Tender For Addition Alteration To Bldg No P-316 Under Ge Bhopal
Tender Value
35.82 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
3 days left
EMD
71640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Bldg No P-316 Under Ge Bhopal
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Jun-2026 | Date Corrigendum | Date | 07-Jul-2026 |
| 2 | 07-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Consultancy services for evaluation, design and preparation of Arch and structural drgs are as follows:Consultancy services for structural Evaluation of Existing structure and feasibility of new structure with the existing structure. Assessment of layout of Existing Fdn, planning and Layout of New Fdn as per Existing Guidelines i.e. NBC-2016 and relevant IS codes.Consultancy services for preparation of Arch design based on plan enclosed and detailed drawing in adherence to the provisions of zonal specification 2018, NBC-2016, IS codes, Scale of Accommodation for Defence Services-2022 and other standard architectural and Engineering practices/norms as per the terms and conditions enclosed as Appx 'A&'B'.Consultancy services for complete Structural design for new project incorporating with all the input parameters as per arch drgs, IS codes etc. for analysis & results. Structural drawings shall be prepared incorporating the geometry in accordance with arch drawings for schedule of reinforcement for all elements and section details wherever necessary. Final submission of all the structural drawings duly supported by relevant design data (STAAD File) in all size in hard & soft copy for all the category of building in desired configuration as per general parameter as per Appx 'A'. The parameter shall be confirmed with IS. Proof checking & Vetting:- Vetting and submission of all structural drawings as per latest Indian standard codes & practice in one set of tracing, should be vetted from IIT/NIT and finally approved by Acception Officer. Note: The firm of consultant should be enlisted and approved by E-in-C branch. BOQ tender preparation and 3D Modelling:- Consultancy services for providing detailed estimate (BOQ) for the bldg/structure of all the bldgs covered in Adm Approval of subject job and abstract, detailed market rate analysis of each bldg incl taking of quantity and abstract priced on SSR 2020 for each bldg complete as per requirement given below:- (a) Quantity of each size of reinforcement shall be given. (b) The method of measurement estimating detailed quantity shall be laid down in preambles as other provns in MES, SSR Part-I 2009 and SSR part -II 2020 and relevant part of IS 1200 latest.(c) Abstract of bill of quantities (detail quantities shall be prepared based on SSR-2020 (Part-II) (Rates) if certain items are not available in MES SSR-2020 then market rates duly supported with price list shall be taken for working out the rates with minimum three equivalent makes of items along with rate analysis. (d) The consultant shall be required to carry out detailed estimate, abstract and market analysis by using various formulas in MS Excel software. Plan and specification to be taken from AGE B/R-I for Estimation. (e) The consultant shall submit two hard copies of the estimate and abstract alongwith soft copy in MS Excel format in CD.(f) The detailed estimate shall require to be checked by CWE Bhopal by detailing a rep to this office before submitting final hard copies. (g) For market rate analyse labour wages whichever is higher of the following shall be considered for the area where work is to be executed: - (i) Prevailing Local Labour wages at concern area (ii) Latest minimum labour wages circulated by the Government (iii) Latest Minimum labour wages circulated by Chief Labour Commissioner (Central), Ministry of Labour & Employment, GOI. |
| 2 | Appx ‘A’1. Location of Structure: Bhopal2. Type of Construction: RCC Framed with minimum concrete grade of M-25 and reinforcement Steel Fe 550D3. Loads: According to IS-8754. Seismic Zone: II5. Fire Rating: 2 Hours6. Filler Walls: Fly Ash Brick Masonary7. SBC: 18 to 25 MT/Sqm (Soft Disintegrated rock strata upto 1.5 m depth)8. Plinth Area of Bldg: 2789 Sqm (whole)9. Plinth Area of Foyer: 100 Sqm (approx.)10 Specification of Bldg: Permanent11. Line plan of Bldg: To be approved by user/user rep. |
| 3 | Demolition of RCC roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended works etc |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 5 | Demolition of Brick or Stone Masonry built in cement mortar etc complete complete all as specified and directed. |
| 6 | Demolition of for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling precast RCC jallies and post of any size and thickness complete all as specified and directed. |
| 7 | Earth work in soft disintegrated rock excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and directed. |
| 8 | M&L for PCC (1:4:8) type D-2 using 40 mm graded aggregate as in foundation filling & mass concrete complete all as specified and directed. |
| 9 | M&L for M-25 Reinforced cement concrete (design mix) (20 mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 10 | M&L for M-25 Reinforced cement concrete (design mix) (20 mm graded aggregate) as in Columns, pillars, piers, posts and struts etc complete all as specified and directed. |
| 11 | M&L for M-25 Reinforced cement concrete (design mix) (20 mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 12 | M&L for M-25 Reinforced cement concrete (design mix) (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 13 | M&L for Mild steel TMT bars 10mm dia and over,, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends stirrups and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 14 | ditto as above but 6 to 8mm dia as in stirrups complete all as specified and as directed. |
| 15 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter surface flat with fair finished surfaces complete all as specified and directed. |
| 16 | M&l for Formwork sides of pillars, posts, struts, piers, columns and stanchions.; vertical or to batter surface flat and fair finished surfaces complete all as specified and directed. |
| 17 | M&l for Formwork to Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc..; vertical or to batter surface flat and fair finished surfaces complete all as specified and directed. |
| 18 | M&L for formwork to suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) with fair finished surfaces complete all as specified and directed. |
| 19 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built inbuilt in cement mortar 1:4 complete all as specified and directed. |
| 20 | M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in in cement mortar 1:4 complete all as specified and as directed. |
| 21 | Material and labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces in 1:6 cement mortar and finished even and smooth without using extra cement complete all as specified and directed. |
| 22 | Rendering 15 mm thick on fair face of brick work or concrete surfaces or brick masonry surfaces or surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L 5 mm thick rendering in cement plaster 1:3 as in ceiling on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement all as specified and directed. |
| 24 | Material and labour for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed |
| 25 | M&L for preparation of newly plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion over a coat of compatible primer complete all as specified and directed. |
| 26 | Preparation of newly plastered surfaces of walls and applying three coats of white wash on ceiling complete all as specified and as directed. |
| 27 | S&F of 12mm thick toughened glass as in hinged doors, partitions or as fixed glass and similar work including cutting to shape, drilling holes required and fixing with necessary clips complete all as specified and directed. |
| 28 | S&F of 12mm thick frosted toughned glass as in hinged doors, partitions or as fixed glass and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 29 | S & F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed |
| 30 | S&F of solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed. |
| 31 | S&F heavy duty hydraulic door spring closer fixed to floor for heavy toughned glass door including top SS bracket with heavy duty pivot for fixing of glass door with glass partition complete all as specified and directed. |
| 32 | S&F of fancy type stainless steel body (SS-304 grade) bottom lock for toughned glass door with two/three set of keys complete all as specified and directed. |
| 33 | S&F of SS 300mm long fancy H-type curve/ straight as required handle set made out of 25mm dia stainless steel pipe fixed to toughned glass doors complete all as specified and directed. |
| 34 | M&L for double charged color Virified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 35 | M&L for 25mm thick cement concrete in foundations, filling and mass concrete type B-1 1:2:4 using 20mm graded stone aggregate complete all as specified and directed. |
| 36 | M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finish in 1:6 cement mortar complete all as specified and directed. |
| 37 | M&L for light shade virified Ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm as in floors and skirting set and jointed in neat cement slurry over acoat of 15mm thick in cement mortar 1:6 and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. |
| 38 | M&L for coloured glazed ceramic tiles 600 x 300 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on vertical surfaces such as skirtings, dados and risers to steps etc. over and incl. 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed |
| 39 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 40 | Area not exceeding 2 sqm |
| 41 | Area exceeding 2 sqm |
| 42 | Supply and fix 4.0mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 43 | Supply and fix stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 44 | Supply & fixing of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 incl necessary fixing to walls complete all as specified and directed. |
| 45 | S&F of vitreous China over counter (table top) wash hand basin, white, oval or rectangle shape of minimum size 450x350x115mm including PVC connection and CP waste coupling and PVC corrugated waste pipe upto floor trap level complete all as specified and as directed. |
| 46 | S&F Vitreous china Rimless Wall Hung WC, Hinges, Accessories set like rag bolts/ gel gasket etc.(excluding flushing cistern & flush pipe) complete all as specified and as directed. |
| 47 | S&F PP Soft Close Slim Seat Cover fixed in water closet complete all as specified and as directed. |
| 48 | S&F PVC Single Piece Concealed Cistern Body (Front Actuation) with Installation Kit flush pipes and chrome finish flush control plate complete all as specified and as directed. |
| 49 | S&F fancy type 15 mm bore CP Pillar cock tall height, cast copper alloy, with capstan heads, screwed down high pressure, with long screwed shanks and fly-nuts, complete all as specified and directed. |
| 50 | S&F 15mm bore fancy type CP bib tap long body, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified & as directed. |
| 51 | S&F of CP brass fancy type angle cock with long shank & as concealed type complete all as specified and directed. |
| 52 | Supply and fixing PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified and directed. |
| 53 | S&F stainless steel Toilet paper holder with flap complete all as specified and directed. |
| 54 | S&F Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and as directed. |
| 55 | S&F 5mm thick bevelled edge Looking mirror glass of selected quality in required size fixed with suitable SS stud/bracket on walls complete all as specified and directed. |
| 56 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 57 | S&F tubular towel rail 600mm long including a pair of bracket with matching specification and size complete all as specified and as directed. |
| 58 | S&F PTMT towel ring of approved design and pattern complete all as specified and directed. |
| 59 | S&F Chromium plated two way bib tap 15mm dia fixed in GI/ CPVC tubing complete all as specified and directed. |
| 60 | S&F Health faucet( ABS Body) suitable for 15mm dia pipe with 1.00m long flexible tube and ABS wall hook incl making connections and fixd in position complete all as specified and directed. |
| 61 | Supply and laying of 20mm bore CPVC pipes SDR 11 & CPVC SDR 11 brass fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 62 | Supply and laying of 25mm bore CPVC pipes SDR 11 & CPVC SDR 11 brass fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 63 | S&F CPVC Nipple suitable for HDPE water tank (Minimum weight 25mm- 65gms) complete all as specified and directed. |
| 64 | S&F 500 Ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed. |
| 65 | S&F 25mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 66 | S&F PVC (SWR) floor trap plain with SS grating having dia meter of out let 75mm including jointing with solvent cement complete all as specified & as directed. |
| 67 | Supply & fixing PVC (SWR) pipes 110 mm dia bore single socketed in any length with rubber rings joints laid in trenches or in floors of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed. |
| 68 | Supply & fixing PVC (SWR) pipes 75 mm dia bore single socketed in any length with rubber rings joints laid in trenches or in floors of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed. |
| 69 | Supply & fixing PVC (SWR) pipes 110 mm dia bore single socketed in any length with rubber rings joints laid in fixed to walls including heavy duty clamps of the following bore complete all as specified and as directed. |
| 70 | Supply & fixing PVC (SWR) pipes 75 mm dia bore single socketed in any length with rubber rings joints laid in fixed to walls including heavy duty clamps of the following bore complete all as specified and as directed. |
| 71 | Supply & fixing 75 mm dia PVC (SWR) junction single (single `T') equal or unequal with accessable door of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed. |
| 72 | Supply & fixing 75 mm dia PVC (SWR) pipe bend with accessable door of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed. |
| 73 | Supply & fixing 110 mm dia PVC (SWR) pipe bend with accessable door of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed. |
| 74 | M&L for applying 1-2mm thick wall care putty (to be finished in two coats) on wall complete all as specified and as directed |
| 75 | Supply and fixing PVC wall lining/panelling (approved color and pattern) consisting of 5mm thick plain color printed PVC sheet colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. |
| 76 | Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. |
| 77 | M&L for exterior / interior wall texture finish with preparation and cleaning thoroghly the surface,Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and as directed. |
| 78 | S&F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mmthick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surroundingwall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 79 | M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) and applying two coats of oil bound distemper complete all as specified and direcetd. |
| 80 | Demolition of stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed. |
| 81 | M&L for 18-20mm thick granite (of approved texture and colour ) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite complete all as specified and as directed. |
| 82 | M&L for Granite tiles 18-20mm thick (approved color and texture) machine cut, bedded including 20mm thick screed bed CM 1:6 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 83 | M&L for 50mm thick Sand stone slabs in sun-shades, chajjas,shelves, cills, landings,cover stones, templates, platform bases etc.n exc. 2m in length,punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 complete all as specified and directed. |
| 84 | Material & Labour for providing and fixing stainless steel railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. |
| 85 | S&F of second class hardwood wroght timber in scantling used for wooden moulded railing/ chowkhat / framed work in any shape complete all as specified and as directed. |
| 86 | M&L for preparing the new wooden flooring surface / railing and applying two or more coats of french polishing over and including a coat of wood filler etc complete all as specified and directed. |
| 87 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed. |
| 88 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain or moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with and including 100mm SS butt hinges (min 03 Nos) and full body threaded star headed counter sunk S.S screws and fixing in the frame at site complete all as specified and directed. |
| 89 | S&F Brass barrel tower bolts, with cast or sheet barrel and rolled of size 150mm complete all as specified and directed. |
| 90 | S&F 125 mm size Extruded brass handles, fabricated type polished, complete all as specified and directed. |
| 91 | S&F 250mm Brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 92 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft/disintegrated rock complete all as specified and directed. |
| 93 | S& F 150mm internal dia reinforced concrete pipes class NP-2 laid and jointed complete with collars complete all as specified and directed. |
| 94 | S&F for Cement concrete C-2 1:3:6 bed to drain pipes 150 mm bore including packing under and completely surrounding pipes with concrete after they are laid and tested; in complete all as specified and directed. |
| 95 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains incl all necessary form work complete all as specified and directed. |
| 96 | M/L for precast cement concrete type B1 1:2:4 using 20mm graded aggete as in cover slabs (for manholes etc.) including necessary form work and set in cement mortar 1:4 complete all as specified and directed. |
| 97 | Material and labour for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard and dense soil complete all as specified and as directed. |
| 98 | Material and labour Hardcore of guage n.exc 63mm, deposited, spread and leveled in layers n exc 15cm thick, watered and rammed to a true surface in broken bricks complete all as specified and directed. |
| 99 | Material and labour for moorum/red bajri filling in floors or paving, laid in layers n.exc 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 100 | Material and labour for acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors complete all as specified and directed. |
| 101 | Material and labour Screed bed or beding layer of mortar 15mm thick for laying floor finish in CM 1:4 complete all as specified and directed. |
| 102 | M&L for PCC Type B0 1:2:4 using (12.50mm graded stone aggregate) as in coping including necessary form work complete all as specified and directed. |
| 103 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 104 | Removing excavated material exc 50m and not exc. 250m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed. |
| 105 | Material and labour for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard and dense soil complete all as specified and as directed |
| 106 | Returing filling including spreading levelled watering and well ramming in layer not exc 25 cm complete all as specified and directed. |
| 107 | Removel of excaveted material n.exc 50mm and deposited where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 108 | M&L Hardcore of guage n.exc 63mm, deposited, spread and leveled in layers n exc 15cm thick, watered and rammed to a true surface in broken bricks complete all as specified and directed. |
| 109 | M&L for moorum/red bajri filling in floors or paving, laid in layers n.exc 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 110 | M&L PCC 1:4:8 type D-2 40mm graded stone aggregate in foundation, filling and mass concrete etc complete all as specified and directed. |
| 111 | M&L for acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors complete all as specified and directed. |
| 112 | M&L Screed bed or beding layer of mortar 15mm thick for laying floor finish in CM 1:4 complette all as specifed and directed |
| 113 | M&L for Providing, cement concrete 1:2:4 type B-1 (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 114 | M&L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FR-LS cables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FR-LS cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specified and as directed. (Note cost of cutting chase and making good shall be included in the quated rates) |
| 115 | All as per item No 111.00 above but one socket outlet 5 pin 5/6 Amps on independent board controlled by one, one way switch complete all as specified and as directed. |
| 116 | All as per item No 111.00 above but one socket outlet 5 pin 5/6 Amps on same board with other one, one way switch complete all as specified and as directed. |
| 117 | All as per Srl item No. 111.00 here in before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire complete all as specified and directed. |
| 118 | All as per item No 111.00 above but for socket out let, 15/16 Amps on independent board with 4 Sqmm size cable and 4 Sqmm for continuty earth wire connected to common earth dolly complete all as specified and as directed. |
| 119 | S & F modular switch one way 6 Amp one module, 240 volts complete all as specified and directed. |
| 120 | S & F modular switch one way 16 Amp one module, 240 volts complete all as specified and directed. |
| 121 | Supply and fixing modular socket outlet 2-in-1, 2/3 pin, 6/16 Amps, 240 volts, controlled by one switch complete all as specified and directed. |
| 122 | Supply and fixing modular socket outlet 2-in-1, 2/3 pin, 6 Amps, 240 volts, controlled by one switch complete all as specified and directed. |
| 123 | S & F modular metal flush box of 6 module complete all as specified and directed. |
| 124 | S & F modular metal flush box of 4 module complete all as specified and directed. |
| 125 | S & F modular metal flush box of 3 module complete all as specified and directed. |
| 126 | S & F modular white cover plate with frame of 6 module complete all as specified and directed. |
| 127 | S & F modular white cover plate with frame of 4 module complete all as specified and directed. |
| 128 | S & F modular white cover plate with frame of 3 module complete all as specified and directed. |
| 129 | S&F ceiling rose 3 terminals 65x25 mm dia poly carbonate isolated complete all as specified and as directed. |
| 130 | S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 131 | Supply and fixing modular fan regulator complete all as specified and directed. |
| 132 | S&F 12 watt invertor rechargeable B22D type LED bulb cool day light with min 4 hrs back up, 230/240V, AC complete all as specified and as directed. |
| 133 | S&F 0.5 watt engaged LED bulb B22 red in colour, 230/240V, AC complete all as specified and as directed. |
| 134 | S&F 0.5 watt engaged LED bulb B22 green in colour, 230/240V, AC complete all as specified and as directed. |
| 135 | S&F LED tube light fitting bright 40 watt. slim elegant design. and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. |
| 136 | S & F modular bell push 6 Amp one module, 240 volts complete all as specified and directed. |
| 137 | S&F call bell Ding Dong 230V, AC, single phase ISI marked complete all as specified and as directed. |
| 138 | S&F of building security light fitting complete with 45 watt LED type pressure die cast aluminium housing IP 65 and heat resistant toughened glass with frame protection and better optics for uniform distribution complete fixed bracket made out of GI pipe 32 mm dia (light grade) 1.5 metre long and MS clamp and nut bolts washers and connected with three core cable 1.5 sqmm from ceiling rose to fittings connector complete all as specified and as directed. |
| 139 | Supply & fixing in curved 6 watt LED warm white adjustable multiple angle mirror Light including inbuilt LED driver new generation, energy saving, environmental friendly, long life aesthetically designed for diffused lighting with high power LED as light source complete all as specified and directed. |
| 140 | Supply and fixing decorative ceiling fans complete with 4 blades , down rods, and accessories, 230 V,40 Watt ,1200 mm sweep,RPM: 260. Min air delivery 14700 m3/hr with service value 6.00 BEE. 5 star rated with brushless direct current (BLDC) Motor, aerodynamic Winglet Blades, Dust Resistant with remote controller complete all as specified and as directed. |
| 141 | Supply and fix exhaust fan, made of sturdy Engineering plastic body AC single Phase. 230V 50 Hz,RPM 1200, Copper winding of size 300 mm sweep with, blades, and frame and louvers including complete all as specified and as directed. |
| 142 | S&F LED ultra slim decorative aluminium casted edge ceiling light, recess mounting LED 2 x 2, luminaire 36 watt white in colour with all accessories internally pre-wired and including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm three core complete all as specified & directed. |
| 143 | Supply & fix wall mounting oscillating type Air Circulator 250 mm sweep fans with sleek of same colour suitable for 230 volts single phase 50 Hz complete all as specified & directed. |
| 144 | Supply and fix of LED slim square/circular panel light fitting for surface ceiling light 12 watt, colour white including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector complete all as specified and as directed. |
| 145 | Supply & Fix rechargeable invertor type recessed mounting COB Spot LED light round downlighter designed with excellent thermally managed luminaire 12 watt 95 Lumen/Watt, 220V AC Die-cast Aluminium type with high efficiency PMMA diffuser soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with driver three core flexible coppder conductor cases of suitable size complete all as specified and directed. |
| 146 | Supply & fixing Flexible LED strip uses high brightness SMD LED as the light source for indoor application only.luminaire 24 watt, 220V AC with IP-65 protection high efficiency light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with three core flexible coppder conductor cases of suitable size (Flexion Neo Led Strip 24 W of any colour) complete all as specified and directed. |
| 147 | S&F automatic Touch-free hand drier mount on wall 1200 Watts,Voltage : 220V (50Hz), 15m/s wind speed of hot air of hand drying time: 15-20 Seconds, and it is made of ABS material for ensured durability which both corrosion-proof and lightweight,environmentally material & Low noice energy consumption complete all as specified and directed. |
| 148 | S&F sheet metal enclosure for MCB, DB, TPN, 415 Volts, 200 amps rated busbar, 4 way, Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first class hardwood of suitable size for mounting of DB box complete all as specified and as directed. NOTE:- MCB shall be measured and paid seperatly. |
| 149 | Supply and fix MCB 6-40 amps, 10 KA, SP 240 volt, 'C' series complete all as specified and as directed. |
| 150 | S & F MCB TPN suitable for 240 volts, 'B' curve,AC supply 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. |
| 151 | M&L for sub main wiring with approved colour coding as per IS (Red, blue,Yellow,Black and Green for three phase circuits) with four single core PVC insulated ISI marked FRLS cable 1100V unsheathed with stranded copper conductor of 10 sqmm nominal cross section area and drawing into 20mm external diameter rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 and PVC insulated stranded copper conductor of 10 sqmm nominal cross section area as earth wire complete all as specified and directed. Note : (i)Wiring to be done as per approved colour code in IE rule. (ii) Four runs of 10 sqmm cable, one run of 10 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. |
| 152 | M&L earthing complete with galvanised steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m deep below normal ground level and connected to and including GI earth lead wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 15 mm bore light grade up to 7.5 metre long complete all as specified and as directed.NOTE :- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately. |
| 153 | Supply and fix GI tubing medium grade of size 20 mm dia ISI Mark galvanised laid in floors/walls including fittings such as bends elbows reducers and complete accessories all as specified and as directed. |
| 154 | Supply and fixing Gun metal gate valve/glove valve ISI marked with Iron wheel head screwed both end for GI tubing of size 20 mm dia complete all as specified and as directed. |
| 155 | S&F 500 ltrs capacity Rotational moulded 3 layer HDPE water storage tanks (Cylindrical vertical with closed top) Dimen hoisted and fixed in position all as specified in IS Code -12701-1996 including 20mm dia tank nipple complete all as specified and directed |
| 156 | S&F of 20 mm PVC float valve high pressure of PTMT with epoxy coated aluminium rod & hight density plastic ball complete screwed for iron pipe or brass furred and fixed with fittings such as (socket, nipple, union) etc complete all as specified and directed |
| 157 | Supply & Install hi wall split units adjustable invertor Split AC with de humidification anti microbial air filtration,eco friendly refrigerant,(R-32) to protect environment wide voltage range operation 110-285 Volt,high ambient cooling,anti corrison cooling coil Indoor/Outdoor unit complete with cordless remote control having minimum 5 star rating and EER 3.2 of capacity 2 TR including all necessary fitting fixtures for installation and smooth functioning complete all as specified and as directed. |
| 158 | Supply & Fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and as directed. |
| 159 | Supply and fix sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket IP 43 protection complete with one Single pole MCB 240 V grade 25/20 Amp complete all as specified and directed . |
| 160 | M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with four single core PVC insulated ISI marked FRLS cable 1100V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section area and drawing into 20mm external diameter rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 and PVC insulated stranded copper conductor of 4.0 sqmm nominal cross section area as earth wire complete all as specified and directed. Note : (i)Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 4.0 sqmm cable, one run of 4.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 14, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender