Tender For Special Repair To Bldg No T-04, T-05 And T-08 At 45 Rpas Base Of 666 Army Avn Sqn (R&O) (Kargil) Under Age B/R-I Of Ge 865 Ews, Leh
Tender Value
29.69 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
3 days left
EMD
59400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No T-04, T-05 And T-08 At 45 Rpas Base Of 666 Army Avn Sqn (R&O) (Kargil) Under Age B/R-I Of Ge 865 Ews, Leh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floor and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed. |
| 2 | Dismantling floor, hearth or wall tiling including wall cement mortar bedding (But not backing ) and rubbish of premises complete all as directed. |
| 3 | M&L for vetrified ceramic tiles 10mm thick (light shade ) (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and screed bed with M (1:6) 15mm thick for laying floor tiles all as specified and directed. |
| 4 | M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11Sqm and nexc .18 Sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the screed bed with CM (1:6) 15mm thick laying floor tiles complete all as specified and directed. |
| 5 | M&L for (350mmx250mmx7mm/450mmx350mmx 7mm thick ) coloured glazed ceramic tiles set on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or colored cement to match complete including 10 mm thick rendering in cement mortar 1:4 all as specified and directed for shade, pattern and laying of tiles. complete all as specified and directed. |
| 6 | M&L for 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in sub base of floor complete all as directed by Engr-in-charge. |
| 7 | M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets or as specified by manufacture including dismantlng all as specified and directed. |
| 8 | Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed |
| 9 | M&L for 10mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed |
| 10 | M&L for preperation of new plastered wall surface of any description and applying two coat of cement based paint over a coat of chalk whiting complete all as specified and as directed. |
| 11 | M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge. |
| 12 | Supply only integral liquid water proofing compound complete all as specified and directed.Make : Pidilite/Sika |
| 13 | M & L Preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistant priming paint on surfaces of walls. |
| 14 | Dismantling plain or corrugated steel /fibre sheeting any guage thickness including nanital or similar pattern complete all as specified and as directed, |
| 15 | S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws as specified |
| 16 | Ditto all as item No 15 above but except sheeting, complete all as specified and as directed. |
| 17 | S&F Fibre glass reinforced translucent plain sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof ,wall etc complete all as specified and as directed. |
| 18 | M&L for preperation of existing treatment on steel / CGI sheets of any description and applying two coat of synthetic enamel paint (galvanisatin should be removed if required) ,complete all as specified and as directed. |
| 19 | Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and as directed. |
| 20 | S&F MS Rolled sections in main and cross beams,hip and jack rafters; purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed. |
| 21 | M&L preparation of new untreated steel surfaces exc. 10 cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 22 | Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed by Engr-in-charge. |
| 23 | Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as directed by Engr-in-charge. |
| 24 | S&F anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixinf etc complete all as specified. |
| 25 | S&F Anodised aluminium window and ventilator shutters,including aluminium jali fixed in one side, side hung type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos) hinges type B-21 100mm long (2 Nos) suitable handle (1 Nos) etc. complete all as specified. |
| 26 | S&F for 40 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats , complete all as directed by Engr-in-charge. |
| 27 | S&F100mm long mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed. |
| 28 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed. |
| 29 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 30 | S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed |
| 31 | M&L sheet glass 3mm thick ordinalry quality and glazing with wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed. |
| 32 | M&L for preperation of new or old untreated wood or wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamal paint over a coat of pink primer complete all as specified and as directed. |
| 33 | S&F in repair Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples. |
| 34 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding including dismantlng complete all as specified and as directed. |
| 35 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in ceiling, shelves/boarding including dismantlng complete all as specified and as directed. |
| 36 | M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section including dismantlng .complete all as specified and as directed. |
| 37 | M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section including dismantlng complete all as specified and as directed. |
| 38 | M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws including dismantlng complete all as specified and as directed |
| 39 | S & F 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge and including taking up or down 25 mm bore steel tubing / PPR pipe and connections and set aside for re-use or removal to store. |
| 40 | S & F 32mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge and including taking up or down 32 mm bore steel tubing / PPR pipe and connections and set aside for re-use or removal to store. |
| 41 | S&F in repair 25mm outer dia PPR Gate valve (Brass insert) confirming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site completely all as specified and directed by the Engr-in-Charge. |
| 42 | S&F in repair 32mm outer dia PPR Gate valve (Brass insert) confirming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site completely all as specified and directed by the Engr-in-Charge. |
| 43 | S & F 500 litres capacity rotational moulded polyethylene water storage tanks inner and out white, two layers ISI marked (Cylindrical vertical, with closed top), hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (ie GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling water tanks and removing to store Exc 250 and n exc 500 ltrs capacity complete all as specified and as directed by Engr-in-Charge. |
| 44 | S & F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed. |
| 45 | S & F in repair Vitreous china wash down water closet (Pedestal), white (EWC) excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed by Engr-in-Charge.Make : CERA/JAQUAR/KOHLER or equivalent. |
| 46 | S&F vitreous china premium/1st quality wash basin full pedestal, white, flat back, size 500x400 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer and incl 32mm brass CP waste coupling half thread and complete in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified.complete all as specified and as directed.Make : Cera, or equivalent from Parryware as approved by AO |
| 47 | S & F in repairs 750 mm long, 32/ 40 mm dia., PVC plain Waste pipe for sinks / wash hand basins complete all as specified and directed. |
| 48 | S&F in repairs, 15 mm bore, PVC connection pipe 600 mm long with PTMT nuts at both ends complete all as specified and directed. |
| 49 | S&F in repair flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.Make : Hindware (Sleek Essence Dual Flush) or Cera (Corona) or Prayag (Vintage) equivalent from Parryware |
| 50 | S&F in 15 dia Angle stop valves, fancy type chromium plated with lonk shank and cup cast copper alloy (concealed type), screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipes complete all as spd. |
| 51 | S & F in fancy type 15mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfy handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed. |
| 52 | S&F in 15mm bore CP wash basin mixer for mixing hot & Cold water copper alloy fancy type high pressure screwed for iron pipe and fixed in repair. |
| 53 | S&F in repairs health faucet (ABS Body) mild steel shromium plated suitable for 15 mm dia with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 54 | S&F in repair 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with cromium plated brass screws and cup washers complete all as specified. |
| 55 | S & F in 40mm waste coupling of PTMT for sink and wash hand basin (Half or full threaded ) (Minimum Weight 45 grams) complete all as specified and as directed. |
| 56 | S&F in repairs Soap dish Cromum plated fancy type. complete all as specified and as directed. |
| 57 | M&L PVC (SWR) 75 mm dia floor trap with plain with grating including jointing with solvent cement complete all as specified and directed. |
| 58 | Supply & Fixing in repair sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12 cm wide with chromium plated bracket gourd and railing 60 cm long, complete all as specified and directed. |
| 59 | S&F in repair 19mm dia mild steel, chromium plated curtain rods fancy type , with brackets, end bulbs all as specified and as directed by Engr-in-charge. |
| 60 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed. |
| 61 | S & F in repairs 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 62 | S&F in PVC(HDPE) SWR 75 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, laid in treches or in floor complete all as specified and directed by Engr-in-Charge.Make : Astral / Prince / Finolex |
| 63 | S&F in repairsTowel rail 600mm long Cromum plated (Minimum weight 190 gms). complete all as specified and as directed. |
| 64 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar. |
| 65 | Demolition of reinforced cement concrete in ground floor and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed. |
| 66 | M&L for Reinforcement cement concrete (Nominal Mix) in type B1 1:2;4 ( 20mm graded aggregate) as in slabs supported of walls , beams and columns in floors, roofs, landings, balconices , canopies , deck slabs and in shelves etc complete all as specified and as directed. |
| 67 | M &L for form work to soffits of suspended slabs flat type such as roof slabs , floor slabs , landings and similar work nto exceeding 200mm thick (Horizontal or slopping etc complete all as specified and as directed. |
| 68 | M&L mild steel TMT bars 10mm dia and over, cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bar, complete all as specified and as directed. |
| 69 | S & F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, Waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed. |
| 70 | M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:4, complete all as specified and as directed. |
| 71 | Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as spfd and directed by Engr-in-Charge. |
| 72 | Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead complete all as specified and directed for the followings:- |
| 73 | One light/exhaust fan point controlled by one way switch |
| 74 | One switch socket outlet 6 Amps, 230 volts point on Same board |
| 75 | One switch socket outlet 6 Amps, 230 volts point on independent board |
| 76 | All as item No 72 above, but using cables 4 Sq mm size |
| 77 | Supply and fix in replacement of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB specified and/or directed by Engr-in-Charge. |
| 78 | Supply and fix Switch piano flush button single pole 6 Amps 230 volts one way complete all as specified and/or directed by Engr in Charge. |
| 79 | Supply and fix Socket outlet 5 pin 6 Amps flush type.230 volts complete all as specified and/or directed by Engr-in-Charge directed. |
| 80 | Supply and fix switch Socket combination out let multi purpose 16 Amps 230 volts complete all as specified and/or directed by Engr-in-Charge . |
| 81 | Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible complete all specified and/or directed by Engr-in-Charge copper conductor cable of suitable size complete. |
| 82 | Supply and fix in replacement of Ceiling rose, surface Bakelite three terminals complete all as specified and/or directed by Engr-in-Charge |
| 83 | Supply & Fixing in replacement of LED lights fitting 1 x 20W, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and/or directed by Engr-in-Charge |
| 84 | Supply & Fixing in replacement of LED light fitting 1X9 W/ 1X 10 W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and/or directed by Engr-in-Charge. |
| 85 | Supply & fix in replacement of sheet metal enclosures for DB's Single pole and Neutral 12 way with 200 Amps rated bus bar complete all as specified and/or directed by Engr-in-Charge |
| 86 | Supply and fixing in replacement of 240 V 10 KA 'C' Curve SPN 63 Amps complete with connection testing and commissioning complete all as specified and/or directed by Engr-in-Charge |
| 87 | Supply and fixing in replacement of 240 V 10 KA 'C' Curve SP 6-32 Amps complete with connection testing and commissioning complete all as specified and/or directed by Engr-in-Charge |
| 88 | Supply and fixingin replacement Exhaust fan , PVC body AC Single phase 230V of size 250 mm sweep with blades frame and lovers complete all as specifide and directed by Engr-in-charge. |
| 89 | Supply and fixing in replacement of buzzer ,ding dong AC 230 Volts, single pole complete all as specified and/or directed by Engr-in-Charge |
| 90 | Supply and fixing in replacement of bell push, flush type , 5 amp complete all as specified and/or directed by Engr in Charge |
| 91 | Supply and fix in Replacement of electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and/or directed by Engr-in-Charge |
| 92 | Supply and fixing LED Street light fitting 35 watt 230V AC out door type with high pressure die cast aluminium housing and heat resistant complete with driver , lamp bracket with impact and corrosion resistant including thermal management in multiple optix complete with IP65/66 protection complete all as specified and directed by Engr -in-charge. |
| 93 | S&F GI Bracket made out of 32/40mm dia medium grade pipe 1.2m length to bend to shape 120 degrees for fixing on pole and suitable for 35 Watt strret light with 02 Nos clamps of flat iron (40 x4mm) nuts, bolts and washers including painting with two coats of aluminim paint over a coat of primer complete all as .specified and/or directed by Engr-in-Charge |
| 94 | Taking down Old UNSV cable any size cable complete all as specified and/or directed by Engr-in-Charge |
| 95 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following sizes :-25 sq mm ,4 core complete all as specified and/or directed by Engr-in-Charge.Note :- Excavation and Earth work shall be measured and paid separately under respective items. |
| 96 | Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole in hard/dense soil complete all as specified and/or directed by Engr-in-Charge. |
| 97 | Returning, filling in, including spreading, leveling watering, and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed by Engr-in-Charge. |
| 98 | Removing excavated material n.exc 50m and depositing where directed at a level exc. 1.5 cm above the starting point complete all as specified and directed by Engr-in-Charge. |
| 99 | M&L for crushed stone sand cushioning to UG cable, provide with the layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable complete all as specified and directed by Engr-in-Charge. |
| 100 | Labur Only for laying of old serviceble cable cover retrived from excvation complete all as specified and/or directed by Engr-in-Charge |
| 101 | Supply and laid Un-reinforced precast concrete cable cover class LV 1 flat size 250 mm x 150 mm x 40 mm complete all as specified and directed by Engr -in-Charge Please Enable Macros to View BoQ information |
| 102 | Supply and laid Un-reinforced precast concrete cable cover class LV 1 flat size 250 mm x 150 mm x 40 mm complete all as specified and directed by Engr -in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender