|
| 1 | SUB HEAD A: S&F OF VARIOUS FITTINGS |
| 2 | S&F of 240V, 50Hz, 1ph OLP 3+ Starters with digital display for Split AC Machines (1.5 TR / 2 TR) having rated current 21A, Voltage range 160V-270V, IP20, and provision to display the voltage, current and any fault indication. (Make- Electron) including necy connection (incl supply materials like wires, lugs etc if reqd) and commissioning afterwards. as per the direction of EIC. |
| 3 | Supplying and delivery of LED Industrial Batten light made of CRCA Sheet Body (Thickness ≥ 0.50 mm) and construction as per relevant IS, along with LED lamp (Opal finish polycarbonate housing with Aluminium end-cap) voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range 0o to 40o C, internal surge protection of 2.5 KV(internal) with Short & Open circuit protection , THD < 10% , P.F.≥0.9, IP20, CRI >80, and minimum 40000 Burning Hours (Life projection shall be calculated as per TM-21 methodology), CCT 5700°K /6500°K, and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing, with Minimum 5 year OEM warranty. All test report except L80 should be from 3rd party NABL accredited Lab as per BIS shall be submitted as per the direction of EIC. (System lumen efficacy ≥115 lm/Watt) [Make: Cromptom/ Philips/ Havells/ Wipro] |
| 4 | Single fittings along with S/F of 1 no. 18-20 W LED lamp as per specification |
| 5 | Fixing only single/twin fluroscent light fittings complete with all accessories directly on wall / ceilling with HW block and suitable size MS fastener, ceiling plate, nipples etc as required as per GS. |
| 6 | Supply & Delivery of 240V LED lamps of following wattage with glare free light distribution having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Crompton/ Wipro or manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification] as per the direction of EIC. |
| 7 | 12W LED Bulb B22/E27 Base |
| 8 | Supply & delivery of 230 V, 50 Hz, single phase, 80 watts, 12\\" (300 mm) Sweep, speed 1400 rpm (minimum), A.C. Exhaust Fan and class of insulation: B, 4 nos. metal (Aluminium alloy) blades, copper winding, steel/Al body. Power Factor not less than 0.9 and minimum air delivery 1710 cmh (minimum) including capacitor with safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for compliant to IS 374:2019 and external connections with 1.5 sq.mm FR, PVC insulated copper conductor single core cable and earthing etc. as required as per the direction of EIC. [Make: EPC/ Usha/ Orient/ Crompton] |
| 9 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc as practicable as possible and providing necy length of PVC insulated wire and making connection for exhaust of following diameter:30cm (12\\") |
| 10 | S&F louver shutter on wall with necy bolts & nuts (6mm dia x 62 mm long)For AI - 30cm exhaust fan (12\\") |
| 11 | SUBHEAD B: SITC of AC machines |
| 12 | Supply, Installation, Testing, and Commissioning of air-cooled Hi-Wall split type air conditioners of following capacities comprising Indoor and Outdoor Units with factory-charged Rotary/Scroll compressors (R-32/R-410A) including surface/concealed copper refrigerant piping insulated with closed-cell elastomeric nitrile rubber insulation and wrapping tape (up to 3 m), FRLS type copper power cable (up to 3.5 m) with suitable plug top, 3 meters of drain pipe, and wireless remote control with suitable battery. The system shall operate on 230V, 50Hz (±tolerance as per applicable standard), single-phase AC supply, providing cooling, dehumidification, and air circulation functions conforming to IS-1391 (Part-II ) with all amendments, and shall be capable of efficient performance at outdoor ambient temperatures up to 50°C, with a minimum 5- year OEM warranty on both the compressor and PCB. The system shall be installed with S&F appropriate fixing arrangements as per OEM recommendations, including wall openings, mending well the damages and making necessary connections including T&P & labour etc as required complete in all respect as per the direction of EIC. (Make - Mitsubishi Electric /Daikin /O General/ Mitsubishi Heavy) |
| 13 | Cooling Capacity- 6.1 kW (Minimum) , Air Flow Rate:800 CFM (Minimum) Minimum ISEER - 5.0, BEE level - 4-Star(min) |
| 14 | Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required as per the direction of EIC: |
| 15 | 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm |
| 16 | 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm |
| 17 | S&F of additional following items for length exceeding 3.5 mtr for complete installation and commissioning of aboove AC machines as per the direction of EIC. |
| 18 | 2.5 sqmm, 3/4 core copper cable (FRLS type) |
| 19 | Supply & laying Soft Drawn PVC Drain Pipe 19mm dia with proper supports & brackets as per the direction EIC. |
| 20 | Supplying and refilling of refrigerant gas (R 410/ R 32) charging of ac machine (Split/ Window) as per the direction of the EIC. |
| 21 | PART C: SITC OF INVERTER SET |
| 22 | SITC OF 1750VA/1400 Watt Microtek HEAVY DUTY TURBO NEW 2000 24V Pure Sine Wave Inverter Segment: INVERTER/ HOME UPS , AC Input : 90~300V ± 10V (AC)||180~270V ± 10V(AC); Dimensions: 39.7(L)*27.5(W)*16.6(H)Weight :16.6 Kg , Make: Microtek/Exide/ other reputed make as per the direction EIC. |
| 23 | SITC OF 12V 250AH INVERTER BATTERY -EXIDE (IMTT2500); Dimensions :512x192x466 (MM);Weight :70.29 Kg; Make: Exide/ other reputed make as per the direction EIC. |
| 24 | PART D: SITC OF GYESER SET |
| 25 | SITC of Electric Storage Water Heater of 15 L Capacity, Rated Power 2 kW, Magnatron Prime HSN Cat No. GHWVMGEREW15, White Blue as per the direction of EIC. [Make: Havells/ Crompton or equivalent make] |
| 26 | Note: 1) All the above rates should be quoted inclusive of all taxes, duties and all ancilery charges with cost of maintenance, servicing, supply & replacement of spares for 1 (One) year from the date of commissioning. 2) Total is rounded off to the nearest rupees. Please Enable Macros to View BoQ information |
