ex - Haldia (CRMB - 55) Bulk
86	Brick - 75A
87	C.I. shoes for the pile
88	Cement i) Ordinary Portland Cement (OPC) - 43 Grade
89	Cement ii) Portland Pozzolana Cement (PPC)
90	Cementiii) Sulphate Resisting Portland Cement (SRC)
91	Cement iv) Portland Slag Cement (PSC)
92	CGI Sheet 0.8 mm thick
93	Cold twisted bars (HYSD Bars) - Fe 500 D Av. of M-10A
94	Coller (RCC) for joints 300 mm dia
95	Compressible Fibre Board (20mm thick)
96	Connectors / Staples
97	Copper Plate (12m long x 250mm wide)
98	Corrosion resistant Structural steel
99	Corrugated sheet, 3 mm thick, \\"Thrie\\" beam section railing
100	Credit for excavated rock found suitable for use
101	Curing compound
102	Delineators from ISI certified firm as per the standard drawing given in IRC - 79
103	Earth Cost or compensation for earth taken from private land
104	Elastomeric slab seal expansion joint assembly manufactured by using chloroprene, elastomer for elastomeric slab unit conforming to clause 915.1 of IRC: 83 (part II)
105	Epoxy compound with accessories for preparing epoxy mortar
106	Epoxy mortar
107	Epoxy primer
108	Epoxy resin-hardner mix for prime coat
109	Flag of red color cloth 600 x 600 mm
110	Flowering Plants
111	Galvanised MS flat clamp
112	Galvanised steel wire crates of mesh size 100 mm x 100 mm woven with 4mm dia. GI wire in rolls of required size.
113	Galvanised structural steel plate 200 mm wide, 6 mm thick, 24 m long
114	Geo grids
115	Geomembrane
116	Geonets
117	Geotextile
118	Geotextile filter fabric
119	GI bolt 10 mm Dia
120	Spherical Dome Nut
121	Grass (Doob)
122	Grass (Fine)
123	HDPE pipes 75mm dia
124	HDPE pipes 90mm dia
125	Hedge plants
126	Helical pipes 600mm diameter
127	Hot applied thermoplastic compound (Sp. Gravity - 2.10)
128	HTS strand
129	Joint Sealant Compound
130	Jute netting, open weave, 2.5 cm square opening for seeding and Mulching
131	LDO for steam curing
132	M.S. Clamps
133	M.S. Clamps
134	M.S.shoes @ 35 Kg per pile of 15 m
135	Mild Steel bars (Av-M6)
136	Modular strip/box seal expansion joint including anchorage catering to a horizontal movement beyond 70 mm and upto 140mm assembly comprising of edge beams, central beam, 2 modules chloroprene seal, anchorage elements, support and control system, all steel sections protected against corrosion and installed by the manufacturer or his authorised representative
137	Modular strip/box seal expansion joint catering to a horizontal movement beyond 140mm and upto 210mm box/box seal joint assembly containing 3 modules/cells and comprising of edge beams, two central beams, chloroprene seal, anchorage elements, support and control system, all steel sections protected against corrosion and installed by the manufacturer or his authorised representative
138	Nipples 12mm,300mm long
139	Nuts and bolts
140	Paint
141	Pavement Marking Paint
142	Paving Fabric
143	Perforated geosynthetic pipe 150 mm dia
144	Perforated pipe of cement concrete, internal dia 100 mm
145	Pesticide
146	Pipes 200 mm dia, 2.5 m long for drainage
147	Plastic sheath, 1.25 mm thick for dowel bars
148	Plastic tubes 50 mm dia, 1.2 m high
149	Polymer braids
150	Pre moulded Joint filler, 25 mm thick for expansion joint.
151	Pre-coated stone chips of 13.2 mm nominal size
152	Preformed continuous chloroprene elastomer or closed cell foam sealing element with high tear strength, vulcanised in a single operation for the full length of a joint to ensure water tightness.
153	Pre-moulded asphalt filler board
154	Pre-packed cement based polymer concrete of strength 45 Mpa at 28 days
155	Primer (Wall)
156	Quick setting compound
157	Random Rubble Stone
158	RCC Pipe NP 4 heavy duty non presure pipe 1000 mm dia with spigot
159	RCC Pipe NP 4 heavy duty non presure pipe 1200 mm dia with spigot
160	RCC Pipe NP 4 heavy duty non presure pipe 900 mm dia with spigot
161	RCC Pipe NP 4 heavy duty non presure pipe 600 mm dia with spigot
162	RCC Pipe NP 4 heavy duty non presure pipe 300 mm dia
163	Reflectorising glass beads
164	Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Copper Strips)
165	Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Galvanised carbon steel strips)
166	Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Glass reinforced polymer/fibre reinforced polymer/polymeric strips)
167	Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Stainless steel strips)
168	Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Aluminium strips)
169	Rivets
170	Sand bags (Cost of sand and Empty cement bag)
171	Sapling 2 m high 25 mm dia
172	Scrap tyres of size 900 x 20
173	Seeds
174	Selected earth (Including royalty & compensation per cum)
175	Separation Membrane of impermeable plastic sheeting 125 micron thick
176	Sheathing duct
177	Shrubs
178	Sludge / Farm yard manure @ 0.18 cum per 100 sqm at site of work for turfing
179	Sodium vapour lamp (70 watt)
180	Square Rubble Coursed Stone
181	Steel circular hollow pole of standard specification for street lighting to mount light at 5 m height above deck level
182	Steel circular hollow pole of standard specification for street lighting to mount light at 9 m height above road level
183	Steel drum 300 mm dia 1.2 m high/empty bitumen drum
184	Steel helmet and cushion block on top of pile head during driving.
185	Steel pipe 25 mm external dia as per IS:1239
186	Steel pipe 50 mm external dia as per IS:1239
187	Steel pipe 100 mm external dia as per IS:1239
188	Steel wire rope 20 mm
189	Steel wire rope 40 mm
190	Strip seal expansion joint
191	Structural Steel (Av. of M6, M8 & M9)
192	Super plastisizer admixture IS marked as per 9103-1999
193	Synthetic Geogrids as per clause 3102.8 and approved design and specifications.
194	Through and bond stone
195	Tie rods 20mm diameter (500mm length) @2.47 kg/m
196	Tiles size 300 x 300 mm and 25 mm thick
197	Timber
198	Traffic cones with 150 mm reflective sleeve
199	Tube anchorage set complete with bearing plate, permanent wedges etc
200	Unslaked lime
201	Water based cement paint
202	Welded steel wire fabric
203	Wire mesh 50mm x 50mm size of 3mm wire
204	Wooden ballies 2\\" Dia for bracing (Sal)
205	Wooden ballies 8\\" Dia and 9 m long
206	Water
207	Wooden packing
208	Wooden staff for fastening of flag 25 mm dia, 1.0 m long
209	Silica fume
210	Synthetic Geogrids Ultimate tensile Strength 100kN/Metre.
211	Synthetic Geogrids Ultimate tensile Strength 150kN/Metre.
212	Synthetic Geogrids Ultimate tensile Strength 200kN/Metre.
213	Synthetic Geogrids Ultimate tensile Strength 250kN/Metre.
214	Synthetic Geogrids Ultimate tensile Strength 300kN/Metre.
215	Synthetic Geogrids Ultimate tensile Strength 350kN/Metre.
216	Synthetic Geogrids Ultimate tensile Strength 400kN/Metre.
217	Synthetic Geogrids Ultimate tensile Strength 500kN/Metre.
218	Synthetic Geogrids Ultimate tensile Strength 600kN/Metre.
219	Synthetic Geogrids Ultimate tensile Strength 700kN/Metre.
220	Synthetic Geogrids Ultimate tensile Strength 800kN/Metre.
221	Synthetic Geogrids Ultimate tensile Strength 900kN/Metre.
222	Synthetic Geogrids Ultimate tensile Strength 1000kN/Metre.
223	Synthetic Geogrids Ultimate tensile Strength 1100kN/Metre.
224	Synthetic Geogrids Ultimate tensile Strength 1200kN/Metre.
225	Explosive for blasting(Gelatine80%)
226	Delay Detonators
227	Electric Detonators @1 detonator for 1/2 gelatin stick of 125 gms each
228	Detonation Fuse coil
229	3.7m long extension rod boom Hydraulic Drill jumbo
230	32 mm coupling sleeve boom Hydraulic Drill jumbo
231	Difter rod boom Hydraulic Drill jumbo
232	R32 sank adapter boom Hydraulic Drill jumbo
233	45 mm Dia Button Bit boom Hydraulic Drill jumbo
234	51 mm Dia Button Bit Hydraulic Drill Jumbo
235	Steel Fiber
236	Microsilica
237	Accelerator
238	Wire mesh
239	Bamboos (i) 75mm Dia 6m to 8m long (ii) 100mm Dia 6m to 8m long (iii) 50mm Dia Hill Bamboo
240	Live Stake Stump
241	Hard wood sticks
242	Live Sods(0.6m Length)
243	Live Sods(2.0 m Length)
244	Coal Tar Epoxy
245	Binding Material
246	Spring post 700mm
247	Spring post 450 mm
248	Water Filled Barricades Work zone sheeting (Trapezoidal Shape 800mm to 1000mm in length, 700mm in height
249	GI Pipe 100 mm Dia
250	Bracket for G.I Pipe fixing
251	Flange for G.I Pipe fixing
252	Neem Cake
253	Supplying sludge
254	Contol Center Server
255	Hot Standby Backup Server
256	NAS Video Server with storage Minimum 70 TB
257	Backup Video (Only Incidents) Server.
258	Graphic Display(70'' LED DLP IN 3X2 matrix)
259	Graphic Display Controller and software including Video Switches
260	CCTV Monitoring Workstation
261	Emergengy Telephone (1033)Console.
262	VIDS-Workstation.
263	Administrative Workstation
264	ATMS Operator Workstation
265	CCTV joystick
266	Operations Laser Printer(Colour)
267	Operations Laser Printer(Black)
268	Rack 19''
269	ATMS Control Room Software(integrated with VIDS,ATCC,VMS,MOS)
270	Video Management Software with atleast 150 VMS Lic
271	Facility Monitoring System Controller Software
272	Server & Database license
273	Antivirus license
274	PTZ Camera (including CCTV Controller)
275	Solar System with UPS, battery & 12mm Pole & Cabinet
276	VIDS Camera (including image Prossesing unit)
277	Warning amber lights with hooters, 72 Hrs solar backup,5m poles and foundation
278	Cabinet
279	12 m Pole (including manufacturing and galvanizing)
280	Solar System with UPS & batteries
281	Equipment,Sensor unit, Processing unit, Solar power supply and civil works for 4 Lanes
282	Solar System with UPS , batteries.
283	VMS (Variable Message Sine-Mtype)
284	Gantry(including Manufacturing and galvanizing)
285	Solar System with UPS, battery and Cabinet for M type VMS
286	Uninterruptible Power supply (UPS)for Server Rack(10KVA)
287	Uninterruptible Power supply (UPS) for TMC (30KVA)
288	Power Distribution Board (Essential & Critical Supply)
289	MOS sensor Equipment (including MOS Controller)
290	Cabinet
291	Steel fence for protection
292	24 Core Armoured OFC + all accessories
293	40 mm PLB HDPE duct as per latest TSEC specification + all accessories
294	Trenching of 1.8 meters, Laying & Back filling for PLB HDPE duct
295	Bi- Axial Extruded Geogrids of Minimum Tensile Strengh 15kN/m
296	Bi- Axial Extruded Geogrids of Minimum Tensile Strengh 20kN/m
297	Bi- Axial Extruded Geogrids of Minimum Tensile Strengh 30kN/m
298	Bi- Axial Extruded Geogrids of Minimum Tensile Strengh 40kN/m
299	Geosynthetic Drainage with two filtering nonwoven geotextileshaving a “W” configuration as longitudinal parallel channels. Minimumthickness to be 7.2 mm, with two filtering UV stabilized polypropylenenonwoven geotextile of minimum thickness of 0.75 mm having poresof 150 micron and tensile strength of 8.0 kN/m and having planeflow capacity of 2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kPapressure,tensile strength of 18 kN/m , with mass per unit area of 740gsm.
300	Geosynthetic Drainage Composite having thermobonding a drainingcore - HDPE geonet comprises of two sets of parallel overlayed ribsintegrally connected to have a rhomboidal shape with a polyethylenefilm and a nonwoven geotextile having mass per unit area 130 g/m2and tensile strength of 8.0 kN/m having in plane flow capacity of 0.7L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensilestrength of 13.5 kN/m , with mass per unit area of 830 gsm,
301	Waste Plastic (as per IRC:SP:98-2013)
302	RCC Pipe NP 4 heavy duty non presure pipe 1500 mm dia
303	Acrylic noise barrier sheet
304	Silt Fence Sheet
305	Fully Threaded Hot Dip galvanised geotechnical bars with casing
306	Centralizer
307	Bearing Plate 200mm x 200mm x 10mm
308	Spherical dome nut
309	Fibre Reinforcement
310	Geotextile
311	Polyvinyl Chloride Pipe (PVC)-90 mm
312	Polyvinyl Chloride Pipe (PVC)-110 mm
313	Polyvinyl Chloride Pipe (PVC)-135 mm
314	Steel/Iron Scraps
315	Aluminium sheeting fixed with encapsulated lens type reflective sheeting including 2% towards lettering (Class-C Type XI- 2mm thick)
316	Geocell
317	Geosynthetics mat
318	Natural geotextile
319	Fabric Form mattress
320	Non-Woven Geotextile
321	Sr. Road Safety/Auditor/ Team Leader for Road Safety Audit
322	Traffic Planner for Road Safety Audit
323	Boarding & Loading and Per Diem for Site Visits (During Road Safety Audit)
324	Transportation at site and Head Office (During Road Safety Audit)
325	Duty travel to Site (During Road Safety Audit)
326	Collection of Road accident data and analysis of fatal and grievously injured accident with black spot identification (During Road Safety Audit)
327	Submission of GAP report (For Road Safety Audit)
328	Road Safety Audit Reports on all activities which were planned, actually executed and planned for the next quarter.
329	Submission of Audit Report of work zone safety (for Road Safety Audit)
330	Workshop Report for Road Safety Audit
331	Final Safety Report (for road safety Audit)
332	Cement Fly Ash Brick (Conforming to IS 12894, size= 230 X 110 X 70 mm, weight of one brick= 3Kg, composition: Fly ash= 60%, Coarse sand= 30%, Cement= 10%) including carriage of sand
333	Paver Block (Excluding GST )(i) M -35 Grade and 60 mm thickness (a) White
334	Paver Block (Excluding GST )(i) M -35 Grade and 60 mm thickness (b) Red
335	Paver Block (Excluding GST )(i) M -35 Grade and 60 mm thickness (C) Yellow
336	Paver Block (Excluding GST )(ii) M-40 Grade and 80mm thickness (a) White
337	Paver Block (Excluding GST )(ii) M-40 Grade and 80mm thickness (b) Red
338	Paver Block (Excluding GST )(ii) M-40 Grade and 80mm thickness (C) Yellow
339	Kerb-Stone Block- M30 Grade (Size 375mm x 300mm x150mm )
340	Autoclaved Aerated Concrete (AAC) Block
341	Construction of restaurant, workshop, first aid room, shop etc. in truck parking area complete as per drg. and direction of the Engineer.
342	Providing Telephone booth complete as per specifications and direction of Engineer.
343	Providing & fixing tube well, complete as per drawing and additional specifictions.
344	Providing a Drinking Water Kiosk complete as per drawing & specification.
345	Providing and fixing of litter bins in Truck lay Bye locations complete as per drawing or as directed by the engineer.
346	Construction of toilet block provided with fittings and fixtures complete in truck parking area complete as per drg. and direction of the Engineer.
347	Construction of Open lined U - Drain in truck laybye area complete as shown in drawing and technical specification clause 309.
348	Providing shelters for bus passengers as per drawing and MORT&H Specifications section 300, 1500, 1600 and 1700.
349	Providing & fixing guard railing with tubular steel sections at foot path / medians / islands etc including foundation concrete and painting with approved paint etc. all complete as per drawing & MORT&H Specifications Clauses 808, 300, 1500, 1700 & 1900.
350	Toll Booth at Tollplaza
351	Barrier gates at Tollplaza For 3.2 m wide toll lane
352	Barrier gates at Tollplaza For 4.5 m wide toll lane
353	Canopy
354	Canopy Lights Halide lamps 150 watt
355	Canopy Lights Halogen lamps 1000 watt
356	Loading Unloading Platform
357	Traffic Aid Post at Toll Plaza
358	Medical Aid Post at Toll Plaza
359	Vehicle Rescue Post at Toll Plaza
360	Ambulances at Toll Plaza
361	Cranesat Toll Plaza
362	Electronic Toll Connection (ETC lanes) at Toll Plaza
363	Intercom facility at Toll Plaza
364	Weigh Bridge
365	Car Parking area
366	Generator room
367	Base Maintainance Camp
368	Toll plaza equipment
369	Electrification And Air conditioning for toll Booth and toll Plaza
370	Bull nose crash barrier
371	Standby Generator at Toll Plaza
372	CCTV camera installed at each booth
373	T1 for Toll Road Start
374	T2 for Toll Gate 1 Km
375	T3 for Toll Gate 500 m and toll rates
376	T4 for exempt vehicles at Toll Plaza
377	T5 for pictorial description of toll rates
378	T6 for over size vehicle lane direction sign at Toll Plaza
379	T7 near the Toll booths displaying Toll Rates, exempt vehicles and complaint telephone number & address
380	T8 for Toll Road End
381	Picnic Area at Rest Area
382	Petrol Pump & Pepairing Shop at Rest Area
383	Buffer Zone at Rest Area
384	Traffic blinker Signal (L.E.D.)
385	PVC Roof Sheet at FOB
386	Cost of Water Quality Monitoring
387	Cost of Soil Quality Monitoring
388	Cost of Ambient Air Quality
389	Cost of Ambient Noise Monitoring 24 hour continuous
390	Consent to Establish (CTE)
391	Consent to Operate (CTO)
392	Compliance submission for Consent to Establish (CTE)
393	Compliance submission for Consent to Operate (CTO)
394	Cost of Environmental Workshop
395	(ii)bitumen grade VG 40 (30/40) BULK Ex HALDIA.
396	(i)bitumen (VG-30 Grade) Ex- Haldia Bulk
397	(ii)bitumen (VG-40 Grade) Ex- Haldia Bulk
398	bitumen Emulsion (M.S.) Ex- Bokaro Packed
399	Bitumen Cationic Emulsion (M.S.) Packed, Ex-Bokaro
400	2 component Cold Applied plastic with specialised cold plastic Primer coating rolled on surfacing material solvent free, high build two pack seamless, tough, skid resistant, for material to reduce speed with specialised high refractive index glass beads of minimum reflectivity index of 1.5. The glass bead shall be @ 250gm/sqm. Type 1 beads (Refer MoRTH Specification Clause803.4.2) which are a constituent of the basic cold plastics compound vide Table 800-9 (MoRTH Specification) and Type 2 beads are those which are to be sprayed on the surface vide Clause 803.6.4 (MoRTH Specification)Dry/Wet visibility and skid resistance shall be conforming to clause 15.5 of IRC 35.
401	5mm thick anti-glare screen of PPCP/HDPE material. The anti glare shall be rectangular vane of 220-230 mm wide and 600mm ht. The screen shall have minimum one yellow reflective sheeting band on both sides of sheet. The reflective band shall be 150mm ht and conforming to type XI sheeting specifications as per IRC 67
402	5mm thick antl-glare screen of PPCP/HDPE material. The anti glare shall be rectangular vane of 220-230 mm wide and 900mm ht. The screen shall have minimum one yellow reflective sheeting band on both sides of sheet. The reflective band shall be 150mm ht and conforming to type XI sheeting specifications as per IRC 67
403	10 mm thick anti-glare screen of PPCP/HDPE No. material. The anti-glare shall be rectangular vane of 300 mm wide and 650 mm ht. The screen shall have minimum one yellow reflective sheeting band on both sides of sheet. The reflective band shall be 150mm ht and conforming to type XI sheeting specifications as per IRC 67
404	Tubular markers 700 mm ht (mini.) and having minimum dia. of 75mm. Tubular Marker shall be made up of polyurethane and flexible in nature conforming to IRC SP 55 with the minimum 50mm width of 2 no. reflective bands to the approaching road users. The reflective bands shall be provided with white colour retro reflective sheeting Type XI as per IRC: 67
405	Red /Yellow unbreakable polycarbonate body Solar Blinker 300mm dia. LED lamp conforming to IRC:93 and IS:7537. It shall have Light Emitting Diode (LED) Hi Bright technology (Compliant to EN12368 or equivalent BIS standard). The Signal Switching shall be Solid State, with Opto-isolation. The Automatic operation mode shall have functional flashing rate avallable at 50% Duty Cycle 50 or 60 Flashes/minutes. The Electrical Power Supply shall be solar based 12 VDC operating at Ambient Temperature 0 to 55°C. The solar power system shall have in-built charge Controller - Low/High cut out, Solar SPY Module 60 Watts. Maintenance Free Battery (60AH) (having back up for operating blinker for 72 Hrs in absence of Sun or during rainy or foggy days. The Solar System shall be housed in a weatherproof pole mounting cabinet with clamp and mounting accessorles.
406	Cement - OPC 53 Grade confirming to IS 269 : 2015
407	Tar Felt Cusion
408	Solar Powered Road marker (Solar Stud): Supplying and installation of Solar Raised Pavement Markers made of polycarbonate moulded body with circular shape, solar powered, LED self-illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280. Its water resistance shall meet the requirements of IP 65 in accordance with IS:12063:1987 Category 2 for protection against water ingress. Colour of lighting could be provided in red or yellow (amber) or green or blue or combination as per requirement. It shall have super bright LEDs so as to provide long visibility from a distance of more than 800 m. Its flashing rate shall not be less than 1 Hz. It should be able to give the prescribed performance in the temperature range of -40°C to +55°C. Its life shall be not less than 3 years. The full charge should provide for a minimum autonomy of 50 hours operation. The height, width and length of the marker shall not be less than 10mm x 100mm x 100mm. Also the surface diameter of the marker shall not be less than 100mm respectively. The weight of marker shall not exceed 0.5 kilograms. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive.
409	Mechanically woven, metallic coated (galvanized with zinc alloy in accordance with IS 4826) steel wire conforming to IS 280, Double Twisted, Hexagonal Shaped Wire mesh of Mesh type 6X8 (D=60 mm with tolerance of ± 2%) Zinc + 10% Aluminum and coated with High Abrasion Resistant Polymer coating conforming to IS 16014:2024, Mesh wire dia 2.2/3.2 mm (ID/OD)
410	Mechanically woven, metallic coated (galvanized with zinc alloy in accordance with IS 4826) steel wire conforming to IS 280, Double Twisted, Hexagonal Shaped Wire mesh of Mesh type 8X10 (D=80 mm with tolerance of ± 2%) Zinc + 10% Aluminum and coated with High Abrasion Resistant Polymer coating conforming to IS 16014:2024, Mesh wire dia 2.7/3.7 mm (ID/OD)
411	Manufactured sand derived from Recycled Concrete Aggregate (RCA)
412	Recycled Concrete Aggregate (RCA) 20 mm nominal size
413	Recycled Concrete Aggregate (RCA) 12.5 mm nominal size
414	Recycled Concrete Aggregate (RCA) 10 mm nominal size
415	Recycled Aggregate (RA) 40 mm nominal size
416	Recycled Aggregate (RA) 20 mm nominal size
417	Recycled Aggregate (RA) 10 mm nominal size
418	Dozer - 240 HP
419	Dozer - 175 HP
420	Dozer - 90 HP
421	Motor Grader 4.3 metre blade
422	Motor Grader 3.7 metre blade
423	Motor Grader 3.35 metre blade
424	Hydraulic Excavator of 1.2 cum bucket
425	Hydraulic Excavator of 1.1 cum bucket
426	Hydraulic Excavator of 0.9 cum bucket
427	Jack Hammer (attachment of Hydraulic Excavator)
428	Front End loader 3.1 cum bucket capacity
429	Front End loader 2.1 cum bucket capacity
430	Backhoe-loader 1 cum bucket capacity
431	Tipper-18 Cum
432	Tipper-14 Cum
433	Tipper-10 Cum
434	Tipper-5.5 Cum
435	Vibratory Soil Compactor (10 tonne)
436	Smooth Wheeled Roller 8 tonne
437	Tandem Roller
438	Mini Tandem Roller
439	Pneumatic Road Roller
440	Water Tanker (16 KL)
441	Water Tanker (12 KL)
442	Water Tanker (6 KL)
443	Tractor-Trolly
444	Rotavator
445	Ripper
446	Air Compressor -250 cfm
447	Air Compressor -500 cfm
448	Integrated Stone Crusher Stone (3 Stage) 250 TPH
449	Wet Mix Plant - 250 TPH Capacity
450	Wet Mix Plant - 200 TPH Capacity
451	Wet Mix Plant - 100 TPH Capacity
452	Hotmix Plant - 200 TPH Capacity
453	Hotmix Plant - 160 TPH Capacity
454	Hotmix Plant - 120 TPH capacity
455	Batching and Mixing Plant - 240 cum Capacity
456	Batching and Mixing Plant - 120 cum Capacity
457	Mobile Concrete Batching / Mixing Plant
458	Concrete Mixer - 0.4/0.28 cum
459	Concrete Mixer - 1 cum
460	Generator 725 KVA
461	Generator 500 KVA
462	Generator 250 KVA
463	Generator 125 KVA
464	Generator 100 KVA
465	Generator 62.5 KVA
466	Generator 33 KVA
467	Generator 10 KVA
468	Mechanical Broom Hydraulic
469	Bitumen Pressure Distributor
470	Emulsion Pressure Distributor
471	Bitumen Boiler Oil Fired
472	Mastic Cooker
473	Paver Finisher Mechanical
474	Paver Finisher Hydrostatic with sensor control -240 HP
475	Paver Finisher Hydrostatic with sensor control -170 HP
476	Paver Finisher Concrete with 300 HP Motor
477	Paver Finisher Concrete with 241 HP Motor
478	Paver Finisher Concrete with 118 HP Motor
479	Texture Curing Machine (TCM) - upto 18 m
480	Texture Curing Machine (TCM) - upto 9 m
481	Hydraulic Chip Spreader
482	Pot-Hole Repair Machine
483	Transit Mixer - 6 Cum
484	Concrete Pump
485	Boom Placer
486	Kerb Casting Machine
487	Piling Rig with Bentonite Pump
488	Pneumatic Sinking Plant
489	Road marking machine
490	Mobile Slurry Seal Equipment
491	Joint Cutting Machine
492	Bar Bending & Cutting Machine
493	Needle Vibrator
494	Jack Hammer for air compressor
495	Plate Compactor
496	Milling Machine with 1 meter Drum Width
497	Milling Machine with 1.2 meter Drum Width
498	Milling Machine With 1.3 meter Drum Width
499	Milling Machine With 2 meter Drum Width
500	Cold in Situ recycling of bitumen's pavement with foam bitumen technology

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Jharkhand Tenders

Construction Tenders

Building Material Tenders

Construction Material Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For The Quotation Is Invited To Ascertain And Assess The Rate Of Materials As Per With Lowest Market Rate For Framing Of Schedule Of Rate., Chaibasa-Jharkhand

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For The Quotation Is Invited To Ascertain And Assess The Rate Of Materials As Per With Lowest Market Rate For Framing Of Schedule Of Rate., Chaibasa-Jharkhand

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us