Tender For Maintenance Works Of Distribution System At Daund Municipal Council, Daund-Maharashtra

TDR : 55979889

Tender Notice
BOQ

8 Days Left

Daund , Maharashtra

Tender Brief : Tender For Maintenance Works Of Distribution System At Daund Municipal Council

Document Fees
₹ 2000 /-

EMD
₹ 10000.0 /-

Tender Value
Refer document

Submission Date
23-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
2	Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
3	Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
4	Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bedfor foundation and excluding backfilling, etc. complete.
5	Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means.
6	Excavation for foundation / pipe trenches in slush muddy / marshy / slushy / soil including use of poclain, labour for dewatering during execution including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, preparing the bed by cleaning the mud, labour required for execution for shuttering item but excluding backfilling, etc. complete. Providing and fixing shuttering shall be paid separately.
7	Desilting the Supply Well, Intake Well / Head Works, Sump of water supply / sewerage works etc. in wet or dry condition including lifts upto 9 M and lead upto 150 M as required beyond the work site, stacking, spreading, including necessary guarding, etc. complete, as directed by Engineer-in-charge.
8	Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost ofmachinery, labour, fuel), etc. complete.
9	Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
10	Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete.
11	Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete.
12	Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete.
13	Providing structural steel work in rolled stanchions fixed with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connecting to truss members and like as per detailed designs and drawings or as directed by Engineer-in-charge including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting,etc. complete.
14	Providing structural steel work in single stanchions composed of RSJ, channel, etc. with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineerincharge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete.
15	Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. PCC M-150
16	Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)In RCC M-200
17	Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) In RCC M-250
18	Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire).Tor Steel
19	Providing and laying in situ Ready Mix Cement Concrete grade of trap / granite / quartzite / gneiss metal for RCC works in foundation like raft, grillage, strip foundation and footing of RCC column and steel stanchions including normal dewatering, form work, compaction, finishing and curing including transporting from mixing plant upto distance of 25 km., pouring the concrete at work site for 1.5 M lift above G.L. and 5.0 M lift below G.L., etc. complete.(Excluding reinforcement and structuralsteel) In RCC M-250
20	Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-incharge for following diameters of existing pipeline, irrespective of diameter of branch line. i)80 MM
21	ii) 100 mm
22	iii) 125 mm
23	iv) 150 mm
24	v) 200 mm
25	vi) 250 mm
26	vii) 300 mm
27	viii) 350 mm
28	ix) 400 mm
29	Dismantling dead pipeline of M.S./ R.C.C./ C.I./ P.S.C. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineer-in-charge with all leads and lifts including cleaning the surface, etc. complete.,i)80 mm
30	ii) 100 mm
31	iii) 125 mm
32	iv) 150 mm
33	v) 200 mm
34	vi) 250 mm
35	vii) 300 mm
36	viii) 350 mm
37	ix) 400 mm
38	Dismantling dead pipeline ofG.I./ A.C./ P.V.C./ S.W./ H.D.P.E. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineer-in-charge with all leads and lifts including cleaning the surface, etc. complete.,i)80 mm
39	ii) 100 mm
40	iii) 125 mm
41	iv) 150 mm
42	v) 200 mm
43	vi) 250 mm
44	vii) 300 mm
45	viii) 350 mm
46	ix) 400 mm
47	Pushing of M.S. pipes of following dia for road crossing and railway crossing by push through method in all types of strata by using hydraulic jack and drilling machine of required diameter of belowM.S. casing pipes, lowering, laying , jointing of material, required welding machinery, tripod, shain -pulley block crain, blower, compressor, loading and unloading of machinery into the trench, etc. transportation and dewatering, etc complete, as directed by engineer-incharge but excluding the cost of M.S.pipes a) 200 mm to 499 mm dia MS pipe
48	b) 500 mm to 1000 mm dia MS pipe
49	Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition/ revision with amendments for Rubber Gaskets i)100 mm
50	ii) 150 mm
51	iii) 200 mm
52	iv) 250 mm
53	v) 300 mm
54	vi) 350 mm
55	vii) 400 mm
56	Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete.,i)100 mm
57	ii) 150 mm
58	iii) 200 mm
59	iv) 250 mm
60	v) 300 mm
61	vi) 350 mm
62	vii) 400 mm
63	Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon,loading into truck transport to stores, unloading etc. complete as directed by Engineer-in-charge.i) 80 mm
64	ii) 100 mm
65	iii) 125 mm
66	iv) 150 mm
67	v) 200 mm
68	vi) 250 mm
69	vii) 300 mm
70	viii) 350 mm
71	ix) 400 mm
72	Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.MS barrels (pipe pieces) locally manufactured (for small quantities)
73	Erecting and hoisting in position and jointing, testing M.S./ C.I. D/F pipes and specials in vertical position including cost of all jointing materials (rubber packing, nut bolts, etc.) labour, scaffolding, hydraulic testing etc. complete.i) 80 mm
74	ii) 100 mm
75	iii) 125 mm
76	iv) 150 mm
77	v) 200 mm
78	vi) 250 mm
79	vii) 300 mm
80	viii) 350 mm
81	ix) 400 mm
82	Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523.For all types of specials, bends tees etc. a)80 to 300 mm dia.
83	b) 350 mm & above dia.
84	Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent).Working Pressure 4 Kg./Sq.cm Dia i) 63mm
85	ii) 75 mm.
86	iii) 90 mm.
87	iv) 110 mm.
88	v) 140 mm
89	vi) 160 mm
90	Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent).Working Pressure 6 Kg./Sq.cm Dia i) 63mm
91	ii) 75 mm.
92	iii) 90 mm.
93	iv) 110 mm.
94	v) 140 mm
95	vi) 160 mm
96	Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint).4/6 Kg./Sq.cm Dia i) 63mm
97	ii) 75 mm.
98	iii) 90 mm.
99	iv) 110 mm.
100	v) 140 mm
101	vi) 160 mm
102	Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe Class MEDIUM dia i) 15 mm.
103	ii) 20 mm.
104	iii) 25 mm.
105	iv) 32 mm.
106	v) 40 mm.
107	vi) 50 mm.
108	vii) 65 mm.
109	viii) 80 mm.
110	ix) 100 mm.
111	xx) 125 mm
112	xxi) 150 mm.
113	Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour,etc. complete either underground or in vertical position, as directed by Engineer-in-charge. Class MEDIUM dia i) 15 mm.
114	ii) 20 mm.
115	iii) 25 mm.
116	iv) 32 mm.
117	v) 40 mm.
118	vi) 50 mm.
119	vii) 65 mm.
120	viii) 80 mm.
121	ix) 100 mm.
122	xx) 125 mm
123	xxi) 150 mm.
124	Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.Double socket bend 90 degree i)80 mm dia
125	ii)100 mm dia
126	iii)150 mm dia
127	iv)200 mm dia
128	v)250 mm dia
129	vi)300 mm dia
130	vii)350 mm dia
131	viii)400 mm dia
132	Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.Double socket bend 45 degree i)80 mm dia
133	ii)100 mm dia
134	iii)150 mm dia
135	iv)200 mm dia
136	v)250 mm dia
137	vi)300 mm dia
138	vii)350 mm dia
139	viii)400 mm dia
140	Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.Double socket bend 22.5 degree i)80 mm dia
141	ii)100 mm dia
142	iii)150 mm dia
143	iv)200 mm dia
144	v)250 mm dia
145	vi)300 mm dia
146	vii)350 mm dia
147	viii)400 mm dia
148	Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.Double socket bend 11.25 degree i)80 mm dia
149	ii)100 mm dia
150	iii)150 mm dia
151	iv)200 mm dia
152	v)250 mm dia
153	vi)300 mm dia
154	vii)350 mm dia
155	viii)400 mm dia
156	Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.Double socket concentric reducer i)100 x 80 mm dia
157	ii)150 x 80 mm dia
158	iii)150 x 100 mm dia
159	iv)200 x 80 mm dia
160	v)200 x 100 mm dia
161	vi)200 x 150 mm dia
162	vii)250 x 80 mm dia
163	viii)250 x 100 mm dia
164	ix)250 x 150 mm dia
165	x)250 x 200 mm dia
166	xi)300 x 100 mm dia
167	xii)300 x 150 mm dia
168	xiii)300 x 200 mm dia
169	xiv)300 x 250 mm dia
170	xv)350 x 200 mm dia
171	xvi)350 x 250 mm dia
172	xvii)350 x 300 mm dia
173	xviii)400 x 200 mm dia
174	xix)400 x 250 mm dia
175	xx)400 x 300 mm dia
176	xxi)400 x 350 mm dia
177	Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.Double socket Tee with flange branch PN-10 i)80 x 80 mm dia
178	ii)100 x 80 mm dia
179	iii)100 x 100 mm dia
180	iv)150 x 80 mm dia
181	v)150 x 100 mm dia
182	vi)150 x 150 mm dia
183	vii)200 x 80 mm dia
184	viii)200 x 100 mm dia
185	ix)200 x 150 mm dia
186	x)200 x 200 mm dia
187	xi)250 x 80 mm dia
188	xii)250 x 100 mm dia
189	xiii)250 x 150 mm dia
190	xiv)250 x 200 mm dia
191	xv)250 x 250 mm dia
192	xvi)300 x 80 mm dia
193	xvii)300 x 100 mm dia
194	xviii)300 x 150 mm dia
195	xix)300 x 200 mm dia
196	xx)300 x 250 mm dia
197	xxi)300 x 300 mm dia
198	xxii)350 x 80 mm dia
199	xxiii)350 x 100 mm dia
200	xxiv)350 x 150 mm dia
201	xxv)350 x 200 mm dia
202	xxvi)350 x 250 mm dia
203	xxvii)350 x 300 mm dia
204	xxviii)350 x 350 mm dia
205	xxix)400 x 80 mm dia
206	xxx)400 x 100 mm dia
207	xxxi)400 x 150 mm dia
208	xxxii)400 x 200 mm dia
209	xxxiii)400 x 250 mm dia
210	xxxiv)400 x 300 mm dia
211	xxxv)400 x 400 mm dia
212	Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. flangeSocket PN-10 i) 80 mm dia
213	ii)100 mm dia
214	iii)150 mm dia
215	iv)200 mm dia
216	v)250 mm dia
217	vi)300 mm dia
218	vii)350 mm dia
219	viii)400 mm dia
220	Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. Blank flange PN-10 i) 80 mm dia
221	ii)100 mm dia
222	iii)150 mm dia
223	iv)200 mm dia
224	v)250 mm dia
225	vi)300 mm dia
226	vii)350 mm dia
227	viii)400 mm dia
228	Providing and supplying D.I. fittings with ISI markMechanical joint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutaryduties and taxes such as GST levied by Gol and GoM in all respect etc. complete.MJ collar/coupling i) 80 mm dia
229	ii)100 mm dia
230	iii)150 mm dia
231	iv)200 mm dia
232	v)250 mm dia
233	vi)300 mm dia
234	vii)350 mm dia
235	viii)400 mm dia
236	Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev-ied by GOI & GOM in all respect including inspection charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988.,One collar should be supplied with each full length plain ended RCC pipe,One rubber ring should be supplied with each full length of socketed pipe,Class NP-III (For 2.00 m. length i)80 mm
237	ii) 100 mm
238	iii) 150 mm
239	iv) 200 mm
240	v) 225 mm
241	vi) 250 mm
242	vii) 300 mm.
243	viii) 350 mm.
244	ix) 400 mm.
245	x) 450 mm.
246	xi) 500 mm.
247	xii) 600 mm.
248	xiii) 700 mm.
249	xiv) 800 mm.
250	xv) 900 mm.
251	xvi) 1000 mm.
252	Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, etc.complete as directed by Engineerin- charge (For all class of pipes.) as per IS- 783-1985. i)80 mm
253	ii) 100 mm
254	iii) 150 mm
255	iv) 200 mm
256	v) 225 mm
257	vi) 250 mm
258	vii) 300 mm.
259	viii) 350 mm.
260	ix) 400 mm.
261	x) 450 mm.
262	xi) 500 mm.
263	xii) 600 mm.
264	xiii) 700 mm.
265	xiv) 800 mm.
266	xv) 900 mm.
267	xvi) 1000 mm.
268	Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges,conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. PE-100 a) 6 Kg/Sq. cm : i) 63 mm
269	ii) 75 mm
270	iii) 90 mm
271	iv) 110 mm
272	v) 125 mm
273	vi) 140 mm
274	vii) 160 mm
275	viii) 180 mm
276	ix) 200 mm
277	x) 250 mm
278	xi) 315 mm
279	Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II PE-100 a) 6 Kg/Sq. cm : i) 63 mm
280	ii) 75 mm
281	iii) 90 mm
282	iv) 110 mm
283	v) 125 mm
284	vi) 140 mm
285	vii) 160 mm
286	viii) 180 mm
287	ix) 200 mm
288	x) 250 mm
289	xi) 315 mm
290	Providing and Supplying Blue MDPE pipes conforming to ISO 4427:1996 manufactured fromvirgin resin PE 80 Food grade compounded Raw Material having Blue Colour only with quality assurance certificate from quality agencies like WRC / CIPET (India) / DVGM / KIWA / SPGN etc. for usage in Drinking Water system. The cost shall include testing of all materials, Inspection charges,transportation up to store, transit insurance, loading, as specified and directed, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete as specified and directed. PN 16 (SDR 9) i) 20 mm
291	ii) 25 mm
292	iii) 32 mm
293	iv) 40 mm
294	v) 50 mm
295	Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST leviedby GOI & GOM in all respect, etc. complete., Couplers 20
296	Couplers 25
297	Couplers 32
298	Couplers 40
299	Couplers 50
300	Couplers 63
301	Couplers 75
302	Couplers 90
303	Couplers 110
304	Couplers 125
305	Couplers 140
306	Couplers 160
307	Couplers 180
308	Couplers 200
309	Couplers 250
310	Couplers 315
311	Equal Tee 20
312	Equal Tee 25
313	Equal Tee 32
314	Equal Tee 40
315	Equal Tee 50
316	Equal Tee 63
317	Equal Tee 75
318	Equal Tee 90
319	Equal Tee 110
320	Equal Tee 125
321	Equal Tee 160
322	Equal Tee 180
323	Equal Tee 200
324	Equal Tee 250
325	Equal Tee 315
326	Elbow 90 Deg.20
327	Elbow 90 Deg. 25
328	Elbow 90 Deg. 32
329	Elbow 90 Deg. 40
330	Elbow 90 Deg. 50
331	Elbow 90 Deg. 63
332	Elbow 90 Deg. 75
333	Elbow 90 Deg. 90
334	Elbow 90 Deg. 110
335	Elbow 90 Deg. 125
336	Elbow 90 Deg. 160
337	Elbow 90 Deg. 180
338	Elbow 90 Deg. 200
339	Elbow 90 Deg. 250
340	Elbow 90 Deg. 315
341	Elbow 45 Deg. 32
342	Elbow 45 Deg. 40
343	Elbow 45 Deg. 50
344	Elbow 45 Deg. 63
345	Elbow 45 Deg. 75
346	Elbow 45 Deg. 90
347	Elbow 45 Deg. 110
348	Elbow 45 Deg. 125
349	Elbow 45 Deg. 160
350	Elbow 45 Deg. 180
351	Elbow 45 Deg. 200
352	Elbow 45 Deg. 250
353	Elbow 45 Deg. 315
354	Reducer 25X20
355	Reducer 32X20
356	Reducer 32X25
357	Reducer 40X32
358	Reducer 50X32
359	Reducer 50X40
360	Reducer 63X32
361	Reducer 63X40
362	Reducer 63X50
363	Reducer 75 x 63
364	Reducer 90X63
365	Reducer 90X75
366	Reducer 110X50
367	Reducer 110X63
368	Reducer 110X75
369	Reducer 110X90
370	Reducer 140X75
371	Reducer 140X90
372	Reducer 140X110
373	Reducer 160X90
374	Reducer 160X110
375	Reducer 160X140
376	Reducer 180X110
377	Reducer 180X140
378	Reducer 180X160
379	Reducer 200X63
380	Reducer 200X90
381	Reducer 200X110
382	Reducer 200X140
383	Reducer 200X160
384	Reducer 200X180
385	Reducer 250X110
386	Reducer 250X140
387	Reducer 250X160
388	Reducer 250X200
389	Reducer 315X140
390	Reducer 315X200
391	Reducer 315X250
392	End Cap 20
393	End Cap 25
394	End Cap 32
395	End Cap 40
396	End Cap 50
397	End Cap 63
398	End Cap 75
399	End Cap 90
400	End Cap 110
401	End Cap 125
402	End Cap 140
403	End Cap 160
404	End Cap 180
405	End Cap 200
406	End Cap 250
407	End Cap 315
408	Ferrule tapping tee 63x1/2''
409	Ferrule tapping tee 63x3/4''
410	Ferrule tapping tee 63x1''
411	Ferrule tapping tee 75x1/2''
412	Ferrule tapping tee 75x3/4''
413	Ferrule tapping tee 75x1''
414	Ferrule tapping tee 90x1/2''
415	Ferrule tapping tee 90x3/4''
416	Ferrule tapping tee 90x1''
417	Ferrule tapping tee 110x1/2''
418	Ferrule tapping tee 110x3/4''
419	Ferrule tapping tee 110x1''
420	Ferrule tapping tee 160x1/2''
421	Ferrule tapping tee 160x3/4''
422	Ferrule tapping tee 160x1''
423	Ferrule tapping tee 200x1/2''
424	Ferrule tapping tee 200x3/4''
425	Ferrule tapping tee 200x1''
426	Ferrule tapping tee 250x1/2''
427	Ferrule tapping tee 250x3/4''
428	Ferrule tapping tee 250x1''
429	Ferrule tapping tee 315x1/2''
430	Ferrule tapping tee 315x3/4''
431	Ferrule tapping tee 315x1''
432	Electrofusion reducing tee 32x32x20
433	Electrofusion reducing tee 32x32x25
434	Electrofusion reducing tee 40x40x20
435	Electrofusion reducing tee 40x40x25
436	Electrofusion reducing tee 50x50x20
437	Electrofusion reducing tee 50x50x25
438	Electrofusion reducing tee 50x50x32
439	Electrofusion reducing tee 50x50x40
440	Electrofusion reducing tee 63x63x20
441	Electrofusion reducing tee 63x63x25
442	Electrofusion reducing tee 63x63x32
443	Electrofusion reducing tee 63x63x40
444	Electrofusion reducing tee 63x63x50
445	Electrofusion reducing tee 75x75x40
446	Electrofusion reducing tee 75x75x50
447	Electrofusion reducing tee 75x75x63
448	Electrofusion reducing tee 90x90x50
449	Electrofusion reducing tee 90x90x63
450	Electrofusion reducing tee 90x90x75
451	Electrofusion reducing tee 110x110x50
452	Electrofusion reducing tee 110x110x63
453	Electrofusion reducing tee 110x110x75
454	Electrofusion reducing tee 110x110x90
455	Electrofusion reducing tee 160x160x50
456	Electrofusion reducing tee 160x160x63
457	Electrofusion reducing tee 160x160x75
458	Electrofusion reducing tee 160x160x90
459	Electrofusion reducing tee 160x160x110
460	Electrofusion reducing tee 200x200x63
461	Electrofusion reducing tee 200x200x75
462	Electrofusion reducing tee 200x200x90
463	Electrofusion reducing tee 200x200x110
464	Electrofusion reducing tee 200x200x160
465	Electrofusion reducing tee 250x250x63
466	Electrofusion reducing tee 250x250x75
467	Electrofusion reducing tee 250x250x90
468	Electrofusion reducing tee 250x250x110
469	Electrofusion reducing tee 250x250x160
470	Electrofusion reducing tee 250x250x200
471	Electrofusion reducing tee 315x315x200
472	Electrofusion reducing tee 315x315x250
473	Spigot Long Neck Pipe End (Stub End) for Electro Fusion joint LNPE 63
474	LNPE 75
475	LNPE 90
476	LNPE 110
477	LNPE 125
478	LNPE 140
479	LNPE 160
480	LNPE 180
481	LNPE 200
482	LNPE 250
483	LNPE 315
484	Providing & Supply of Compression fittings, PN16 rated in conformation to ISO:14236-2000 and shall be tested as per ISO:3459, ISO:3501 & ISO:3503, suitable for drinking water & approved by WRAS, UK/ KIWA etc, in food grade polypropylene and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete.Male Adaptor 20 x 1/2\\"
485	Male Adaptor 25 x 3/4\\"
486	Male Adaptor 32 x 1\\"
487	Male Adaptor 40 x 1 \\"
488	Male Adaptor 50 x 1/2\\"
489	Male Adaptor 63 x 2\\"
490	Female Adaptor 20 x 1/2\\"
491	Female Adaptor 25 x 3/4\\"
492	Female Adaptor 32 x 1 \\"
493	Female Adaptor 40 x 1 \\"
494	Female Adaptor 50 x 1 \\"
495	Female Adaptor 63 x 2\\"
496	Coupling 20 x 20
497	Coupling 25 x 25
498	Coupling 32 x 32
499	Coupling 40 x 40
500	Coupling 50 x 50

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Maharashtra Tenders

Construction Tenders

Pipe Line Project Tenders

Pipe Laying Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Maintenance Works Of Distribution System At Daund Municipal Council, Daund-Maharashtra

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Maintenance Works Of Distribution System At Daund Municipal Council, Daund-Maharashtra

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us