|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge All kinds of soil : |
| 2 | Providing and Laying of Stone Soling hand packed including ramming, dressing and watering etc. with all cost and carriage of materials upto site of work complete. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 10 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 11 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 12 | Dry random rubble masonry with hard stone in foundation and plinth: Nallah Stones without bond stones. |
| 13 | Providing and Laying of Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50mm thick with 20 mm nominal size stone aggregate. |
| 14 | Providing and Applying of 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 16 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and paint all complete. |
| 17 | Providing and fixing with Colour coated High rib profile sheet roofing including vertical/curved surface including polymer coated J. or L hooks,fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters including Ridges, hips and valleys complete as per the directions of Incharge Engineer. 0.50mm thick including carriages by mt |
| 18 | Providing and fixing of Soffits Colour coated GI sheets Plain including fixing complete jov including cost of supporting structure of steel, strutting, propping, nails etc all complete as per the directions of Engineer Incharge Engineer. |
| 19 | Providing and fixing of Ornamental Eaves boarding Budloo Wood 250x32mm (nominal size) including priming and colouring as per the directions of Incharge Engineer. |
| 20 | Providing and laying of 18mm thick gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in Charge. |
| 21 | Providing and fixing prefabricated structure excluding cost of beams, columns etc structural steel having following specification wall panells 60mm thick with 0.63mm hard diped galvanised steel sheets on both sides with 60mm thick layers of ridged CFC Free close cell polyurethene fom.ceiling panells 40mm thick made 0.63mm thick hard dipped galvanised steel sheets on both sides with 40mm thick layers of ridged CFC free close cell polyurethene fom including carraige and head load if any complete as per the directions of Incharge Engineer. |
| 22 | Providing and fixing pweder coated onodized aluminium work for windows and door frames with bother shutters of glazed and wire gauge of standard to sections of approved make fixed with sand plugs and screws or disposed fixtures including ACP boarding for pannels, sliding/ fixed including carriage complete as per the directions of Engineer Incharge. |
| 23 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 24 | Providing and fixing of aluminium fittings ISI marked with necessary screws and other fixutes/ fittings etc complete. |
| 25 | Handle 150mm |
| 26 | Handle 100mm |
| 27 | Tower Bolts |
| 28 | Aldrop (Link Lock Type of standard quality and make). |
| 29 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work-exposed on wall with clamps at 1.00 meter spacing including cutting chases and making good the wall including all necessary fittings, bends, tees etc complete as per the directions of Incharge Engineer. |
| 30 | Providing and fixing of Fiber Glass Insulation to the pipe of required thickness to the water supply pipe to protect the pipe from Icing in winter including all necessary fittings and fixtures, fittings charges complete as per the direction of Incharge Engineer. |
| 31 | Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-AL PE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge: Internal work concealed with clamps at 1.00 meter spacing including cutting the chases and making good the wall etc. 1620 (20mm OD) pipe |
| 32 | Provinding and fixing of following PVC pipes (Prince/ Supreme or equivalent brand) having pressure 4KgN/cm incluidng cutting and making good the walls wherever required and other necessary fittings/ fixtures all complete as per the directions of Engineer Incharge. |
| 33 | 100mm dia |
| 34 | 75mm dia |
| 35 | 100mm Collar |
| 36 | 75mm Collar |
| 37 | 100mm Door Bend |
| 38 | S-Trap |
| 39 | Providing and fixing of C.P fittings of approved brand and make (Parko, Jaquar or equivalent Brand) including all necessary fittings and fixtures complete as per the directions of Engineer Incharge. |
| 40 | Bib Cock |
| 41 | Angle Valve |
| 42 | Health Faucet |
| 43 | CP Nipple |
| 44 | Connection 450mm long |
| 45 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 46 | Soap Case |
| 47 | Towel Hooks |
| 48 | CP Gratings |
| 49 | Wall Mixer |
| 50 | Wash Basin Mixer |
| 51 | PVC Waste pipe 32mm dia |
| 52 | Waste Coupling for Washbasin and Sink. |
| 53 | Construction of Brick Masonary Manholes 600x600x600mm in Cement Mortar including cement concrete in 1:2:4 mix inlcuing internal plastering and 50mm concrete flooring, including MS Main hole cover, complete Job as per the directions of Incharge Engineer. |
| 54 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 55 | Providing and fixing fo Wash basin with C.I brackets, 15mm CP brass pillar taps, 32mm CP brase waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls where ever required. White Vitreous China basin size 630x450mm with a pair of 15mm C.P brass pillar taps white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 56 | Providing and fixing of 6mm HPL (High Pressure Lamminate) exterior/Interior grade weather proof craft paper, based on 1\\"x2\\" aluminium framing with rivet fitting including scafflodings staging, necessary fittings and carriage complete job in all aspects. |
| 57 | Provding and fixing of Collapsiable steel shutter and entrance main gate including all fittings, carriage complete as per the directions of Incharge Engineer. |
| 58 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 59 | Carriage of Materials |
| 60 | Sand for an average lead of 20Kms |
| 61 | Stone Aggregate for an average lead of 20Kms. |
| 62 | Bricks for an average lead of 100Kms. |
| 63 | ELECTRICAL WORKS. |
| 64 | Wiring for light point / exhaust /ceiling fan point with (P+N) 2X1.5 sq.mm FRLS- H ( Polycab/Havells/eqt make as approved by site engineer),PVC insulated copper conductor single core cable in surface / recessed Conduits (Anchor/polycab/Ravindra/equivalent make as approved by site engineer) , with 6Amp .modular switch/5amp socket (Anchor roma urban/GM//legrand mylinc/SSK /ABB Tvisha make as approved by site engineer), modular plate, cover in front and suitable GI box etc of approved quality and make ISO/IEC Certified (quality of wire shall be approved before execution of wok by SITE In-charge Engineer strictly as required) job including cost of Circuit Wire in 2.5Sqmm Multi strand Copper wire from Switch board to D.B complete. including cost of Conduits. |
| 65 | Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Polycab/ Make) (Including Cost of Conduit/Channel) |
| 66 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required, ISO/IEC Certified (Anchor roma urban/legrand Mylinc/SSK NV/ABB Tvisha make & shall be approved before execution of work. |
| 67 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including proving and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings), ISO/IEC Certified (Anchor roma urban/legrand Mylinc/SSK NV/ABB Tvisha make & shall be approved before execution of work. |
| 68 | SINGLE POLE (6-32Amp) MCB Legrand /Havells or L&T /Schneider/ABB |
| 69 | Supply installation testing and commissioning of 18 W + LED Surface Mounted Panel light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. |
| 70 | Wiring for heating ponit with (P+N) 2X1.5 sq.mm FRLS- H ( Polycab/Havells/eqt make as approved by site engineer),PVC insulated copper conductor single core cable in surface / recessed Conduits (Anchor/polycab/Ravindra/equivalent make as approved by site engineer) , with 16Amp .socket (Anchor roma urban/legrand mylinc/SSK NV/ABB Tvisha make as approved by site engineer), modular plate, cover in front and suitable GI box etc of approved quality and make ISO/IEC Certified (quality of wire shall be approved before execution of wok by SITE In-charge Engineer strictly as required) job including cost of Circuit Wire in 4qmm Multi strand Copper wire from Switch board to D.B complete. including cost of Conduits. Please Enable Macros to View BoQ information |
